/********************************** (C) COPYRIGHT *******************************
* File Name          : ch32v10x_pwr.c
* Author             : WCH
* Version            : V1.0.0
* Date               : 2020/04/30
* Description        : This file provides all the PWR firmware functions.
********************************************************************************/
#include "ch32v10x_pwr.h"
#include "ch32v10x_rcc.h"

/* PWR registers bit mask */
/* CTLR register bit mask */
#define CTLR_DS_MASK             ((uint32_t)0xFFFFFFFC)
#define CTLR_PLS_MASK            ((uint32_t)0xFFFFFF1F)

/********************************************************************************
* Function Name  : PWR_DeInit
* Description    : Deinitializes the PWR peripheral registers to their default 
*                  reset values. 
* Input          : None
* Return         : None
*********************************************************************************/	
void PWR_DeInit(void)
{
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
}


/********************************************************************************
* Function Name  : PWR_BackupAccessCmd
* Description    : Enables or disables access to the RTC and backup registers.  
* Input          : NewState: new state of the access to the RTC and backup registers,
*                            This parameter can be: ENABLE or DISABLE. 
* Return         : None
*********************************************************************************/	
void PWR_BackupAccessCmd(FunctionalState NewState)
{
	if(NewState)
	{
		PWR->CTLR |= (1<<8);
	}
	else{
		PWR->CTLR &= ~(1<<8);		
	}
}


/********************************************************************************
* Function Name  : PWR_PVDCmd
* Description    : Enables or disables the Power Voltage Detector(PVD).
* Input          : NewState: new state of the PVD(ENABLE or DISABLE).
* Return         : None
*********************************************************************************/	
void PWR_PVDCmd(FunctionalState NewState)
{
	if(NewState)
	{
		PWR->CTLR |= (1<<4);
	}
	else{
		PWR->CTLR &= ~(1<<4);		
	}
}


/********************************************************************************
* Function Name  : PWR_PVDLevelConfig
* Description    : Configures the voltage threshold detected by the Power Voltage 
*                  Detector(PVD).
* Input          : PWR_PVDLevel: specifies the PVD detection level
*                     PWR_PVDLevel_2V2: PVD detection level set to 2.2V
*                     PWR_PVDLevel_2V3: PVD detection level set to 2.3V
*                     PWR_PVDLevel_2V4: PVD detection level set to 2.4V
*                     PWR_PVDLevel_2V5: PVD detection level set to 2.5V
*                     PWR_PVDLevel_2V6: PVD detection level set to 2.6V
*                     PWR_PVDLevel_2V7: PVD detection level set to 2.7V
*                     PWR_PVDLevel_2V8: PVD detection level set to 2.8V
*                     PWR_PVDLevel_2V9: PVD detection level set to 2.9V
* Return         : None
*********************************************************************************/	
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
{
  uint32_t tmpreg = 0;
  tmpreg = PWR->CTLR;
  tmpreg &= CTLR_PLS_MASK;
  tmpreg |= PWR_PVDLevel;
  PWR->CTLR = tmpreg;
}


/********************************************************************************
* Function Name  : PWR_WakeUpPinCmd
* Description    : Enables or disables the WakeUp Pin functionality.
* Input          : NewState: new state of the WakeUp Pin functionality(ENABLE or DISABLE).
* Return         : None
*********************************************************************************/	
void PWR_WakeUpPinCmd(FunctionalState NewState)
{
	if(NewState)
	{
		PWR->CSR |= (1<<8);
	}
	else{
		PWR->CSR &= ~(1<<8);		
	}
}


/********************************************************************************
* Function Name  : PWR_EnterSTOPMode
* Description    : Enters STOP mode.
* Input          : PWR_Regulator: specifies the regulator state in STOP mode.
*                    PWR_Regulator_ON: STOP mode with regulator ON
*                    PWR_Regulator_LowPower: STOP mode with regulator in low power mode  
*                  PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
*                    PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
*                    PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
* Return         : None
*********************************************************************************/	
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
{
  uint32_t tmpreg = 0;
  tmpreg = PWR->CTLR;
  tmpreg &= CTLR_DS_MASK;
  tmpreg |= PWR_Regulator;
  PWR->CTLR = tmpreg;

  NVIC->SCTLR |= (1<<2);
  
  if(PWR_STOPEntry == PWR_STOPEntry_WFI)
  {   
    __WFI();
  }
  else
  {
    __WFE();
  }

  NVIC->SCTLR &=~ (1<<2);
}

/********************************************************************************
* Function Name  : PWR_EnterSTANDBYMode
* Description    : Enters STANDBY mode.
* Input          : None
* Return         : None
*********************************************************************************/	
void PWR_EnterSTANDBYMode(void)
{
  PWR->CTLR |= PWR_CTLR_CWUF;
  PWR->CTLR |= PWR_CTLR_PDDS;
	NVIC->SCTLR |= (1<<2);

  __WFI();
}


/********************************************************************************
* Function Name  : PWR_GetFlagStatus
* Description    : Checks whether the specified PWR flag is set or not.
* Input          : PWR_FLAG: specifies the flag to check.
*                     PWR_FLAG_WU: Wake Up flag
*                     PWR_FLAG_SB: StandBy flag
*                     PWR_FLAG_PVDO: PVD Output
* Return         : The new state of PWR_FLAG (SET or RESET).
*********************************************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
{
  FlagStatus bitstatus = RESET;
  
  if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  return bitstatus;
}


/********************************************************************************
* Function Name  : PWR_ClearFlag
* Description    : Clears the PWR's pending flags.
* Input          : PWR_FLAG: specifies the flag to clear.
*                     PWR_FLAG_WU: Wake Up flag
*                     PWR_FLAG_SB: StandBy flag
* Return         : None
*********************************************************************************/
void PWR_ClearFlag(uint32_t PWR_FLAG)
{        
  PWR->CTLR |=  PWR_FLAG << 2;
}