Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

couldn't get g4 usb clock and pin setup just yet. Leave it as it is for now

Browse Source
This commit is contained in:
hathach 2021-11-04 17:52:55 +07:00
parent f90f5ea369
commit 310f287f44
2 changed files with 52 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
hw/bsp/stm32g4/boards/stm32g474nucleo/board.h
View File

@ -31,6 +31,10 @@
extern "C" {
#endif
// G474RE Nucleo does not has usb connection. We need to manually connect
// - PA11 for D+, CN10.14
// - PA12 for D-, CN10.12
// LED
#define LED_PORT GPIOA
#define LED_PIN GPIO_PIN_5
@ -49,6 +53,7 @@
#define UART_TX_PIN GPIO_PIN_2
#define UART_RX_PIN GPIO_PIN_3
//--------------------------------------------------------------------+
// RCC Clock
//--------------------------------------------------------------------+
@ -81,6 +86,36 @@ static inline void board_clock_init(void)
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_8);
#if 0 // TODO need to check if USB clock is enabled
/* Enable HSI48 */
memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct));
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48;
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/*Enable CRS Clock*/
RCC_CRSInitTypeDef RCC_CRSInitStruct= {0};
__HAL_RCC_CRS_CLK_ENABLE();
/* Default Synchro Signal division factor (not divided) */
RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
/* Set the SYNCSRC[1:0] bits according to CRS_Source value */
RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
/* HSI48 is synchronized with USB SOF at 1KHz rate */
RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT;
/* Set the TRIM[5:0] to the default value */
RCC_CRSInitStruct.HSI48CalibrationValue = RCC_CRS_HSI48CALIBRATION_DEFAULT;
/* Start automatic synchronization */
HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
#endif
}
static inline void board_vbus_sense_init(void)

21
hw/bsp/stm32g4/family.c
View File

@ -31,14 +31,19 @@
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void OTG_FS_IRQHandler(void)
void USB_HP_IRQHandler(void)
{
tud_int_handler(0);
}
void OTG_HS_IRQHandler(void)
void USB_LP_IRQHandler(void)
{
tud_int_handler(1);
tud_int_handler(0);
}
void USBWakeUp_IRQHandler(void)
{
tud_int_handler(0);
}
//--------------------------------------------------------------------+
@ -111,7 +116,15 @@ void board_init(void)
HAL_UART_Init(&UartHandle);
#endif
// TODO Configure USB GPIOs
// USB Pins TODO double check USB clock and pin setup
// Configure USB DM and DP pins. This is optional, and maintained only for user guidance.
// GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
// GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
// GPIO_InitStruct.Pull = GPIO_NOPULL;
// GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
// HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
//
// __HAL_RCC_USB_CLK_ENABLE();
board_vbus_sense_init();
}