tinyusb/tinyusb/portable/nordic/nrf5x/hal_nrf5x.c

/**************************************************************************/
/*!
    @file     hal_nrf5x.c
    @author   hathach

    @section LICENSE

    Software License Agreement (BSD License)

    Copyright (c) 2018, hathach (tinyusb.org)
    All rights reserved.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions are met:
    1. Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
    3. Neither the name of the copyright holders nor the
    names of its contributors may be used to endorse or promote products
    derived from this software without specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************/

#include "tusb_option.h"

#if MODE_DEVICE_SUPPORTED && CFG_TUSB_MCU == OPT_MCU_NRF5X

#include <stdbool.h>
#include "nrf.h"
#include "nrf_gpio.h"
#include "nrf_clock.h"
#include "nrf_usbd.h"
#include "nrf_drv_usbd_errata.h"

#ifdef SOFTDEVICE_PRESENT
#include "nrf_sdm.h"
#include "nrf_soc.h"
#else
#include "nrf_drv_power.h"
#endif

#include "tusb_hal.h"

/*------------------------------------------------------------------*/
/* MACRO TYPEDEF CONSTANT ENUM
 *------------------------------------------------------------------*/

#define USB_NVIC_PRIO   7

/*------------------------------------------------------------------*/
/* FUNCTION DECLARATION
 *------------------------------------------------------------------*/
void power_usb_event_handler(uint32_t event);

// check if SD is present and enabled
static bool is_sd_enabled(void)
{
  uint8_t sd_en = false;

#ifdef SOFTDEVICE_PRESENT
  (void) sd_softdevice_is_enabled(&sd_en);
#endif

  return sd_en;
}


bool tusb_hal_init(void)
{
#ifdef SOFTDEVICE_PRESENT
  if ( is_sd_enabled() )
  {
    sd_power_usbdetected_enable(true);
    sd_power_usbpwrrdy_enable(true);
    sd_power_usbremoved_enable(true);

    // USB power may already be ready at this time -> no event generated
    // We need to execute the hanlder based on the status
    uint32_t usb_reg;
    sd_power_usbregstatus_get(&usb_reg);

    if (usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk )
    {
      power_usb_event_handler(NRF_EVT_POWER_USB_DETECTED);
    }

    if (usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk )
    {
      power_usb_event_handler(NRF_EVT_POWER_USB_POWER_READY);
    }

    // power_usb_event_handler must be called by SOC event hanlder
    return true;
  }else
#endif
  {
#if 0
    // USB Power detection
    const nrf_drv_power_usbevt_config_t config =
    {
        .handler = (nrf_drv_power_usb_event_handler_t) power_usb_event_handler
    };
    return ( NRF_SUCCESS == nrf_drv_power_usbevt_init(&config) );
#else
    return true;
#endif
  }
}

void tusb_hal_int_enable(uint8_t rhport)
{
  (void) rhport;
  NVIC_EnableIRQ(USBD_IRQn);
}

void tusb_hal_int_disable(uint8_t rhport)
{
  (void) rhport;
  NVIC_DisableIRQ(USBD_IRQn);
}


/*------------------------------------------------------------------*/
/* HFCLK helper
 *------------------------------------------------------------------*/
static bool hfclk_running(void)
{
#ifdef SOFTDEVICE_PRESENT
  if ( is_sd_enabled() )
  {
    uint32_t is_running;
    (void) sd_clock_hfclk_is_running(&is_running);
    return (is_running ? true : false);
  }
#endif

  return nrf_clock_hf_is_running(NRF_CLOCK_HFCLK_HIGH_ACCURACY);
}

static void hfclk_enable(void)
{
  // already running, nothing to do
  if ( hfclk_running() ) return;

#ifdef SOFTDEVICE_PRESENT
  if ( is_sd_enabled() )
  {
    (void)sd_clock_hfclk_request();
    return;
  }
#endif

  nrf_clock_event_clear(NRF_CLOCK_EVENT_HFCLKSTARTED);
  nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTART);
}

static void hfclk_disable(void)
{
#ifdef SOFTDEVICE_PRESENT
  if ( is_sd_enabled() )
  {
    (void)sd_clock_hfclk_release();
    return;
  }
#endif

  nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTOP);
}

/*------------------------------------------------------------------*/
/* Controller Start up Sequence (USBD 51.4 specs)
 *------------------------------------------------------------------*/
void power_usb_event_handler(uint32_t event)
{
  uint32_t POWER_DETECT, POWER_READY, POWER_REMOVE;

#ifdef SOFTDEVICE_PRESENT
  if ( is_sd_enabled() )
  {
    POWER_DETECT = NRF_EVT_POWER_USB_DETECTED;
    POWER_READY  = NRF_EVT_POWER_USB_POWER_READY;
    POWER_REMOVE = NRF_EVT_POWER_USB_REMOVED;
  }else
#endif
  {
    #if 0
    POWER_DETECT = NRF_DRV_POWER_USB_EVT_DETECTED;
    POWER_READY  = NRF_DRV_POWER_USB_EVT_READY;
    POWER_REMOVE = NRF_DRV_POWER_USB_EVT_REMOVED;
    #endif
  }

  if ( POWER_DETECT == event )
  {
    if ( !NRF_USBD->ENABLE )
    {
      /* Prepare for READY event receiving */
      nrf_usbd_eventcause_clear(NRF_USBD_EVENTCAUSE_READY_MASK);

      /* Enable the peripheral */
      // ERRATA 171, 187

      if (nrf_drv_usbd_errata_187())
      {
//          CRITICAL_REGION_ENTER();
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
        }
//          CRITICAL_REGION_EXIT();
      }

      if (nrf_drv_usbd_errata_171())
      {
//          CRITICAL_REGION_ENTER();
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
        }
//          CRITICAL_REGION_EXIT();
      }

      nrf_usbd_enable();

      // Enable HFCLK
      hfclk_enable();
    }
  }
  else if ( POWER_READY == event )
{
    /* Waiting for USBD peripheral enabled */
    while ( !(NRF_USBD_EVENTCAUSE_READY_MASK & NRF_USBD->EVENTCAUSE) ) { }
    nrf_usbd_eventcause_clear(NRF_USBD_EVENTCAUSE_READY_MASK);
    nrf_usbd_event_clear(NRF_USBD_EVENT_USBEVENT);

    if (nrf_drv_usbd_errata_171())
    {
//          CRITICAL_REGION_ENTER();
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
            *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
            *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
            *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
            *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
        }

//          CRITICAL_REGION_EXIT();
    }

    if (nrf_drv_usbd_errata_187())
    {
//          CRITICAL_REGION_ENTER();
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
            *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
            *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
            *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
            *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
        }
//          CRITICAL_REGION_EXIT();
    }

    if ( nrf_drv_usbd_errata_166() )
    {
      *((volatile uint32_t *) (NRF_USBD_BASE + 0x800)) = 0x7E3;
      *((volatile uint32_t *) (NRF_USBD_BASE + 0x804)) = 0x40;

      __ISB(); __DSB();
    }

    nrf_usbd_isosplit_set(NRF_USBD_ISOSPLIT_Half);

    // Enable interrupt. SOF is used as CDC auto flush
    NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_ACCESSFAULT_Msk |
                         USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk |  USBD_INTEN_ENDEPOUT0_Msk |
                         USBD_INTEN_EPDATA_Msk   | USBD_INTEN_SOF_Msk;

    // FIXME Errata 104: USB complete event is not generated (happedn randomly).
    // Requires to enable SOF to perform clean up task.
    // nrf_drv_usbd_errata_104()

    // Enable interrupt, Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice
    NVIC_SetPriority(USBD_IRQn, USB_NVIC_PRIO);
    NVIC_ClearPendingIRQ(USBD_IRQn);
    NVIC_EnableIRQ(USBD_IRQn);

    // Wait for HFCLK
    while ( !hfclk_running() ) {}

    // Enable pull up
    nrf_usbd_pullup_enable();
  }
  else if (POWER_REMOVE == event )
  {
    if ( NRF_USBD->ENABLE )
    {
      // Abort all transfers

      // Disable pull up
      nrf_usbd_pullup_disable();

      // Disable Interrupt
      NVIC_DisableIRQ(USBD_IRQn);

      // disable all interrupt
      NRF_USBD->INTENCLR = NRF_USBD->INTEN;

      nrf_usbd_disable();
      hfclk_disable();
    }
  }
  else
  {
  }
}

#endif