mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-17 05:32:55 +08:00
moving lpc11u6x
This commit is contained in:
hathach
parent
5fc6819ddb
commit
192a95a96e
@ -10,19 +10,22 @@ CFLAGS += \
|
|||||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \
|
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \
|
||||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||||
|
|
||||||
|
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc11u6x
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
# All source paths should be relative to the top level.
|
||||||
LD_FILE = hw/bsp/lpcxpresso11u68/lpc11u68.ld
|
LD_FILE = hw/bsp/lpcxpresso11u68/lpc11u68.ld
|
||||||
|
|
||||||
SRC_C += \
|
SRC_C += \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/chip_11u6x.c \
|
$(MCU_DIR)/cr_startup_lpc11u6x.c \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/clock_11u6x.c \
|
$(MCU_DIR)/lpc_chip_11u6x/src/chip_11u6x.c \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/gpio_11u6x.c \
|
$(MCU_DIR)/lpc_chip_11u6x/src/clock_11u6x.c \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/iocon_11u6x.c \
|
$(MCU_DIR)/lpc_chip_11u6x/src/gpio_11u6x.c \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/syscon_11u6x.c \
|
$(MCU_DIR)/lpc_chip_11u6x/src/iocon_11u6x.c \
|
||||||
hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/src/sysinit_11u6x.c
|
$(MCU_DIR)/lpc_chip_11u6x/src/syscon_11u6x.c \
|
||||||
|
$(MCU_DIR)/lpc_chip_11u6x/src/sysinit_11u6x.c
|
||||||
|
|
||||||
INC += \
|
INC += \
|
||||||
$(TOP)/hw/mcu/nxp/lpc_driver/lpc_chip_11u6x/inc
|
$(TOP)/$(MCU_DIR)/lpc_chip_11u6x/inc
|
||||||
|
|
||||||
# For TinyUSB port source
|
# For TinyUSB port source
|
||||||
VENDOR = nxp
|
VENDOR = nxp
|
||||||
|
|||||||
@ -1,352 +0,0 @@
|
|||||||
//*****************************************************************************
|
|
||||||
// LPC11U6x Microcontroller Startup code for use with LPCXpresso IDE
|
|
||||||
//
|
|
||||||
// Version : 140113
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// Copyright(C) NXP Semiconductors, 2014
|
|
||||||
// All rights reserved.
|
|
||||||
//
|
|
||||||
// Software that is described herein is for illustrative purposes only
|
|
||||||
// which provides customers with programming information regarding the
|
|
||||||
// LPC products. This software is supplied "AS IS" without any warranties of
|
|
||||||
// any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
||||||
// all warranties, express or implied, including all implied warranties of
|
|
||||||
// merchantability, fitness for a particular purpose and non-infringement of
|
|
||||||
// intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
||||||
// or liability for the use of the software, conveys no license or rights under any
|
|
||||||
// patent, copyright, mask work right, or any other intellectual property rights in
|
|
||||||
// or to any products. NXP Semiconductors reserves the right to make changes
|
|
||||||
// in the software without notification. NXP Semiconductors also makes no
|
|
||||||
// representation or warranty that such application will be suitable for the
|
|
||||||
// specified use without further testing or modification.
|
|
||||||
//
|
|
||||||
// Permission to use, copy, modify, and distribute this software and its
|
|
||||||
// documentation is hereby granted, under NXP Semiconductors' and its
|
|
||||||
// licensor's relevant copyrights in the software, without fee, provided that it
|
|
||||||
// is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
||||||
// copyright, permission, and disclaimer notice must appear in all copies of
|
|
||||||
// this code.
|
|
||||||
//*****************************************************************************
|
|
||||||
|
|
||||||
#if defined (__cplusplus)
|
|
||||||
#ifdef __REDLIB__
|
|
||||||
#error Redlib does not support C++
|
|
||||||
#else
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// The entry point for the C++ library startup
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
extern "C" {
|
|
||||||
extern void __libc_init_array(void);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define WEAK __attribute__ ((weak))
|
|
||||||
#define ALIAS(f) __attribute__ ((weak, alias (#f)))
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
#if defined (__cplusplus)
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
|
|
||||||
// Declaration of external SystemInit function
|
|
||||||
extern void SystemInit(void);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Patch the AEABI integer divide functions to use MCU's romdivide library
|
|
||||||
#ifdef __USE_ROMDIVIDE
|
|
||||||
// Location in memory that holds the address of the ROM Driver table
|
|
||||||
#define PTR_ROM_DRIVER_TABLE ((unsigned int *)(0x1FFF1FF8))
|
|
||||||
// Variables to store addresses of idiv and udiv functions within MCU ROM
|
|
||||||
unsigned int *pDivRom_idiv;
|
|
||||||
unsigned int *pDivRom_uidiv;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// Forward declaration of the default handlers. These are aliased.
|
|
||||||
// When the application defines a handler (with the same name), this will
|
|
||||||
// automatically take precedence over these weak definitions
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
void ResetISR(void);
|
|
||||||
WEAK void NMI_Handler(void);
|
|
||||||
WEAK void HardFault_Handler(void);
|
|
||||||
WEAK void SVC_Handler(void);
|
|
||||||
WEAK void PendSV_Handler(void);
|
|
||||||
WEAK void SysTick_Handler(void);
|
|
||||||
WEAK void IntDefaultHandler(void);
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// Forward declaration of the specific IRQ handlers. These are aliased
|
|
||||||
// to the IntDefaultHandler, which is a 'forever' loop. When the application
|
|
||||||
// defines a handler (with the same name), this will automatically take
|
|
||||||
// precedence over these weak definitions
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
void PIN_INT0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT2_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT3_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT4_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT5_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT6_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void PIN_INT7_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void GINT0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void GINT1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void I2C1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USART1_4_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USART2_3_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void SCT0_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void SSP1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void I2C0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void TIMER16_0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void TIMER16_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void TIMER32_0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void TIMER32_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void SSP0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USART0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USB_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USB_FIQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void ADCA_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void RTC_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void BOD_WDT_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void FMC_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void DMA_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void ADCB_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
void USBWakeup_IRQHandler (void) ALIAS(IntDefaultHandler);
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
// The entry point for the application.
|
|
||||||
// __main() is the entry point for redlib based applications
|
|
||||||
// main() is the entry point for newlib based applications
|
|
||||||
//*****************************************************************************
|
|
||||||
#if defined (__REDLIB__)
|
|
||||||
extern void __main(void);
|
|
||||||
#endif
|
|
||||||
extern int main(void);
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// External declaration for the pointer to the stack top from the Linker Script
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
extern void _vStackTop(void);
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
#if defined (__cplusplus)
|
|
||||||
} // extern "C"
|
|
||||||
#endif
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// The vector table. Note that the proper constructs must be placed on this to
|
|
||||||
// ensure that it ends up at physical address 0x0000.0000.
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
extern void (* const g_pfnVectors[])(void);
|
|
||||||
__attribute__ ((section(".isr_vector"))) __attribute__ ((used))
|
|
||||||
void (* const g_pfnVectors[])(void) = {
|
|
||||||
&_vStackTop, // The initial stack pointer
|
|
||||||
ResetISR, // The reset handler
|
|
||||||
NMI_Handler, // The NMI handler
|
|
||||||
HardFault_Handler, // The hard fault handler
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
SVC_Handler, // SVCall handler
|
|
||||||
0, // Reserved
|
|
||||||
0, // Reserved
|
|
||||||
PendSV_Handler, // The PendSV handler
|
|
||||||
SysTick_Handler, // The SysTick handler
|
|
||||||
|
|
||||||
// LPC11U6x specific handlers
|
|
||||||
PIN_INT0_IRQHandler, // 0 - GPIO pin interrupt 0
|
|
||||||
PIN_INT1_IRQHandler, // 1 - GPIO pin interrupt 1
|
|
||||||
PIN_INT2_IRQHandler, // 2 - GPIO pin interrupt 2
|
|
||||||
PIN_INT3_IRQHandler, // 3 - GPIO pin interrupt 3
|
|
||||||
PIN_INT4_IRQHandler, // 4 - GPIO pin interrupt 4
|
|
||||||
PIN_INT5_IRQHandler, // 5 - GPIO pin interrupt 5
|
|
||||||
PIN_INT6_IRQHandler, // 6 - GPIO pin interrupt 6
|
|
||||||
PIN_INT7_IRQHandler, // 7 - GPIO pin interrupt 7
|
|
||||||
GINT0_IRQHandler, // 8 - GPIO GROUP0 interrupt
|
|
||||||
GINT1_IRQHandler, // 9 - GPIO GROUP1 interrupt
|
|
||||||
I2C1_IRQHandler, // 10 - I2C1
|
|
||||||
USART1_4_IRQHandler, // 11 - combined USART1 & 4 interrupt
|
|
||||||
USART2_3_IRQHandler, // 12 - combined USART2 & 3 interrupt
|
|
||||||
SCT0_1_IRQHandler, // 13 - combined SCT0 and 1 interrupt
|
|
||||||
SSP1_IRQHandler, // 14 - SPI/SSP1 Interrupt
|
|
||||||
I2C0_IRQHandler, // 15 - I2C0
|
|
||||||
TIMER16_0_IRQHandler, // 16 - CT16B0 (16-bit Timer 0)
|
|
||||||
TIMER16_1_IRQHandler, // 17 - CT16B1 (16-bit Timer 1)
|
|
||||||
TIMER32_0_IRQHandler, // 18 - CT32B0 (32-bit Timer 0)
|
|
||||||
TIMER32_1_IRQHandler, // 19 - CT32B1 (32-bit Timer 1)
|
|
||||||
SSP0_IRQHandler, // 20 - SPI/SSP0 Interrupt
|
|
||||||
USART0_IRQHandler, // 21 - USART0
|
|
||||||
USB_IRQHandler, // 22 - USB IRQ
|
|
||||||
USB_FIQHandler, // 23 - USB FIQ
|
|
||||||
ADCA_IRQHandler, // 24 - ADC A(A/D Converter)
|
|
||||||
RTC_IRQHandler, // 25 - Real Time CLock interrpt
|
|
||||||
BOD_WDT_IRQHandler, // 25 - Combined Brownout/Watchdog interrupt
|
|
||||||
FMC_IRQHandler, // 27 - IP2111 Flash Memory Controller
|
|
||||||
DMA_IRQHandler, // 28 - DMA interrupt
|
|
||||||
ADCB_IRQHandler, // 24 - ADC B (A/D Converter)
|
|
||||||
USBWakeup_IRQHandler, // 30 - USB wake-up interrupt
|
|
||||||
0, // 31 - Reserved
|
|
||||||
};
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
// Functions to carry out the initialization of RW and BSS data sections. These
|
|
||||||
// are written as separate functions rather than being inlined within the
|
|
||||||
// ResetISR() function in order to cope with MCUs with multiple banks of
|
|
||||||
// memory.
|
|
||||||
//*****************************************************************************
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
|
|
||||||
unsigned int *pulDest = (unsigned int*) start;
|
|
||||||
unsigned int *pulSrc = (unsigned int*) romstart;
|
|
||||||
unsigned int loop;
|
|
||||||
for (loop = 0; loop < len; loop = loop + 4)
|
|
||||||
*pulDest++ = *pulSrc++;
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void bss_init(unsigned int start, unsigned int len) {
|
|
||||||
unsigned int *pulDest = (unsigned int*) start;
|
|
||||||
unsigned int loop;
|
|
||||||
for (loop = 0; loop < len; loop = loop + 4)
|
|
||||||
*pulDest++ = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
// The following symbols are constructs generated by the linker, indicating
|
|
||||||
// the location of various points in the "Global Section Table". This table is
|
|
||||||
// created by the linker via the Code Red managed linker script mechanism. It
|
|
||||||
// contains the load address, execution address and length of each RW data
|
|
||||||
// section and the execution and length of each BSS (zero initialized) section.
|
|
||||||
//*****************************************************************************
|
|
||||||
extern unsigned int __data_section_table;
|
|
||||||
extern unsigned int __data_section_table_end;
|
|
||||||
extern unsigned int __bss_section_table;
|
|
||||||
extern unsigned int __bss_section_table_end;
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
// Reset entry point for your code.
|
|
||||||
// Sets up a simple runtime environment and initializes the C/C++
|
|
||||||
// library.
|
|
||||||
//*****************************************************************************
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void
|
|
||||||
ResetISR(void) {
|
|
||||||
|
|
||||||
// Optionally enable RAM banks that may be off by default at reset
|
|
||||||
#if !defined (DONT_ENABLE_DISABLED_RAMBANKS)
|
|
||||||
volatile unsigned int *SYSCON_SYSAHBCLKCTRL = (unsigned int *) 0x40048080;
|
|
||||||
// Ensure that RAM1(26) and USBSRAM(27) bits in SYSAHBCLKCTRL are set
|
|
||||||
*SYSCON_SYSAHBCLKCTRL |= (1 << 26) | (1 <<27);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Copy the data sections from flash to SRAM.
|
|
||||||
//
|
|
||||||
unsigned int LoadAddr, ExeAddr, SectionLen;
|
|
||||||
unsigned int *SectionTableAddr;
|
|
||||||
|
|
||||||
// Load base address of Global Section Table
|
|
||||||
SectionTableAddr = &__data_section_table;
|
|
||||||
|
|
||||||
// Copy the data sections from flash to SRAM.
|
|
||||||
while (SectionTableAddr < &__data_section_table_end) {
|
|
||||||
LoadAddr = *SectionTableAddr++;
|
|
||||||
ExeAddr = *SectionTableAddr++;
|
|
||||||
SectionLen = *SectionTableAddr++;
|
|
||||||
data_init(LoadAddr, ExeAddr, SectionLen);
|
|
||||||
}
|
|
||||||
// At this point, SectionTableAddr = &__bss_section_table;
|
|
||||||
// Zero fill the bss segment
|
|
||||||
while (SectionTableAddr < &__bss_section_table_end) {
|
|
||||||
ExeAddr = *SectionTableAddr++;
|
|
||||||
SectionLen = *SectionTableAddr++;
|
|
||||||
bss_init(ExeAddr, SectionLen);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Patch the AEABI integer divide functions to use MCU's romdivide library
|
|
||||||
#ifdef __USE_ROMDIVIDE
|
|
||||||
// Get address of Integer division routines function table in ROM
|
|
||||||
unsigned int *div_ptr = (unsigned int *)((unsigned int *)*(PTR_ROM_DRIVER_TABLE))[4];
|
|
||||||
// Get addresses of integer divide routines in ROM
|
|
||||||
// These address are then used by the code in aeabi_romdiv_patch.s
|
|
||||||
pDivRom_idiv = (unsigned int *)div_ptr[0];
|
|
||||||
pDivRom_uidiv = (unsigned int *)div_ptr[1];
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
|
|
||||||
SystemInit();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (__cplusplus)
|
|
||||||
//
|
|
||||||
// Call C++ library initialisation
|
|
||||||
//
|
|
||||||
__libc_init_array();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (__REDLIB__)
|
|
||||||
// Call the Redlib library, which in turn calls main()
|
|
||||||
__main() ;
|
|
||||||
#else
|
|
||||||
main();
|
|
||||||
#endif
|
|
||||||
//
|
|
||||||
// main() shouldn't return, but if it does, we'll just enter an infinite loop
|
|
||||||
//
|
|
||||||
while (1) {
|
|
||||||
;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
// Default exception handlers. Override the ones here by defining your own
|
|
||||||
// handler routines in your application code.
|
|
||||||
//*****************************************************************************
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void NMI_Handler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void HardFault_Handler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void SVC_Handler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void PendSV_Handler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void SysTick_Handler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
|
|
||||||
//*****************************************************************************
|
|
||||||
//
|
|
||||||
// Processor ends up here if an unexpected interrupt occurs or a specific
|
|
||||||
// handler is not present in the application code.
|
|
||||||
//
|
|
||||||
//*****************************************************************************
|
|
||||||
__attribute__ ((section(".after_vectors")))
|
|
||||||
void IntDefaultHandler(void)
|
|
||||||
{ while(1) { }
|
|
||||||
}
|
|
||||||
@ -27,12 +27,14 @@
|
|||||||
#include "chip.h"
|
#include "chip.h"
|
||||||
#include "../board.h"
|
#include "../board.h"
|
||||||
|
|
||||||
#define LED_PORT 2
|
#define LED_PORT 2
|
||||||
#define LED_PIN 17
|
#define LED_PIN 17
|
||||||
#define LED_STATE_ON 0
|
#define LED_STATE_ON 0
|
||||||
|
|
||||||
#define BUTTON_PORT 0
|
// Wake up Swtich
|
||||||
#define BUTTON_PIN 1
|
#define BUTTON_PORT 0
|
||||||
|
#define BUTTON_PIN 16
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
/* System oscillator rate and RTC oscillator rate */
|
/* System oscillator rate and RTC oscillator rate */
|
||||||
const uint32_t OscRateIn = 12000000;
|
const uint32_t OscRateIn = 12000000;
|
||||||
@ -93,8 +95,7 @@ void board_led_write(bool state)
|
|||||||
|
|
||||||
uint32_t board_button_read(void)
|
uint32_t board_button_read(void)
|
||||||
{
|
{
|
||||||
// active low
|
return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
|
||||||
return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
int board_uart_read(uint8_t* buf, int len)
|
int board_uart_read(uint8_t* buf, int len)
|
||||||
|
|||||||
@ -1 +1 @@
|
|||||||
Subproject commit 4f2ec98c1ad087556c0101a4f6ef330437aa4aa1
|
Subproject commit 42dac0b08d94986bd5423c6327b097fec0c47911
|
||||||
Loading…
x
Reference in New Issue
Block a user