From 0e06c4cfdf1cb57f1c71fd3de022eda9310f6f35 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Apr 2024 00:03:13 +0700 Subject: [PATCH] clang u5, also bump up cmsis u5 version --- .../stm32u5/boards/stm32u575eval/board.cmake | 2 - .../boards/stm32u575nucleo/board.cmake | 2 - .../stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld | 12 +- hw/bsp/stm32u5/family.cmake | 16 +- hw/bsp/stm32u5/linker/STM32U535xx_FLASH.ld | 167 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U545xx_FLASH.ld | 167 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U575xx_FLASH.ld | 185 ++++++++++++++++++ hw/bsp/stm32u5/linker/STM32U585xx_FLASH.ld | 185 ++++++++++++++++++ hw/bsp/stm32u5/linker/STM32U595xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U599xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U5F7xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U5F9xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U5G7xx_FLASH.ld | 168 ++++++++++++++++ hw/bsp/stm32u5/linker/STM32U5G9xx_FLASH.ld | 168 ++++++++++++++++ tools/get_deps.py | 2 +- 16 files changed, 1898 insertions(+), 16 deletions(-) create mode 100644 hw/bsp/stm32u5/linker/STM32U535xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U545xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U575xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U585xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U595xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U599xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U5F7xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U5F9xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U5G7xx_FLASH.ld create mode 100644 hw/bsp/stm32u5/linker/STM32U5G9xx_FLASH.ld diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.cmake b/hw/bsp/stm32u5/boards/stm32u575eval/board.cmake index 57ba85c71..dc2f42d94 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.cmake +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.cmake @@ -1,8 +1,6 @@ set(MCU_VARIANT stm32u575xx) set(JLINK_DEVICE stm32u575ai) -set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld) - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32U575xx diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake index 73bd10033..76285c08f 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.cmake @@ -1,8 +1,6 @@ set(MCU_VARIANT stm32u575xx) set(JLINK_DEVICE stm32u575zi) -set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld) - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32U575xx diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld index 8aa68a6a6..2d1028cbe 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld @@ -35,12 +35,6 @@ /* Entry Point */ ENTRY(Reset_Handler) -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - /* Memories definition */ MEMORY { @@ -49,6 +43,12 @@ MEMORY FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K } +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + /* Sections */ SECTIONS { diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index cde1df5ca..d3cb78abf 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(ST_FAMILY u5) set(ST_PREFIX stm32${ST_FAMILY}xx) @@ -29,7 +25,14 @@ function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) # Startup & Linker script set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) add_library(${BOARD_TARGET} STATIC @@ -57,9 +60,12 @@ function(add_board_target BOARD_TARGET) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles - # nanolib --specs=nosys.specs --specs=nano.specs ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}" diff --git a/hw/bsp/stm32u5/linker/STM32U535xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U535xx_FLASH.ld new file mode 100644 index 000000000..6ac1479a3 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U535xx_FLASH.ld @@ -0,0 +1,167 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U535xE Device from STM32U5 series +** 512Kbytes FLASH +** 272Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U545xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U545xx_FLASH.ld new file mode 100644 index 000000000..ce370c643 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U545xx_FLASH.ld @@ -0,0 +1,167 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U545xE Device from STM32U5 series +** 512Kbytes FLASH +** 272Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U575xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U575xx_FLASH.ld new file mode 100644 index 000000000..b24c533de --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U575xx_FLASH.ld @@ -0,0 +1,185 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for STM32U575xx Device from STM32U5 series +** 2048Kbytes ROM +** 784Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2021 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "ROM" Rom type memory */ + .isr_vector : + { + . = ALIGN(8); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(8); + } >ROM + + /* The program code and other data into "ROM" Rom type memory */ + .text : + { + . = ALIGN(8); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(8); + _etext = .; /* define a global symbols at end of code */ + } >ROM + + /* Constant data into "ROM" Rom type memory */ + .rodata : + { + . = ALIGN(8); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(8); + } >ROM + + .ARM.extab : { + . = ALIGN(8); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(8); + } >ROM + + .ARM : { + . = ALIGN(8); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(8); + } >ROM + + .preinit_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(8); + } >ROM + + .init_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(8); + } >ROM + + .fini_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(8); + } >ROM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(8); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(8); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> ROM + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(8); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(8); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U585xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U585xx_FLASH.ld new file mode 100644 index 000000000..15b8054bc --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U585xx_FLASH.ld @@ -0,0 +1,185 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for STM32U585xx Device from STM32U5 series +** 2048Kbytes ROM +** 784Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2021 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "ROM" Rom type memory */ + .isr_vector : + { + . = ALIGN(8); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(8); + } >ROM + + /* The program code and other data into "ROM" Rom type memory */ + .text : + { + . = ALIGN(8); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(8); + _etext = .; /* define a global symbols at end of code */ + } >ROM + + /* Constant data into "ROM" Rom type memory */ + .rodata : + { + . = ALIGN(8); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(8); + } >ROM + + .ARM.extab : { + . = ALIGN(8); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(8); + } >ROM + + .ARM : { + . = ALIGN(8); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(8); + } >ROM + + .preinit_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(8); + } >ROM + + .init_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(8); + } >ROM + + .fini_array : + { + . = ALIGN(8); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(8); + } >ROM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(8); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(8); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> ROM + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(8); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(8); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U595xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U595xx_FLASH.ld new file mode 100644 index 000000000..100ee14a5 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U595xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U595xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2021 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U599xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U599xx_FLASH.ld new file mode 100644 index 000000000..55997bf40 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U599xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U599xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2021 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld new file mode 100644 index 000000000..a5f7d3405 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5A9xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2021 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U5F7xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U5F7xx_FLASH.ld new file mode 100644 index 000000000..bb9953440 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U5F7xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5F7xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2023 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U5F9xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U5F9xx_FLASH.ld new file mode 100644 index 000000000..d8f1f4c5f --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U5F9xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5F9xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2023 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U5G7xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U5G7xx_FLASH.ld new file mode 100644 index 000000000..d02d6ebf1 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U5G7xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5G7xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2023 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/linker/STM32U5G9xx_FLASH.ld b/hw/bsp/stm32u5/linker/STM32U5G9xx_FLASH.ld new file mode 100644 index 000000000..1b072fdd4 --- /dev/null +++ b/hw/bsp/stm32u5/linker/STM32U5G9xx_FLASH.ld @@ -0,0 +1,168 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U5G9xJ Device from STM32U5 series +** 4096Kbytes FLASH +** 2528Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© Copyright (c) 2023 STMicroelectronics. +** All rights reserved.

+** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4096K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/tools/get_deps.py b/tools/get_deps.py index 70c161132..bf6ef8c00 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -111,7 +111,7 @@ deps_optional = { 'd922865fc0326a102c26211c44b8e42f52c1e53d', 'stm32l5'], 'hw/mcu/st/cmsis_device_u5': ['https://github.com/STMicroelectronics/cmsis_device_u5.git', - '06d7edade7167b0eafdd550bf77cfc4fa98eae2e', + '5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309', 'stm32u5'], 'hw/mcu/st/cmsis_device_wb': ['https://github.com/STMicroelectronics/cmsis_device_wb.git', '9c5d1920dd9fabbe2548e10561d63db829bb744f',