tinyusb/hw/bsp/rp2040/family.mk

DEPS_SUBMODULES = hw/mcu/raspberrypi/pico-sdk

ifeq ($(DEBUG), 1)
CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug
endif

$(BUILD):
	cmake -S . -B $(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) -DPICO_BUILD_DOCS=0 $(CMAKE_DEFSYM)

all: $(BUILD)
	$(MAKE) -C $(BUILD)

clean:
	$(RM) -rf $(BUILD)

#flash: flash-pyocd
flash:
	@$(CP) $(BUILD)/$(PROJECT).uf2 /media/$(USER)/RPI-RP2

JLINK_DEVICE = rp2040_m0_0
PYOCD_TARGET = rp2040
rename FAMILY_SUBMODULES to DEPS_SUBMODULES 2021-03-04 22:53:02 +07:00			`DEPS_SUBMODULES = hw/mcu/raspberrypi/pico-sdk`
update pico-sdk to more recent commit - move target_link_libraries() to family.cmake - enable pico_bootsel_via_double_reset 2021-03-02 22:57:33 +07:00
move esp32s2 and rp2040 target rule to its family.mk 2021-03-17 17:09:25 +07:00			`ifeq ($(DEBUG), 1)`
			`CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug`
			`endif`

			`$(BUILD):`
			`cmake -S . -B $(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) -DPICO_BUILD_DOCS=0 $(CMAKE_DEFSYM)`

			`all: $(BUILD)`
			`$(MAKE) -C $(BUILD)`

			`clean:`
			`$(RM) -rf $(BUILD)`

			`#flash: flash-pyocd`
			`flash:`
			`@$(CP) $(BUILD)/$(PROJECT).uf2 /media/$(USER)/RPI-RP2`

update pico-sdk to more recent commit - move target_link_libraries() to family.cmake - enable pico_bootsel_via_double_reset 2021-03-02 22:57:33 +07:00			`JLINK_DEVICE = rp2040_m0_0`
fix enum walkaround forever check for SE0 when pull up is disabled 2021-03-04 18:36:18 +07:00			`PYOCD_TARGET = rp2040`