全面支持USB接口执行lua程序

This commit is contained in:
armfly 2020-12-24 02:46:44 +08:00
parent 159dbd3a3d
commit c6e12bb709
2109 changed files with 446064 additions and 26102 deletions

View File

@ -1,3 +1,17 @@
----------------------------------------------------------------------------
2020-12-24 V1.44 对应PC软件版本 V1.4.1
1. 传送脱机烧录的文件增加MD5完整性校验并解决文件写入不全的BUG
2. USB虚拟串口功能单独做到扩展功能菜单中其他状态均为PC USB通信模式
3. 取消上电启动lua时蜂鸣一声.
4. 上位机可以无需下载lua文件直接执行临时窗口的lua程序
5. SPI-Flash烧录部分代码解决几个缓冲区size偏小的bug
6. Modbus解码异常时禁止发送应答MODS_SendAckErr(ERR_PACKAGE);
7. 新增文件:nvic_prio_cfg.h 全局统一配置每个中断的优先级
8. 升级STM32H7的HAL库
9. LwIP由2.0.3 升级到2.1.2
10.USB上电延迟2秒后再初始化解决win7下USB使用异常
11.00界面增加USB以太网联机状态指示。g_tVar.LinkState 变量表示联机状态
----------------------------------------------------------------------------
2020-12-17 V1.43 对应PC软件版本 V1.4.0
1.脱机烧录增加苏州国芯的2个M4芯片.

View File

@ -36,7 +36,9 @@
RS232_TX - RS232串口机台信号扩展 START BUSY OK NG
RS232_RX - RS232串口机台信号扩展
---中断优先级---
******************************
中断优先级---
******************************
HAL_NVIC_SetPriority(USART1_IRQn, 0, 1);
HAL_NVIC_SetPriority(UART4_IRQn, 0, 4);
@ -52,7 +54,7 @@ HAL_NVIC_SetPriority(QUADSPI_IRQn, 0x0F, 0); /* 0x0F --> 0x04 要高于USB中
/* 使能MDMA中断并配置优先级 */
QSPI HAL_NVIC_SetPriority(MDMA_IRQn, 0x02, 0);
HAL_NVIC_SetPriority(OTG_HS_IRQn, 0, 0);
HAL_NVIC_SetPriority(OTG_HS_IRQn, 0, 0); --> HAL_NVIC_SetPriority(OTG_HS_IRQn, 1, 0);
HAL_NVIC_SetPriority(SDMMC1_IRQn, 0, 0);
HAL_NVIC_SetPriority(ADC_IRQn, 0, 0);
@ -61,8 +63,38 @@ HAL_NVIC_SetPriority(SDMMC1_IRQn, 0, 0);
HAL_NVIC_SetPriority(CH2_DMA_Stream_IRQn, 1, 0);
【通信协议】
功能码
0x61 : H7-TOOL主动发送比如print信息. 不要求主机应答
/*
主机发送: 小程序数据
01 ; 站号
64 ; 功能码
0000 ; 子功能,
- 0表示下载lua后复位lua环境再执行,
- 1表示下载lua后不复位lua环境直接执行
- 2表示 list目录下的文件
- 3表示读取文件MD5码
- 4表示删除文件 del
- 5表示删除目录和文件
- 6表示读文件数据
- 7表示覆盖文件写新文件
0100 0000 ; 总长度 4字节
0000 0000 : 偏移地址 4字节
0020 0000 : 本包数据长度 4字节
xx ... xx : 程序数据n个
CCCC : CRC16
从机应答:
01 ; 从机地址
64 ; 功能码
0000 ; 子功能
00 ; 执行结果0表示OK 1表示错误
CCCC : CRC16
*/

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -3991,7 +3991,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -24984,14 +24984,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -25008,9 +25010,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4086,7 +4086,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -25632,14 +25632,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -25658,9 +25660,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4189,7 +4189,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -26404,14 +26404,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -26430,9 +26432,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4272,7 +4272,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -29577,14 +29577,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -29603,9 +29605,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4162,7 +4162,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -25918,14 +25918,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -25944,9 +25946,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4162,7 +4162,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -25919,14 +25919,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -25945,9 +25947,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4265,7 +4265,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -26691,14 +26691,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -26717,9 +26719,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4348,7 +4348,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -29864,14 +29864,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -29890,9 +29892,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -3942,7 +3942,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -21676,14 +21676,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -21703,9 +21705,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -3943,7 +3943,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -21688,14 +21688,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -21715,9 +21717,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4077,7 +4077,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -22166,14 +22166,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -22193,9 +22195,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4078,7 +4078,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -22178,14 +22178,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -22205,9 +22207,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4077,7 +4077,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -22167,14 +22167,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -22194,9 +22196,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -4078,7 +4078,7 @@ typedef struct
/***************** Bit definition for FDCAN_ECR register *********************/
#define FDCAN_ECR_TEC_Pos (0U)
#define FDCAN_ECR_TEC_Msk (0xFUL << FDCAN_ECR_TEC_Pos) /*!< 0x0000000F */
#define FDCAN_ECR_TEC_Msk (0xFFUL << FDCAN_ECR_TEC_Pos) /*!< 0x000000FF */
#define FDCAN_ECR_TEC FDCAN_ECR_TEC_Msk /*!<Transmit Error Counter */
#define FDCAN_ECR_REC_Pos (8U)
#define FDCAN_ECR_REC_Msk (0x7FUL << FDCAN_ECR_REC_Pos) /*!< 0x00007F00 */
@ -22179,14 +22179,16 @@ typedef struct
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/****************************** SMBUS Instances *******************************/
#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
((INSTANCE) == I2C2) || \
((INSTANCE) == I2C3) || \
((INSTANCE) == I2C4))
/************** I2C Instances : wakeup capability from stop modes *************/
#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE)
/******************************** I2S Instances *******************************/
#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \
@ -22206,9 +22208,6 @@ typedef struct
#define IS_SDMMC_ALL_INSTANCE(_INSTANCE_) (((_INSTANCE_) == SDMMC1) || \
((_INSTANCE_) == SDMMC2))
/******************************** SMBUS Instances *****************************/
#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
/******************************** SPI Instances *******************************/
#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
((INSTANCE) == SPI2) || \

View File

@ -60,7 +60,8 @@
#if !defined (STM32H743xx) && !defined (STM32H753xx) && !defined (STM32H750xx) && !defined (STM32H742xx) && \
!defined (STM32H745xx) && !defined (STM32H755xx) && !defined (STM32H747xx) && !defined (STM32H757xx) && \
!defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx) && !defined (STM32H7B0xxQ)
!defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx) && !defined (STM32H7B0xxQ) && \
!defined (STM32H735xx) && !defined (STM32H733xx) && !defined (STM32H730xx) && !defined (STM32H730xxQ) && !defined (STM32H725xx) && !defined (STM32H723xx)
/* #define STM32H742xx */ /*!< STM32H742VI, STM32H742ZI, STM32H742AI, STM32H742II, STM32H742BI, STM32H742XI Devices */
/* #define STM32H743xx */ /*!< STM32H743VI, STM32H743ZI, STM32H743AI, STM32H743II, STM32H743BI, STM32H743XI Devices */
/* #define STM32H753xx */ /*!< STM32H753VI, STM32H753ZI, STM32H753AI, STM32H753II, STM32H753BI, STM32H753XI Devices */
@ -74,6 +75,12 @@
/* #define STM32H7A3xxQ */ /*!< STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q */
/* #define STM32H7B3xx */ /*!< STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6 */
/* #define STM32H7B3xxQ */ /*!< STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q */
/* #define STM32H735xx */ /*!< STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices */
/* #define STM32H733xx */ /*!< STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices */
/* #define STM32H730xx */ /*!< STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices */
/* #define STM32H730xxQ */ /*!< STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices */
/* #define STM32H725xx */ /*!< STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6 Devices */
/* #define STM32H723xx */ /*!< STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
@ -94,10 +101,10 @@
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V1.8.0
* @brief CMSIS Device version number V1.9.0
*/
#define __STM32H7xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 (0x08) /*!< [23:16] sub1 version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 (0x09) /*!< [23:16] sub1 version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32H7xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
@ -141,6 +148,18 @@
#include "stm32h7a3xxq.h"
#elif defined(STM32H7B3xxQ)
#include "stm32h7b3xxq.h"
#elif defined(STM32H735xx)
#include "stm32h735xx.h"
#elif defined(STM32H733xx)
#include "stm32h733xx.h"
#elif defined(STM32H730xx)
#include "stm32h730xx.h"
#elif defined(STM32H730xxQ)
#include "stm32h730xxq.h"
#elif defined(STM32H725xx)
#include "stm32h725xx.h"
#elif defined(STM32H723xx)
#include "stm32h723xx.h"
#else
#error "Please select first the target STM32H7xx device used in your application (in stm32h7xx.h file)"
#endif

View File

@ -11,7 +11,7 @@
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
<link rel="stylesheet" href="../../../../../_htmresc/mini-st.css" />
<link rel="stylesheet" href="_htmresc/mini-st.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
@ -25,7 +25,7 @@
<h1 id="release-notes-for-stm32h7xx-cmsis"><strong>Release Notes for STM32H7xx CMSIS</strong></h1>
<p>Copyright © 2017 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img src="../../../../../_htmresc/st_logo.png" alt="ST logo" /></a>
<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a>
</center>
</div>
</div>
@ -38,10 +38,119 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="col-sm-12 col-lg-8">
<h1 id="update-history"><strong>Update History</strong></h1>
<div class="collapse">
<input type="checkbox" id="collapse-section8" checked aria-hidden="true"> <label for="collapse-section8" aria-hidden="true"><strong>V1.6.0 / 28-June-2019</strong></label>
<input type="checkbox" id="collapse-section11" checked aria-hidden="true"> <label for="collapse-section11" aria-hidden="true"><strong>V1.9.0 / 29-May-2020</strong></label>
<div>
<h2 id="main-changes">Main Changes</h2>
<ul>
<li>Add support of stm32h723xx, stm32h725xx, stm32h733xx, stm32h735xx, stm32h730xx and stm32h730xxQ devices:
<ul>
<li>Add “stm32h723xx.h” , “stm32h725xx.h”, “stm32h733xx.h”, “stm32h735xx.h”, “stm32h730xx.h” and “stm32h730xxq.h” files</li>
<li>Add startup files “startup_stm32h723xx.s”, “startup_stm32h725xx.s”, “startup_stm32h733xx.s”, “startup_stm32h735xx.s”, “startup_stm32h730xx.s” and “startup_stm32h730xxq.s” for EWARM , MDK-ARM and GCC toolchains</li>
<li>Add part numbers list to stm32h7xx.h header file:
<ul>
<li>STM32H723xx: STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices</li>
<li>STM32H725xx: STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6 Devices</li>
<li>STM32H733xx: STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices</li>
<li>STM32H735xx: STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices</li>
<li>STM32H730xx: STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices</li>
<li><p>STM32H730xxQ: STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices</p></li>
<li>Add EWARM STM32H723xx, STM32H725xx, STM32H733xx, STM32H735xx, STM32H730xx and STM32H730xxQ devices linker files (1MB flash) for EWARM toolchain</li>
<li><p>Add EWARM STM32H723xE and STM32H725xE devices linker files (<strong>Subset 512KB flash</strong>) for EWARM toolchain</p></li>
</ul></li>
<li>Note : <strong>stm32h730xx</strong> and <strong>stm32h730xxQ</strong> are <strong>Value line</strong> devices with 128KB flash:</li>
</ul></li>
<li>Update STM32H7 devices header files:
<ul>
<li>Fix FDCAN_ECR_TEC_Msk definition (8 bits bit field instead of 4)</li>
<li>Fix IS_SMBUS_INSTANCE macro definition with the right instances list for each STM32H7 line</li>
</ul></li>
<li>Update system_stm32h7xx.c, system_stm32h7xx_dualcore_boot_cm4_cm7.c, system_stm32h7xx_dualcore_bootcm4_cm7gated.c, system_stm32h7xx_dualcore_bootcm7_cm4gated.c and system_stm32h7xx_singlecore.c files to:
<ul>
<li>Add Flash latency settings depending of the previous CPU frequency (Increasing or decreasing the CPU frequency)<br />
</li>
<li>Fix RCC registers reset values settings</li>
<li>Disable the FMC bank1 (enabled after reset)
<ul>
<li>This prevents CPU speculation access on this bank which blocks the use of FMC during 24us. During this time the others FMC master (such as LTDC) cannot use it<br />
</li>
</ul></li>
</ul></li>
<li>Update system_stm32h7xx.c, system_stm32h7xx_dualcore_boot_cm4_cm7.c, system_stm32h7xx_dualcore_bootcm4_cm7gated.c and system_stm32h7xx_dualcore_bootcm7_cm4gated.c to:
<ul>
<li>Use D2_AXISRAM_BASE for Coretx-M4 VTOR when executing from RAM instead of D2_AHBSRAM_BASE
<ul>
<li>Note: both addresses are aliases to the same D2 domain physical RAM. D2_AXISRAM_BASE (<span class="citation" data-cites="0x10000000">@0x10000000</span>) gives access to the RAM with access using Instruction bus (I), where D2_AHBSRAM_BASE(<span class="citation" data-cites="0x30000000">@0x30000000</span>) gives access to the RAM with access using Data bus. thus when executing from this D2 RAM it is recommended to use D2_AXISRAM_BASE alias so the execution scheme respects the Harvard architecture (One bus for data and one bus for instructions).</li>
</ul></li>
</ul></li>
<li>Update system_stm32h7xx.c and system_stm32h7xx_dualcore_boot_cm4_cm7.c to:
<ul>
<li>Fix usage of SCB-&gt;SCR register: SEVONPEND enabled so that an interrupt generated by the other CPU triggers an event and wakes up the current CPU after a WFI/WFE instruction even if the interrupt is disabled</li>
</ul></li>
<li>Add EWARM, linker files for STM32H742xG and STM32H743xG devices coming with 1MB flash: 512KB for each bank</li>
<li><p>Add EWARM, MDK-ARM and GCC linker files for STM32H745xG and STM32H747xG devices coming with 1MB flash: 512KB for each bank</p></li>
<li>Update GCC startup files for all devices to align sequence to EWARM/MDK-ARM by calling “SystemInit” prior to any memory access
<ul>
<li>Allowing to avoid issues when using external memories</li>
</ul></li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true"><strong>V1.8.0 / 14-February-2020</strong></label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<ul>
<li>General updates to align Bits and registers definitions with the STM32H7 reference manual</li>
<li>Update “ErrorStatus” enumeration definition in stm32h7xx.h file with SUCCESS set to numerical value zero</li>
<li>Add definition of DMA_SxCR_TRBUFF bit field of DMA SxCR register allowing to enabled/disable bufferable transfers</li>
<li>Remove RCC_AHB2ENR_CRYPEN/RCC_AHB2RSTR_CRYPRST/RCC_AHB2LPENR_CRYPLPEN and RCC_AHB2ENR_HASHEN/RCC_AHB2RSTR_HASHRST/RCC_AHB2LPENR_HASHLPEN from H7 devices that doesnt support CRYP/HASH (STM32H742/43/45/47/A3)</li>
<li>Add STM32H7_DEV_ID define allowing to identify the H7 Device ID</li>
<li>Update OCTOSPIM_TypeDef structure definition with 3 PCR registers instead of 8 (on STM32H7A3/B3/B0 devices supporting OctoSPI)</li>
<li>Add definition for OCTOSPIM_CR_MUXEN and OCTOSPIM_CR_REQ2ACK_TIME in order to support OctoSPI IO Manager multiplexed mode feature (on STM32H7A3/B3/B0 devices supporting OctoSPI)</li>
<li>Update system_stm32h7xx.c to reflect the current core clock in SystemCoreClock global variable (Corex-M7 or Corext-M4 clock depending of the current context in case of Dual Core)</li>
<li>Add EWARM linker files for STM32H7A3 devices with reduced Flash size to 1MB:
<ul>
<li>stm32h7a3xg_flash.icf, stm32h7a3xg_flash_rw_sram1.icf, stm32h7a3xg_flash_rw_sram2.icf.</li>
<li>stm32h7a3xgq_flash.icf, stm32h7a3xgq_flash_rw_sram1.icf, stm32h7a3xgq_flash_rw_sram2.icf.</li>
</ul></li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true"><strong>V1.7.0 / 06-December-2019</strong></label>
<div>
<h2 id="main-changes-2">Main Changes</h2>
<ul>
<li><p>General updates to align Bit and registers definition with the STM32H7 reference manual</p></li>
<li>Add support of stm32h7A3xx, stm32h7A3xxQ, stm32h7B3xx, stm32h7B3xxQ, stm32h7B0xx and stm32h7B0xxQ devices:
<ul>
<li>Add “stm32h7a3xx.h”, “stm32h7a3xxq.h”, “stm32h7b3xx.h”, “stm32h7b3xxq.h”, “stm32h7b0xx.h” and “stm32h7b0xxq.h” files</li>
<li>Add startup files “startup_stm32h7a3xx.s”, “startup_stm32h7a3xxq.s”, “startup_stm32h7b3xx.s”, “startup_stm32h7b3xxq.s”, “startup_stm32h7b0xx.s” and “startup_stm32h7b0xxq.s” for EWARM , MDK-ARM and STM32CubeIDE toolchains</li>
<li>Add part numbers list to stm32h7xx.h header file:
<ul>
<li>STM32H7A3xx : STM32H7A3IIK6, STM32H7A3IIT6, STM32H7A3NIH6, STM32H7A3RIT6, STM32H7A3VIH6, STM32H7A3VIT6, STM32H7A3ZIT6</li>
<li>STM32H7A3xxQ : STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q</li>
<li>STM32H7B3xx : STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6</li>
<li>STM32H7B3xxQ : STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q</li>
<li>STM32H7B0xx : STM32H7B0ABIxQ, STM32H7B0IBTx, STM32H7B0RBTx, STM32H7B0VBTx, STM32H7B0ZBTx, STM32H7B0IBKxQ</li>
</ul></li>
</ul></li>
<li>Update DMA2D bits definitions: Update to support Line offset mode and swap bytes features
<ul>
<li>Add CR_LOM (Line Ofset Mode) bit definition, Add OPFCCR_SB (Swap Bytes) bit definition</li>
<li>Update CR_MODE, FGOR_LO, BGOR_LO and OOR_LO bit definition</li>
</ul></li>
<li>Update USB_OTG_GAHBCFG bit definition: to be aligned with LL_USB usage</li>
<li><p>Add USB_OTG_DOEPMSK_AHBERRM, USB_OTG_DOEPMSK_BERRM, USB_OTG_DOEPMSK_NAKM, USB_OTG_DOEPMSK_NYETM, USB_OTG_DIEPINT_AHBERR, USB_OTG_DIEPINT_INEPNM, USB_OTG_DOEPINT_AHBERR, USB_OTG_DOEPINT_OUTPKTERR, USB_OTG_DOEPINT_BERR, USB_OTG_DOEPINT_NAK and USB_OTG_DOEPINT_STPKTRX bit definitions</p></li>
<li><p>Update IS_TIM_REMAP_INSTANCE and IS_TIM_SYNCHRO_INSTANCE macro implemenation</p></li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true"><strong>V1.6.0 / 28-June-2019</strong></label>
<div>
<h2 id="main-changes-3">Main Changes</h2>
<ul>
<li>Add definition of “ART_TypeDef” structure: ART accelerator for Cortex-M4 available in Dual Core devices</li>
<li>Add definition of “ART” instance: pointer to “ART_TypeDef” structure</li>
<li>Add definition of “ART” bit fields: ART_CTR_EN and ART_CTR_PCACHEADDR<br />
@ -53,9 +162,9 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section7" checked aria-hidden="true"> <label for="collapse-section7" aria-hidden="true"><strong>V1.5.0 / 05-April-2019</strong></label>
<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true"><strong>V1.5.0 / 05-April-2019</strong></label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<h2 id="main-changes-4">Main Changes</h2>
<ul>
<li>General updates to align Bit and registers definition with the STM32H7 reference manual</li>
<li>Updates to aligned with STM32H7xx <strong>rev.V</strong> devices</li>
@ -119,7 +228,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true"><strong>V1.3.1 / 31-January-2019</strong></label>
<div>
<h2 id="main-changes-2">Main Changes</h2>
<h2 id="main-changes-5">Main Changes</h2>
<ul>
<li><strong>Patch Release on top of V1.3.0</strong></li>
<li>Add Definition of UID_BASE ( Unique device ID register base address) to the STM32H7xx include files:
@ -132,7 +241,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true"><strong>V1.4.0 / 30-November-2018</strong></label>
<div>
<h2 id="main-changes-3">Main Changes</h2>
<h2 id="main-changes-6">Main Changes</h2>
<ul>
<li>STM32H7xx include files:
<ul>
@ -177,7 +286,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.3.0 / 29-June-2018</strong></label>
<div>
<h2 id="main-changes-4">Main Changes</h2>
<h2 id="main-changes-7">Main Changes</h2>
<ul>
<li>Add support for stm32h750xx value line devices:
<ul>
@ -190,7 +299,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true"><strong>V1.2.0 / 29-December-2017</strong></label>
<div>
<h2 id="main-changes-5">Main Changes</h2>
<h2 id="main-changes-8">Main Changes</h2>
<ul>
<li>Update FDCAN bit definition</li>
<li>Update SystemCoreClockUpdate() function in system_stm32h7xx.c file to use direct register access</li>
@ -200,7 +309,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.1.0 / 31-August-2017</strong></label>
<div>
<h2 id="main-changes-6">Main Changes</h2>
<h2 id="main-changes-9">Main Changes</h2>
<ul>
<li>Update USB OTG bit definition</li>
<li>Adjust PLL fractional computation</li>
@ -210,7 +319,7 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 21-April-2017</strong></label>
<div>
<h2 id="main-changes-7">Main Changes</h2>
<h2 id="main-changes-10">Main Changes</h2>
<ul>
<li>First official release for <strong>STM32H743xx/753xx</strong> devices</li>
</ul>

View File

@ -0,0 +1,14 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08100000 0x00080000 { ; load region size_region
ER_IROM1 0x08100000 0x00080000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x10000000 0x10048000{ ; RW data
.ANY (+RW +ZI)
}
}

View File

@ -0,0 +1,14 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00080000 { ; load region size_region
ER_IROM1 0x08000000 0x00080000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x20000000 0x20020000{ ; RW data
.ANY (+RW +ZI)
}
}

View File

@ -0,0 +1,14 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08100000 0x00080000 { ; load region size_region
ER_IROM1 0x08100000 0x00080000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x10000000 0x10048000{ ; RW data
.ANY (+RW +ZI)
}
}

View File

@ -0,0 +1,14 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00080000 { ; load region size_region
ER_IROM1 0x08000000 0x00080000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x20000000 0x20020000{ ; RW data
.ANY (+RW +ZI)
}
}

View File

@ -0,0 +1,618 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h723xx.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD 0 ; Reserved
DCD RNG_IRQHandler ; Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,618 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h725xx.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD 0 ; Reserved
DCD RNG_IRQHandler ; Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,624 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h730xx.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD CRYP_IRQHandler ; CRYP
DCD HASH_RNG_IRQHandler ; Hash and Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD OTFDEC1_IRQHandler ; OTFDEC1 Interrupt
DCD OTFDEC2_IRQHandler ; OTFDEC2 Interrupt
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT CRYP_IRQHandler [WEAK]
EXPORT HASH_RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT OTFDEC1_IRQHandler [WEAK]
EXPORT OTFDEC2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
CRYP_IRQHandler
HASH_RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
OTFDEC1_IRQHandler
OTFDEC2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,624 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h730xxq.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD CRYP_IRQHandler ; CRYP
DCD HASH_RNG_IRQHandler ; Hash and Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD OTFDEC1_IRQHandler ; OTFDEC1 Interrupt
DCD OTFDEC2_IRQHandler ; OTFDEC2 Interrupt
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT CRYP_IRQHandler [WEAK]
EXPORT HASH_RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT OTFDEC1_IRQHandler [WEAK]
EXPORT OTFDEC2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
CRYP_IRQHandler
HASH_RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
OTFDEC1_IRQHandler
OTFDEC2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,624 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h733xx.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD CRYP_IRQHandler ; CRYP
DCD HASH_RNG_IRQHandler ; Hash and Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD OTFDEC1_IRQHandler ; OTFDEC1 Interrupt
DCD OTFDEC2_IRQHandler ; OTFDEC2 Interrupt
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT CRYP_IRQHandler [WEAK]
EXPORT HASH_RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT OTFDEC1_IRQHandler [WEAK]
EXPORT OTFDEC2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
CRYP_IRQHandler
HASH_RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
OTFDEC1_IRQHandler
OTFDEC2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,624 @@
;******************** (C) COPYRIGHT 2019 STMicroelectronics ********************
;* File Name : startup_stm32h735xx.s
;* @author MCD Application Team
;* Description : STM32H7xx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;******************************************************************************
;* @attention
;*
;* Copyright (c) 2019 STMicroelectronics.
;* All rights reserved.
;*
;* This software component is licensed by ST under BSD 3-Clause license,
;* the "License"; You may not use this file except in compliance with the
;* License. You may obtain a copy of the License at:
;* opensource.org/licenses/BSD-3-Clause
;*
;******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it)
DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2
DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0
DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0
DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1
DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt
DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
DCD OTG_HS_IRQHandler ; USB OTG HS
DCD DCMI_PSSI_IRQHandler ; DCMI, PSSI
DCD CRYP_IRQHandler ; CRYP
DCD HASH_RNG_IRQHandler ; Hash and Rng
DCD FPU_IRQHandler ; FPU
DCD UART7_IRQHandler ; UART7
DCD UART8_IRQHandler ; UART8
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
DCD SPI6_IRQHandler ; SPI6
DCD SAI1_IRQHandler ; SAI1
DCD LTDC_IRQHandler ; LTDC
DCD LTDC_ER_IRQHandler ; LTDC error
DCD DMA2D_IRQHandler ; DMA2D
DCD 0 ; Reserved
DCD OCTOSPI1_IRQHandler ; OCTOSPI1
DCD LPTIM1_IRQHandler ; LPTIM1
DCD CEC_IRQHandler ; HDMI_CEC
DCD I2C4_EV_IRQHandler ; I2C4 Event
DCD I2C4_ER_IRQHandler ; I2C4 Error
DCD SPDIF_RX_IRQHandler ; SPDIF_RX
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt
DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TIM15_IRQHandler ; TIM15 global Interrupt
DCD TIM16_IRQHandler ; TIM16 global Interrupt
DCD TIM17_IRQHandler ; TIM17 global Interrupt
DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt
DCD MDIOS_IRQHandler ; MDIOS global Interrupt
DCD 0 ; Reserved
DCD MDMA_IRQHandler ; MDMA global Interrupt
DCD 0 ; Reserved
DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt
DCD HSEM1_IRQHandler ; HSEM1 global Interrupt
DCD 0 ; Reserved
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt
DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt
DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt
DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt
DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt
DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt
DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt
DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt
DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt
DCD COMP1_IRQHandler ; COMP1 global Interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt
DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt
DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt
DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD 0 ; Reserved
DCD CRS_IRQHandler ; Clock Recovery Global Interrupt
DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt
DCD SAI4_IRQHandler ; SAI4 global interrupt
DCD DTS_IRQHandler ; DTS interrupt
DCD 0 ; Reserved
DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins
DCD OCTOSPI2_IRQHandler ; OCTOSPI2 Interrupt
DCD OTFDEC1_IRQHandler ; OTFDEC1 Interrupt
DCD OTFDEC2_IRQHandler ; OTFDEC2 Interrupt
DCD FMAC_IRQHandler ; FMAC Interrupt
DCD CORDIC_IRQHandler ; CORDIC Interrupt
DCD UART9_IRQHandler ; UART9 Interrupt
DCD USART10_IRQHandler ; UART10 Interrupt
DCD I2C5_EV_IRQHandler ; I2C5 Event Interrupt
DCD I2C5_ER_IRQHandler ; I2C5 Error Interrupt
DCD FDCAN3_IT0_IRQHandler ; FDCAN3 interrupt line 0
DCD FDCAN3_IT1_IRQHandler ; FDCAN3 interrupt line 1
DCD TIM23_IRQHandler ; TIM23 global interrup
DCD TIM24_IRQHandler ; TIM24 global interrup
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_AVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT FDCAN1_IT0_IRQHandler [WEAK]
EXPORT FDCAN2_IT0_IRQHandler [WEAK]
EXPORT FDCAN1_IT1_IRQHandler [WEAK]
EXPORT FDCAN2_IT1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT FDCAN_CAL_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
EXPORT OTG_HS_IRQHandler [WEAK]
EXPORT DCMI_PSSI_IRQHandler [WEAK]
EXPORT CRYP_IRQHandler [WEAK]
EXPORT HASH_RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT UART7_IRQHandler [WEAK]
EXPORT UART8_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
EXPORT SPI6_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT LTDC_IRQHandler [WEAK]
EXPORT LTDC_ER_IRQHandler [WEAK]
EXPORT DMA2D_IRQHandler [WEAK]
EXPORT OCTOSPI1_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT I2C4_EV_IRQHandler [WEAK]
EXPORT I2C4_ER_IRQHandler [WEAK]
EXPORT SPDIF_RX_IRQHandler [WEAK]
EXPORT DMAMUX1_OVR_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT MDIOS_WKUP_IRQHandler [WEAK]
EXPORT MDIOS_IRQHandler [WEAK]
EXPORT MDMA_IRQHandler [WEAK]
EXPORT SDMMC2_IRQHandler [WEAK]
EXPORT HSEM1_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT DMAMUX2_OVR_IRQHandler [WEAK]
EXPORT BDMA_Channel0_IRQHandler [WEAK]
EXPORT BDMA_Channel1_IRQHandler [WEAK]
EXPORT BDMA_Channel2_IRQHandler [WEAK]
EXPORT BDMA_Channel3_IRQHandler [WEAK]
EXPORT BDMA_Channel4_IRQHandler [WEAK]
EXPORT BDMA_Channel5_IRQHandler [WEAK]
EXPORT BDMA_Channel6_IRQHandler [WEAK]
EXPORT BDMA_Channel7_IRQHandler [WEAK]
EXPORT COMP1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT LPTIM3_IRQHandler [WEAK]
EXPORT LPTIM4_IRQHandler [WEAK]
EXPORT LPTIM5_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
EXPORT ECC_IRQHandler [WEAK]
EXPORT SAI4_IRQHandler [WEAK]
EXPORT DTS_IRQHandler [WEAK]
EXPORT WAKEUP_PIN_IRQHandler [WEAK]
EXPORT OCTOSPI2_IRQHandler [WEAK]
EXPORT OTFDEC1_IRQHandler [WEAK]
EXPORT OTFDEC2_IRQHandler [WEAK]
EXPORT FMAC_IRQHandler [WEAK]
EXPORT CORDIC_IRQHandler [WEAK]
EXPORT UART9_IRQHandler [WEAK]
EXPORT USART10_IRQHandler [WEAK]
EXPORT I2C5_EV_IRQHandler [WEAK]
EXPORT I2C5_ER_IRQHandler [WEAK]
EXPORT FDCAN3_IT0_IRQHandler [WEAK]
EXPORT FDCAN3_IT1_IRQHandler [WEAK]
EXPORT TIM23_IRQHandler [WEAK]
EXPORT TIM24_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_AVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
FDCAN1_IT0_IRQHandler
FDCAN2_IT0_IRQHandler
FDCAN1_IT1_IRQHandler
FDCAN2_IT1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
DMA1_Stream7_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
FDCAN_CAL_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
OTG_HS_EP1_OUT_IRQHandler
OTG_HS_EP1_IN_IRQHandler
OTG_HS_WKUP_IRQHandler
OTG_HS_IRQHandler
DCMI_PSSI_IRQHandler
CRYP_IRQHandler
HASH_RNG_IRQHandler
FPU_IRQHandler
UART7_IRQHandler
UART8_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
SPI6_IRQHandler
SAI1_IRQHandler
LTDC_IRQHandler
LTDC_ER_IRQHandler
DMA2D_IRQHandler
OCTOSPI1_IRQHandler
LPTIM1_IRQHandler
CEC_IRQHandler
I2C4_EV_IRQHandler
I2C4_ER_IRQHandler
SPDIF_RX_IRQHandler
DMAMUX1_OVR_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
DFSDM1_FLT3_IRQHandler
SWPMI1_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
MDIOS_WKUP_IRQHandler
MDIOS_IRQHandler
MDMA_IRQHandler
SDMMC2_IRQHandler
HSEM1_IRQHandler
ADC3_IRQHandler
DMAMUX2_OVR_IRQHandler
BDMA_Channel0_IRQHandler
BDMA_Channel1_IRQHandler
BDMA_Channel2_IRQHandler
BDMA_Channel3_IRQHandler
BDMA_Channel4_IRQHandler
BDMA_Channel5_IRQHandler
BDMA_Channel6_IRQHandler
BDMA_Channel7_IRQHandler
COMP1_IRQHandler
LPTIM2_IRQHandler
LPTIM3_IRQHandler
LPTIM4_IRQHandler
LPTIM5_IRQHandler
LPUART1_IRQHandler
CRS_IRQHandler
ECC_IRQHandler
SAI4_IRQHandler
DTS_IRQHandler
WAKEUP_PIN_IRQHandler
OCTOSPI2_IRQHandler
OTFDEC1_IRQHandler
OTFDEC2_IRQHandler
FMAC_IRQHandler
CORDIC_IRQHandler
UART9_IRQHandler
USART10_IRQHandler
I2C5_EV_IRQHandler
I2C5_ER_IRQHandler
FDCAN3_IT0_IRQHandler
FDCAN3_IT1_IRQHandler
TIM23_IRQHandler
TIM24_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

View File

@ -0,0 +1,172 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
**
** Abstract : Linker script for STM32H7 series
** 512Kbytes FLASH and 288Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed <20>as is,<2C> without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** Copyright (c) 2020 STMicroelectronics.
** All rights reserved.
**
** This software component is licensed by ST under BSD 3-Clause license,
** the "License"; You may not use this file except in compliance with the
** License. You may obtain a copy of the License at:
** opensource.org/licenses/BSD-3-Clause
**
****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x10048000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08100000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x10000000, LENGTH = 288K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,173 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
**
** Abstract : Linker script for STM32H7 series
** 512Kbytes FLASH and 192Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed <20>as is,<2C> without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** Copyright (c) 2020 STMicroelectronics.
** All rights reserved.
**
** This software component is licensed by ST under BSD 3-Clause license,
** the "License"; You may not use this file except in compliance with the
** License. You may obtain a copy of the License at:
** opensource.org/licenses/BSD-3-Clause
**
****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,172 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
**
** Abstract : Linker script for STM32H7 series
** 512Kbytes FLASH and 288Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed <20>as is,<2C> without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** Copyright (c) 2020 STMicroelectronics.
** All rights reserved.
**
** This software component is licensed by ST under BSD 3-Clause license,
** the "License"; You may not use this file except in compliance with the
** License. You may obtain a copy of the License at:
** opensource.org/licenses/BSD-3-Clause
**
****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x10048000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08100000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x10000000, LENGTH = 288K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,173 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
**
** Abstract : Linker script for STM32H7 series
** 512Kbytes FLASH and 192Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed <20>as is,<2C> without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** Copyright (c) 2020 STMicroelectronics.
** All rights reserved.
**
** This software component is licensed by ST under BSD 3-Clause license,
** the "License"; You may not use this file except in compliance with the
** License. You may obtain a copy of the License at:
** opensource.org/licenses/BSD-3-Clause
**
****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,756 @@
/**
******************************************************************************
* @file startup_stm32h723xx.s
* @author MCD Application Team
* @brief STM32H723xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word 0 /* Reserved */
.word RNG_IRQHandler /* Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,756 @@
/**
******************************************************************************
* @file startup_stm32h725xx.s
* @author MCD Application Team
* @brief STM32H725xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word 0 /* Reserved */
.word RNG_IRQHandler /* Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,765 @@
/**
******************************************************************************
* @file startup_stm32h730xx.s
* @author MCD Application Team
* @brief STM32H730xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word CRYP_IRQHandler /* CRYP */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word OTFDEC1_IRQHandler /* OTFDEC1 Interrupt */
.word OTFDEC2_IRQHandler /* OTFDEC2 Interrupt */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak CRYP_IRQHandler
.thumb_set CRYP_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak OTFDEC1_IRQHandler
.thumb_set OTFDEC1_IRQHandler,Default_Handler
.weak OTFDEC2_IRQHandler
.thumb_set OTFDEC2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,765 @@
/**
******************************************************************************
* @file startup_stm32h730xxq.s
* @author MCD Application Team
* @brief STM32H730xxQ Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word CRYP_IRQHandler /* CRYP */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word OTFDEC1_IRQHandler /* OTFDEC1 Interrupt */
.word OTFDEC2_IRQHandler /* OTFDEC2 Interrupt */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak CRYP_IRQHandler
.thumb_set CRYP_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak OTFDEC1_IRQHandler
.thumb_set OTFDEC1_IRQHandler,Default_Handler
.weak OTFDEC2_IRQHandler
.thumb_set OTFDEC2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,765 @@
/**
******************************************************************************
* @file startup_stm32h733xx.s
* @author MCD Application Team
* @brief STM32H733xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word CRYP_IRQHandler /* CRYP */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word OTFDEC1_IRQHandler /* OTFDEC1 Interrupt */
.word OTFDEC2_IRQHandler /* OTFDEC2 Interrupt */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak CRYP_IRQHandler
.thumb_set CRYP_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak OTFDEC1_IRQHandler
.thumb_set OTFDEC1_IRQHandler,Default_Handler
.weak OTFDEC2_IRQHandler
.thumb_set OTFDEC2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,765 @@
/**
******************************************************************************
* @file startup_stm32h735xx.s
* @author MCD Application Team
* @brief STM32H735xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */
.word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */
.word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */
.word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */
.word TIM1_UP_IRQHandler /* TIM1 Update interrupt */
.word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word 0 /* Reserved */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_PSSI_IRQHandler /* DCMI, PSSI */
.word CRYP_IRQHandler /* CRYP */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word 0 /* Reserved */
.word OCTOSPI1_IRQHandler /* OCTOSPI1 */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */
.word 0 /* Reserved */
.word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */
.word TIM15_IRQHandler /* TIM15 global Interrupt */
.word TIM16_IRQHandler /* TIM16 global Interrupt */
.word TIM17_IRQHandler /* TIM17 global Interrupt */
.word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */
.word MDIOS_IRQHandler /* MDIOS global Interrupt */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* MDMA global Interrupt */
.word 0 /* Reserved */
.word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */
.word HSEM1_IRQHandler /* HSEM1 global Interrupt */
.word 0 /* Reserved */
.word ADC3_IRQHandler /* ADC3 global Interrupt */
.word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */
.word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */
.word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */
.word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */
.word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */
.word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */
.word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */
.word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */
.word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */
.word COMP1_IRQHandler /* COMP1 global Interrupt */
.word LPTIM2_IRQHandler /* LP TIM2 global interrupt */
.word LPTIM3_IRQHandler /* LP TIM3 global interrupt */
.word LPTIM4_IRQHandler /* LP TIM4 global interrupt */
.word LPTIM5_IRQHandler /* LP TIM5 global interrupt */
.word LPUART1_IRQHandler /* LP UART1 interrupt */
.word 0 /* Reserved */
.word CRS_IRQHandler /* Clock Recovery Global Interrupt */
.word ECC_IRQHandler /* ECC diagnostic Global Interrupt */
.word SAI4_IRQHandler /* SAI4 global interrupt */
.word DTS_IRQHandler /* Digital Temperature Sensor interrupt */
.word 0 /* Reserved */
.word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */
.word OCTOSPI2_IRQHandler /* OCTOSPI2 Interrupt */
.word OTFDEC1_IRQHandler /* OTFDEC1 Interrupt */
.word OTFDEC2_IRQHandler /* OTFDEC2 Interrupt */
.word FMAC_IRQHandler /* FMAC Interrupt */
.word CORDIC_IRQHandler /* CORDIC Interrupt */
.word UART9_IRQHandler /* UART9 Interrupt */
.word USART10_IRQHandler /* UART10 Interrupt */
.word I2C5_EV_IRQHandler /* I2C5 Event Interrupt */
.word I2C5_ER_IRQHandler /* I2C5 Error Interrupt */
.word FDCAN3_IT0_IRQHandler /* FDCAN3 interrupt line 0 */
.word FDCAN3_IT1_IRQHandler /* FDCAN3 interrupt line 1 */
.word TIM23_IRQHandler /* TIM23 global interrupt */
.word TIM24_IRQHandler /* TIM24 global interrupt */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_AVD_IRQHandler
.thumb_set PVD_AVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak FDCAN1_IT0_IRQHandler
.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
.weak FDCAN2_IT0_IRQHandler
.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
.weak FDCAN1_IT1_IRQHandler
.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
.weak FDCAN2_IT1_IRQHandler
.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak FDCAN_CAL_IRQHandler
.thumb_set FDCAN_CAL_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_PSSI_IRQHandler
.thumb_set DCMI_PSSI_IRQHandler,Default_Handler
.weak CRYP_IRQHandler
.thumb_set CRYP_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak OCTOSPI1_IRQHandler
.thumb_set OCTOSPI1_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DMAMUX1_OVR_IRQHandler
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak MDIOS_WKUP_IRQHandler
.thumb_set MDIOS_WKUP_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak HSEM1_IRQHandler
.thumb_set HSEM1_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak DMAMUX2_OVR_IRQHandler
.thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler
.weak BDMA_Channel0_IRQHandler
.thumb_set BDMA_Channel0_IRQHandler,Default_Handler
.weak BDMA_Channel1_IRQHandler
.thumb_set BDMA_Channel1_IRQHandler,Default_Handler
.weak BDMA_Channel2_IRQHandler
.thumb_set BDMA_Channel2_IRQHandler,Default_Handler
.weak BDMA_Channel3_IRQHandler
.thumb_set BDMA_Channel3_IRQHandler,Default_Handler
.weak BDMA_Channel4_IRQHandler
.thumb_set BDMA_Channel4_IRQHandler,Default_Handler
.weak BDMA_Channel5_IRQHandler
.thumb_set BDMA_Channel5_IRQHandler,Default_Handler
.weak BDMA_Channel6_IRQHandler
.thumb_set BDMA_Channel6_IRQHandler,Default_Handler
.weak BDMA_Channel7_IRQHandler
.thumb_set BDMA_Channel7_IRQHandler,Default_Handler
.weak COMP1_IRQHandler
.thumb_set COMP1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak LPTIM3_IRQHandler
.thumb_set LPTIM3_IRQHandler,Default_Handler
.weak LPTIM4_IRQHandler
.thumb_set LPTIM4_IRQHandler,Default_Handler
.weak LPTIM5_IRQHandler
.thumb_set LPTIM5_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
.weak ECC_IRQHandler
.thumb_set ECC_IRQHandler,Default_Handler
.weak SAI4_IRQHandler
.thumb_set SAI4_IRQHandler,Default_Handler
.weak DTS_IRQHandler
.thumb_set DTS_IRQHandler,Default_Handler
.weak WAKEUP_PIN_IRQHandler
.thumb_set WAKEUP_PIN_IRQHandler,Default_Handler
.weak OCTOSPI2_IRQHandler
.thumb_set OCTOSPI2_IRQHandler,Default_Handler
.weak OTFDEC1_IRQHandler
.thumb_set OTFDEC1_IRQHandler,Default_Handler
.weak OTFDEC2_IRQHandler
.thumb_set OTFDEC2_IRQHandler,Default_Handler
.weak FMAC_IRQHandler
.thumb_set FMAC_IRQHandler,Default_Handler
.weak CORDIC_IRQHandler
.thumb_set CORDIC_IRQHandler,Default_Handler
.weak UART9_IRQHandler
.thumb_set UART9_IRQHandler,Default_Handler
.weak USART10_IRQHandler
.thumb_set USART10_IRQHandler,Default_Handler
.weak I2C5_EV_IRQHandler
.thumb_set I2C5_EV_IRQHandler,Default_Handler
.weak I2C5_ER_IRQHandler
.thumb_set I2C5_ER_IRQHandler,Default_Handler
.weak FDCAN3_IT0_IRQHandler
.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
.weak FDCAN3_IT1_IRQHandler
.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
.weak TIM23_IRQHandler
.thumb_set TIM23_IRQHandler,Default_Handler
.weak TIM24_IRQHandler
.thumb_set TIM24_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -61,6 +61,9 @@ defined in linker script */
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Call the clock system intitialization function.*/
bl SystemInit
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
@ -89,8 +92,6 @@ LoopFillZerobss:
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x30000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x30007FFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x24000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x24000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2401FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x24020000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2404FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

View File

@ -0,0 +1,34 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x0000FFFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

Some files were not shown because too many files have changed in this diff Show More