tinyusb/hw/bsp/stm32f4/family.mk

44 lines
1.2 KiB
Makefile
Raw Normal View History

UF2_FAMILY_ID = 0x57755a57
2021-03-03 20:25:44 +07:00
ST_FAMILY = f4
2021-03-05 22:24:03 +07:00
DEPS_SUBMODULES = lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
2021-03-03 20:25:44 +07:00
ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
2020-11-29 22:48:21 +07:00
include $(TOP)/$(BOARD_PATH)/board.mk
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
-nostdlib -nostartfiles \
-DCFG_TUSB_MCU=OPT_MCU_STM32F4
# suppress warning caused by vendor mcu driver
CFLAGS += -Wno-error=cast-align
SRC_C += \
src/portable/st/synopsys/dcd_synopsys.c \
2020-10-30 12:15:04 +07:00
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
INC += \
2020-11-29 22:48:21 +07:00
$(TOP)/$(BOARD_PATH) \
2020-10-30 14:14:28 +07:00
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
$(TOP)/$(ST_CMSIS)/Include \
2021-03-01 00:39:48 +07:00
$(TOP)/$(ST_HAL_DRIVER)/Inc
# For freeRTOS port source
FREERTOS_PORT = ARM_CM4F
# flash target using on-board stlink
2020-01-10 15:09:59 +07:00
flash: flash-stlink