Embedded/threadx
1
0
Fork 0
mirror of https://github.com/azure-rtos/threadx synced 2025-01-30 08:02:57 +08:00
Code Issues Releases Wiki Activity
threadx/ports/arm9/gnu/readme_threadx.txt
Yuxin Zhou b12bd44faa Release 6.1.6
2021-04-03 01:03:21 +00:00

500 lines
25 KiB
Plaintext
Raw Blame History

Microsoft's Azure RTOS ThreadX for ARM9
Using the GNU Tools
1. Building the ThreadX run-time Library
First make sure you are in the "example_build" directory. Also, make sure that
you have setup your path and other environment variables necessary for the GNU
development environment.
At this point you may run the build_threadx.bat batch file. This will build the
ThreadX run-time environment in the "example_build" directory.
You should observe assembly and compilation of a series of ThreadX source
files. At the end of the batch file, they are all combined into the
run-time library file: TX.A. This file must be linked with your
application in order to use ThreadX.
2. Demonstration System
Building the demonstration is easy; simply execute the build_threadx_sample.bat
batch file while inside the "example_build" directory.
You should observe the compilation of sample_threadx.c (which is the demonstration
application) and linking with TX.A. The resulting file DEMO is a binary file
that can be downloaded and executed.
3. System Initialization
The entry point in ThreadX for the ARM9 using GNU tools is at label _start.
This is defined within the modified version of the GNU startup code - crt0.S.
The ThreadX tx_initialize_low_level.S file is responsible for setting up various
system data structures, the interrupt vectors, and a periodic timer interrupt source.
By default, the vector area is defined to be located at the "__vectors" label,
which is defined in reset.S. This area is typically located at 0. In situations
where this is impossible, the vectors at the "__vectors" label should be copied
to address 0.
This is also where initialization of a periodic timer interrupt source should take
place.
In addition, _tx_initialize_low_level defines the first available address
for use by the application, which is supplied as the sole input parameter
to your application definition function, tx_application_define.
4. Assembler / Compiler Switches
The following are compiler switches used in building the demonstration
system:
Compiler/Assembler Meaning
Switches
-g Specifies debug information
-c Specifies object code generation
-mcpu=arm9 Specifies target cpu
Linker Switch Meaning
-o sample_threadx.out Specifies output file
-M > sample_threadx.map Specifies demo map file
-A arm9 Specifies target architecture
-T sample_threadx.ld Specifies the loader control file
Application Defines ( -D option)
TX_ENABLE_FIQ_SUPPORT This assembler define enables FIQ
interrupt handling support in the
ThreadX assembly files. If used,
it should be used on all assembly
files and the generic C source of
ThreadX should be compiled with
TX_ENABLE_FIQ_SUPPORT defined as well.
TX_ENABLE_IRQ_NESTING This assembler define enables IRQ
nested support. If IRQ nested
interrupt support is needed, this
define should be applied to
tx_initialize_low_level.S.
TX_ENABLE_FIQ_NESTING This assembler define enables FIQ
nested support. If FIQ nested
interrupt support is needed, this
define should be applied to
tx_initialize_low_level.S. In addition,
IRQ nesting should also be enabled.
TX_ENABLE_FIQ_SUPPORT This compiler define enables FIQ
interrupt handling in the ThreadX
generic C source. This define
should also be used in conjunction
with the corresponding assembler
define.
TX_DISABLE_ERROR_CHECKING If defined before tx_api.h is included,
this define causes basic ThreadX error
checking to be disabled. Please see
Chapter 2 in the "ThreadX User Guide"
for more details.
TX_MAX_PRIORITIES Defines the priority levels for ThreadX.
Legal values range from 32 through
1024 (inclusive) and MUST be evenly divisible
by 32. Increasing the number of priority levels
supported increases the RAM usage by 128 bytes
for every group of 32 priorities. However, there
is only a negligible effect on performance. By
default, this value is set to 32 priority levels.
TX_MINIMUM_STACK Defines the minimum stack size (in bytes). It is
used for error checking when threads are created.
The default value is port-specific and is found
in tx_port.h.
TX_TIMER_THREAD_STACK_SIZE Defines the stack size (in bytes) of the internal
ThreadX timer thread. This thread processes all
thread sleep requests as well as all service call
timeouts. In addition, all application timer callback
routines are invoked from this context. The default
value is port-specific and is found in tx_port.h.
TX_TIMER_THREAD_PRIORITY Defines the priority of the internal ThreadX timer
thread. The default value is priority 0 - the highest
priority in ThreadX. The default value is defined
in tx_port.h.
TX_TIMER_PROCESS_IN_ISR Defined, this option eliminates the internal system
timer thread for ThreadX. This results in improved
performance on timer events and smaller RAM requirements
because the timer stack and control block are no
longer needed. However, using this option moves all
the timer expiration processing to the timer ISR level.
By default, this option is not defined.
TX_REACTIVATE_INLINE Defined, this option performs reactivation of ThreadX
timers in-line instead of using a function call. This
improves performance but slightly increases code size.
By default, this option is not defined.
TX_DISABLE_STACK_FILLING Defined, placing the 0xEF value in each byte of each
thread's stack is disabled. By default, this option is
not defined.
TX_ENABLE_STACK_CHECKING Defined, this option enables ThreadX run-time stack checking,
which includes analysis of how much stack has been used and
examination of data pattern "fences" before and after the
stack area. If a stack error is detected, the registered
application stack error handler is called. This option does
result in slightly increased overhead and code size. Please
review the tx_thread_stack_error_notify API for more information.
By default, this option is not defined.
TX_DISABLE_PREEMPTION_THRESHOLD Defined, this option disables the preemption-threshold feature
and slightly reduces code size and improves performance. Of course,
the preemption-threshold capabilities are no longer available.
By default, this option is not defined.
TX_DISABLE_REDUNDANT_CLEARING Defined, this option removes the logic for initializing ThreadX
global C data structures to zero. This should only be used if
the compiler's initialization code sets all un-initialized
C global data to zero. Using this option slightly reduces
code size and improves performance during initialization.
By default, this option is not defined.
TX_DISABLE_NOTIFY_CALLBACKS Defined, this option disables the notify callbacks for various
ThreadX objects. Using this option slightly reduces code size
and improves performance.
TX_BLOCK_POOL_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on block pools. By default, this option is
not defined.
TX_BYTE_POOL_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on byte pools. By default, this option is
not defined.
TX_EVENT_FLAGS_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on event flags groups. By default, this option
is not defined.
TX_MUTEX_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on mutexes. By default, this option is
not defined.
TX_QUEUE_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on queues. By default, this option is
not defined.
TX_SEMAPHORE_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on semaphores. By default, this option is
not defined.
TX_THREAD_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on threads. By default, this option is
not defined.
TX_TIMER_ENABLE_PERFORMANCE_INFO Defined, this option enables the gathering of performance
information on timers. By default, this option is
not defined.
TX_ENABLE_EVENT_TRACE Defined, this option enables the internal ThreadX trace
feature. The trace buffer is supplied at a later time
via an application call to tx_trace_enable.
TX_TRACE_TIME_SOURCE This defines the time-stamp source for event tracing.
This define is only pertinent if the ThreadX library is
built with TX_ENABLE_EVENT_TRACE defined.
TX_TRACE_TIME_MASK This defines the number of valid bits in the event trace
time-stamp source defined previously. If the time-stamp
source is 16-bits, this value should be 0xFFFF. Alternatively,
if the time-stamp source is 32-bits, this value should be
0xFFFFFFFF. This define is only pertinent if the ThreadX
library is built with TX_ENABLE_EVENT_TRACE defined.
5. Register Usage and Stack Frames
The GNU compiler assumes that registers r0-r3 (a1-a4) and r12 (ip) are scratch
registers for each function. All other registers used by a C function must
be preserved by the function. ThreadX takes advantage of this in situations
where a context switch happens as a result of making a ThreadX service call
(which is itself a C function). In such cases, the saved context of a thread
is only the non-scratch registers.
The following defines the saved context stack frames for context switches
that occur as a result of interrupt handling or from thread-level API calls.
All suspended threads have one of these two types of stack frames. The top
of the suspended thread's stack is pointed to by tx_thread_stack_ptr in the
associated thread control block TX_THREAD.
Offset Interrupted Stack Frame Non-Interrupt Stack Frame
0x00 1 0
0x04 CPSR CPSR
0x08 r0 (a1) r4 (v1)
0x0C r1 (a2) r5 (v2)
0x10 r2 (a3) r6 (v3)
0x14 r3 (a4) r7 (v4)
0x18 r4 (v1) r8 (v5)
0x1C r5 (v2) r9 (v6)
0x20 r6 (v3) r10 (v7)
0x24 r7 (v4) r11 (fp)
0x28 r8 (v5) r14 (lr)
0x2C r9 (v6)
0x30 r10 (v7)
0x34 r11 (fp)
0x38 r12 (ip)
0x3C r14 (lr)
0x40 PC
6. Improving Performance
The distribution version of ThreadX is built without any compiler
optimizations. This makes it easy to debug because you can trace or set
In addition, you can eliminate the ThreadX basic API error checking by
compiling your application code with the symbol TX_DISABLE_ERROR_CHECKING
defined.
7. Interrupt Handling
ThreadX provides complete and high-performance interrupt handling for ARM9
targets. There are a certain set of requirements that are defined in the
following sub-sections:
7.1 Vector Area
The ARM9 vectors start at address zero. The demonstration system startup
reset.S file contains the vectors and is loaded at address zero. On actual
hardware platforms, this area might have to be copied to address 0.
7.2 IRQ ISRs
ThreadX fully manages standard and vectored IRQ interrupts. ThreadX also supports
nested IRQ interrupts. The following sub-sections define the IRQ capabilities.
7.2.1 Standard IRQ ISRs
The standard ARM IRQ mechanism has a single interrupt vector at address 0x18. This IRQ
interrupt is managed by the __tx_irq_handler code in tx_initialize_low_level. The following
is the default IRQ handler defined in tx_initialize_low_level.S:
.global __tx_irq_handler
.global __tx_irq_processing_return
__tx_irq_handler:
@
@ /* Jump to context save to save system context. */
B _tx_thread_context_save @ Jump to the context save
__tx_irq_processing_return:
@
@ /* At this point execution is still in the IRQ mode. The CPSR, point of
@ interrupt, and all C scratch registers are available for use. Note
@ that IRQ interrupts are still disabled upon return from the context
@ save function. */
@
@ /* Application ISR call(s) go here! */
@
@ /* Jump to context restore to restore system context. */
B _tx_thread_context_restore
7.2.2 Vectored IRQ ISRs
The vectored ARM IRQ mechanism has multiple interrupt vectors at addresses specified
by the particular implementation. The following is an example IRQ handler defined in
tx_initialize_low_level.S:
.global __tx_irq_example_handler
__tx_irq_example_handler:
@
@ /* Call context save to save system context. */
STMDB sp!, {r0-r3} @ Save some scratch registers
MRS r0, SPSR @ Pickup saved SPSR
SUB lr, lr, #4 @ Adjust point of interrupt
STMDB sp!, {r0, r10, r12, lr} @ Store other scratch registers
BL _tx_thread_vectored_context_save @ Call the vectored IRQ context save
@
@ /* At this point execution is still in the IRQ mode. The CPSR, point of
@ interrupt, and all C scratch registers are available for use. Note
@ that IRQ interrupts are still disabled upon return from the context
@ save function. */
@
@ /* Application ISR call goes here! */
@
@ /* Jump to context restore to restore system context. */
B _tx_thread_context_restore
7.2.3 Nested IRQ Support
By default, nested IRQ interrupt support is not enabled. To enable nested
IRQ support, the entire library should be built with TX_ENABLE_IRQ_NESTING
defined. With this defined, two new IRQ interrupt management services are
available, namely _tx_thread_irq_nesting_start and _tx_thread_irq_nesting_end.
These function should be called between the IRQ context save and restore
calls.
Execution between the calls to _tx_thread_irq_nesting_start and
_tx_thread_irq_nesting_end is enabled for IRQ nesting. This is achieved
by switching from IRQ mode to SYS mode and enabling IRQ interrupts.
The SYS mode stack is used during the SYS mode operation, which was
setup in tx_initialize_low_level.S. When nested IRQ interrupts are no
longer required, calling the _tx_thread_irq_nesting_end service disables
nesting by disabling IRQ interrupts and switching back to IRQ mode in
preparation for the IRQ context restore service.
The following is an example of enabling IRQ nested interrupts in a standard
IRQ handler:
.global __tx_irq_handler
.global __tx_irq_processing_return
__tx_irq_handler:
@
@ /* Jump to context save to save system context. */
B _tx_thread_context_save
__tx_irq_processing_return:
@
@ /* Enable nested IRQ interrupts. NOTE: Since this service returns
@ with IRQ interrupts enabled, all IRQ interrupt sources must be
@ cleared prior to calling this service. */
BL _tx_thread_irq_nesting_start
@
@ /* Application ISR call(s) go here! */
@
@ /* Disable nested IRQ interrupts. The mode is switched back to
@ IRQ mode and IRQ interrupts are disable upon return. */
BL _tx_thread_irq_nesting_end
@
@ /* Jump to context restore to restore system context. */
B _tx_thread_context_restore
7.3 FIQ Interrupts
By default, ARM7 FIQ interrupts are left alone by ThreadX. Of course, this
means that the application is fully responsible for enabling the FIQ interrupt
and saving/restoring any registers used in the FIQ ISR processing. To globally
enable FIQ interrupts, the application should enable FIQ interrupts at the
beginning of each thread or before any threads are created in tx_application_define.
In addition, the application must ensure that no ThreadX service calls are made
from default FIQ ISRs, which is located in tx_initialize_low_level.S.
7.3.1 Managed FIQ Interrupts
Full ThreadX management of FIQ interrupts is provided if the ThreadX sources
are built with the TX_ENABLE_FIQ_SUPPORT defined. If the library is built
this way, the FIQ interrupt handlers are very similar to the IRQ interrupt
handlers defined previously. The following is default FIQ handler
defined in tx_initialize_low_level.S:
.global __tx_fiq_handler
.global __tx_fiq_processing_return
__tx_fiq_handler:
@
@ /* Jump to fiq context save to save system context. */
B _tx_thread_fiq_context_save
__tx_fiq_processing_return:
@
@ /* At this point execution is still in the FIQ mode. The CPSR, point of
@ interrupt, and all C scratch registers are available for use. */
@
@ /* Application FIQ handlers can be called here! */
@
@ /* Jump to fiq context restore to restore system context. */
B _tx_thread_fiq_context_restore
7.3.1.1 Nested FIQ Support
By default, nested FIQ interrupt support is not enabled. To enable nested
FIQ support, the entire library should be built with TX_ENABLE_FIQ_NESTING
defined. With this defined, two new FIQ interrupt management services are
available, namely _tx_thread_fiq_nesting_start and _tx_thread_fiq_nesting_end.
These function should be called between the FIQ context save and restore
calls.
Execution between the calls to _tx_thread_fiq_nesting_start and
_tx_thread_fiq_nesting_end is enabled for FIQ nesting. This is achieved
by switching from FIQ mode to SYS mode and enabling FIQ interrupts.
The SYS mode stack is used during the SYS mode operation, which was
setup in tx_initialize_low_level.S. When nested FIQ interrupts are no longer required,
calling the _tx_thread_fiq_nesting_end service disables nesting by disabling
FIQ interrupts and switching back to FIQ mode in preparation for the FIQ
context restore service.
The following is an example of enabling FIQ nested interrupts in the
typical FIQ handler:
.global __tx_fiq_handler
.global __tx_fiq_processing_return
__tx_fiq_handler:
@
@ /* Jump to fiq context save to save system context. */
B _tx_thread_fiq_context_save
__tx_fiq_processing_return:
@
@ /* At this point execution is still in the FIQ mode. The CPSR, point of
@ interrupt, and all C scratch registers are available for use. */
@
@ /* Enable nested FIQ interrupts. NOTE: Since this service returns
@ with FIQ interrupts enabled, all FIQ interrupt sources must be
@ cleared prior to calling this service. */
BL _tx_thread_fiq_nesting_start
@
@ /* Application FIQ handlers can be called here! */
@
@ /* Disable nested FIQ interrupts. The mode is switched back to
@ FIQ mode and FIQ interrupts are disable upon return. */
BL _tx_thread_fiq_nesting_end
@
@ /* Jump to fiq context restore to restore system context. */
B _tx_thread_fiq_context_restore
8. ThreadX Timer Interrupt
ThreadX requires a periodic interrupt source to manage all time-slicing,
thread sleeps, timeouts, and application timers. Without such a timer
interrupt source, these services are not functional but the remainder of
ThreadX will still run.
To add the timer interrupt processing, simply make a call to
_tx_timer_interrupt in the IRQ processing. An example of this can be
found in the file tx_initialize_low_level.S for the demonstration system.
9. Revision History
For generic code revision information, please refer to the readme_threadx_generic.txt
file, which is included in your distribution. The following details the revision
information associated with this specific port of ThreadX:
04-02-2021 Release 6.1.6 changes:
tx_port.h Updated macro definition
09-30-2020 Initial ThreadX 6.1 version for ARM9 using GNU tools.
Copyright(c) 1996-2020 Microsoft Corporation
https://azure.com/rtos
Reference in New Issue View Git Blame Copy Permalink