Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

update h743eval with rhport=1 highspeed

Browse Source
This commit is contained in:
hathach 2020-05-26 22:11:26 +07:00
parent 947c3eb10d
commit 0482f0d686
4 changed files with 89 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
hw/bsp/stm32h743eval/board.mk
View File

@ -8,11 +8,8 @@ CFLAGS += \
-nostdlib -nostartfiles \
-DSTM32H743xx \
-DCFG_TUSB_MCU=OPT_MCU_STM32H7 \
# Board specific for using usb ports
CFLAGS += \
-DCFG_BOARD_DEVICE_RHPORT_NUM=1 \
-DCFG_BOARD_DEVICE_RHPORT_HIGHSPEED
-DBOARD_DEVICE_RHPORT_NUM=1 \
-DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED
# suppress warning caused by vendor mcu driver
CFLAGS += -Wno-error=maybe-uninitialized

97
hw/bsp/stm32h743eval/stm32h743eval.c
View File

@ -32,11 +32,22 @@
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
// Despite being call USB2_OTG
// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port
void OTG_FS_IRQHandler(void)
{
tud_int_handler(0);
}
// Despite being call USB2_OTG
// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port
void OTG_HS_IRQHandler(void)
{
tud_int_handler(1);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
@ -53,7 +64,7 @@ void OTG_FS_IRQHandler(void)
// enable all LED, Button, Uart, USB clock
static void all_rcc_clk_enable(void)
{
__HAL_RCC_GPIOA_CLK_ENABLE(); // LED, USB D+, D-
__HAL_RCC_GPIOA_CLK_ENABLE(); // LED
__HAL_RCC_GPIOC_CLK_ENABLE(); // Button
// __HAL_RCC_GPIOD_CLK_ENABLE(); // Uart tx, rx
// __HAL_RCC_USART3_CLK_ENABLE(); // Uart module
@ -187,17 +198,13 @@ void board_init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
// USB1 HS (ULPI Phy), internal FS PHY
// PB12 ID, PB13 VBUS, PB14 DM, PB15 DP
#endif
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
// USB2 FS Pin Init
#if BOARD_DEVICE_RHPORT_NUM == 0
// Despite being call USB2_OTG
// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port
// PA9 VUSB, PA10 ID, PA11 DM, PA12 DP
__HAL_RCC_GPIOA_CLK_ENABLE();
/* Configure DM DP Pins */
GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@ -228,6 +235,76 @@ void board_init(void)
// Enable VBUS sense (B device) via pin PA9
USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
#endif
#if BOARD_DEVICE_RHPORT_NUM == 1
// Despite being call USB2_OTG
// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOC_CLK_ENABLE();
__GPIOH_CLK_ENABLE();
__GPIOI_CLK_ENABLE();
/* CLK */
GPIO_InitStruct.Pin = GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* D0 */
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* D1 D2 D3 D4 D5 D6 D7 */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* STP */
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* NXT */
GPIO_InitStruct.Pin = GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/* DIR */
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
__HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE();
/* Enable USB HS Clocks */
__HAL_RCC_USB1_OTG_HS_CLK_ENABLE();
// No VBUS sense
USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
// Force device mode
// USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD;
// USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
// B-peripheral session valid override enabl
// USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
// USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
#endif // rhport = 1
}
//--------------------------------------------------------------------+

4
src/tusb_option.h
View File

@ -138,10 +138,6 @@
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE
#endif
//#ifndef CFG_TUSB_RHPORT1_MODE
// #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE
//#endif
#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST ) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ) || \
((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) )
#error "TinyUSB currently does not support same modes on more than 1 roothub port"

5
test/test/support/tusb_config.h
View File

@ -43,12 +43,7 @@
#define CFG_TUSB_MCU OPT_MCU_NRF5X
#endif
#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
#else
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE
#endif
#define CFG_TUSB_OS OPT_OS_NONE
// CFG_TUSB_DEBUG is defined by compiler in DEBUG build