add lpc18 family

hw/bsp/lpc18/boards/mcb1800/board.h

@@ -0,0 +1,52 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// PD_10
+#define LED_PORT      6
+#define LED_PIN       24
+
+// P4_0
+#define BUTTON_PORT   2
+#define BUTTON_PIN    0
+
+#define UART_DEV        LPC_USART3
+#define UART_PORT       0x02
+#define UART_PIN_TX     3
+#define UART_PIN_RX     4
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif

hw/bsp/lpc18/boards/mcb1800/board.mk

@@ -0,0 +1,4 @@
+LD_FILE = $(BOARD_PATH)/lpc1857.ld
+
+# For flash-jlink target
+JLINK_DEVICE = LPC1857

hw/bsp/lpc18/family.c

@@ -25,7 +25,8 @@
  */
 
 #include "chip.h"
-#include "../board.h"
+#include "bsp/board.h"
+#include "board.h"
 
 //--------------------------------------------------------------------+
 // USB Interrupt Handler
@@ -56,19 +57,6 @@ void USB1_IRQHandler(void)
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
 
-// PD_10
-#define LED_PORT      6
-#define LED_PIN       24
-
-// P4_0
-#define BUTTON_PORT   2
-#define BUTTON_PIN    0
-
-#define UART_DEV        LPC_USART3
-#define UART_PORT       0x02
-#define UART_PIN_TX     3
-#define UART_PIN_RX     4
-
 
 /* System configuration variables used by chip driver */
 const uint32_t OscRateIn = 12000000;

hw/bsp/lpc18/family.mk

@@ -1,3 +1,7 @@
+FAMILY_SUBMODULES = hw/mcu/nxp
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
 CFLAGS += \
   -flto \
   -mthumb \
@@ -13,9 +17,6 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes
 
 MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx
 
-# All source paths should be relative to the top level.
-LD_FILE = hw/bsp/$(BOARD)/lpc1857.ld
-
 SRC_C += \
 	$(MCU_DIR)/../gcc/cr_startup_lpc18xx.c \
 	$(MCU_DIR)/src/chip_18xx_43xx.c \
@@ -25,6 +26,7 @@ SRC_C += \
 	$(MCU_DIR)/src/uart_18xx_43xx.c
 
 INC += \
+	$(TOP)/$(BOARD_PATH) \
 	$(TOP)/$(MCU_DIR)/inc \
 	$(TOP)/$(MCU_DIR)/inc/config_18xx
 
@@ -35,8 +37,5 @@ CHIP_FAMILY = transdimension
 # For freeRTOS port source
 FREERTOS_PORT = ARM_CM3
 
-# For flash-jlink target
-JLINK_DEVICE = LPC1857
-
 # flash using jlink
 flash: flash-jlink