Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
tinyusb/hw/bsp/nrf/family.mk

49 lines
1.3 KiB
Makefile
Raw Normal View History

add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
UF2_FAMILY_ID = 0xADA52840
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/nordic/nrfx
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
include $(TOP)/$(BOARD_PATH)/board.mk
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
CFLAGS += \
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
-DCFG_TUSB_MCU=OPT_MCU_NRF5X \
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
-DCONFIG_GPIO_AS_PINRESET
enable -Wcast-align suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
# suppress warning caused by vendor mcu driver
fix -Wcast-qual
2021-10-15 17:35:05 +07:00
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
# All source paths should be relative to the top level.
group more nrf boards
2020-11-28 00:45:44 +07:00
LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
SRC_C += \
spaces
2021-03-17 21:36:52 +07:00
src/portable/nordic/nrf5x/dcd_nrf5x.c \
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
add uart for feather nrf52840
2020-03-08 13:25:14 +07:00
hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
hw/mcu/nordic/nrfx/mdk/system_$(MCU_VARIANT).c
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
INC += \
grouping nrf boards
2020-11-28 00:16:28 +07:00
$(TOP)/$(BOARD_PATH) \
remove lib/CMSIS_4 submodule, move nrf to lib/CMSIS_5
2021-03-02 01:18:05 +07:00
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
$(TOP)/hw/mcu/nordic \
$(TOP)/hw/mcu/nordic/nrfx \
$(TOP)/hw/mcu/nordic/nrfx/mdk \
$(TOP)/hw/mcu/nordic/nrfx/hal \
$(TOP)/hw/mcu/nordic/nrfx/drivers/include \
$(TOP)/hw/mcu/nordic/nrfx/drivers/src \
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
ASFLAGS += -D__HEAP_SIZE=0
# For freeRTOS port source
rework make freertos port handling this allows ports to specify a freertos port outside the FreeRTOS-Kernel lib directory, which would otherwise not be possible Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-03-09 12:14:55 +00:00
FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F
add hid_test.py for testing #58 add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
# For flash-jlink target
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
JLINK_DEVICE = $(MCU_VARIANT)_xxaa
Reference in New Issue Copy Permalink