tinyusb/examples/device/uac2_headset/src/tusb_config.h

/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2020 Ha Thach (tinyusb.org)
 * Copyright (c) 2020 Jerzy Kasenberg
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 */

#ifndef _TUSB_CONFIG_H_
#define _TUSB_CONFIG_H_

#ifdef __cplusplus
extern "C" {
#endif

//--------------------------------------------------------------------
// COMMON CONFIGURATION
//--------------------------------------------------------------------

#include "usb_descriptors.h"

// defined by compiler flags for flexibility
#ifndef CFG_TUSB_MCU
#error CFG_TUSB_MCU must be defined
#endif

#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
#else
#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
#endif

#ifndef CFG_TUSB_OS
#define CFG_TUSB_OS                 OPT_OS_NONE
#endif

#ifndef CFG_TUSB_DEBUG
// Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp>
// Keep in mind that enabling logs when data is streaming can disrupt data flow.
// It can be very helpful though when audio unit requests are tested/debugged.
#define CFG_TUSB_DEBUG              0
#endif

/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
 * Tinyusb use follows macros to declare transferring memory so that they can be put
 * into those specific section.
 * e.g
 * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
 * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
 */
#ifndef CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION
#endif

#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
#endif

//--------------------------------------------------------------------
// DEVICE CONFIGURATION
//--------------------------------------------------------------------

#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE    64
#endif

//------------- CLASS -------------//
#define CFG_TUD_CDC               0
#define CFG_TUD_MSC               0
#define CFG_TUD_HID               0
#define CFG_TUD_MIDI              0
#define CFG_TUD_AUDIO             1
#define CFG_TUD_VENDOR            0

//--------------------------------------------------------------------
// AUDIO CLASS DRIVER CONFIGURATION
//--------------------------------------------------------------------
#define CFG_TUD_AUDIO_IN_PATH                     (CFG_TUD_AUDIO)
#define CFG_TUD_AUDIO_OUT_PATH                    (CFG_TUD_AUDIO)

//#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                       220       // This equals TUD_AUDIO_HEADSET_STEREO_DESC_LEN, however, including it from usb_descriptors.h is not possible due to some strange include hassle
#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                       TUD_AUDIO_HEADSET_STEREO_DESC_LEN

// Audio format type I specifications
#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                  1
#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX          2
#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX                  2
#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX          2
#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP                    0

// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense)
#define CFG_TUD_AUDIO_ENABLE_EP_IN                1
#define CFG_TUD_AUDIO_EP_SZ_IN                    (CFG_TUD_AUDIO_IN_PATH * (48 + 1) * (CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX) * (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)) // 48 Samples (48 kHz) x 2 Bytes/Sample x n Channels
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ      CFG_TUD_AUDIO_EP_SZ_IN
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX         CFG_TUD_AUDIO_EP_SZ_IN                  // Maximum EP IN size for all AS alternate settings used

// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense)
#define CFG_TUD_AUDIO_ENABLE_EP_OUT               1
#define CFG_TUD_AUDIO_EP_OUT_SZ                   (CFG_TUD_AUDIO_OUT_PATH * ((48 + CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP) * (CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX) * (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX))) // N Samples (N kHz) x 2 Bytes/Sample x n Channels
#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ     CFG_TUD_AUDIO_EP_OUT_SZ*3
#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX        CFG_TUD_AUDIO_EP_OUT_SZ                 // Maximum EP IN size for all AS alternate settings used

// Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes)
#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 	          1

// Size of control request buffer
#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ	64

#ifdef __cplusplus
}
#endif

#endif /* _TUSB_CONFIG_H_ */