merge tusb_dcd_control_stall() to tusb_dcd_edpt_stall()

hw/mcu/nordic/nrf52/tusb_port/dcd_nrf52.c

@@ -85,7 +85,7 @@ typedef struct
 }_dcd;
 
 /*------------------------------------------------------------------*/
-/* Controller API
+/* Controller Start up Sequence
  *------------------------------------------------------------------*/
 static bool hfclk_running(void)
 {
@@ -351,12 +351,6 @@ bool tusb_dcd_control_xfer (uint8_t port, tusb_dir_t dir, uint8_t * buffer, uint
 
   return true;
 }
-void tusb_dcd_control_stall (uint8_t port)
-{
-  (void) port;
-  NRF_USBD->TASKS_EP0STALL = 1;
-  __ISB(); __DSB();
-}
 
 /*------------------------------------------------------------------*/
 /*
@@ -449,12 +443,26 @@ bool tusb_dcd_edpt_queue_xfer (uint8_t port, uint8_t ep_addr, uint8_t * buffer,
 
 void tusb_dcd_edpt_stall (uint8_t port, uint8_t ep_addr)
 {
+  (void) port;
 
+  if ( ep_addr == 0)
+  {
+    NRF_USBD->TASKS_EP0STALL = 1;
+  }else
+  {
+    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_Stall << USBD_EPSTALL_STALL_Pos) | ep_addr;
+  }
+
+  __ISB(); __DSB();
 }
 
 void tusb_dcd_edpt_clear_stall (uint8_t port, uint8_t ep_addr)
 {
-
+  (void) port;
+  if ( ep_addr )
+  {
+    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | ep_addr;
+  }
 }
 
 bool tusb_dcd_edpt_busy (uint8_t port, uint8_t ep_addr)

hw/mcu/nxp/lpc43xx/tusb_port/dcd_lpc43xx.c

@@ -230,10 +230,6 @@ static inline uint8_t qtd_find_free(uint8_t port)
 //--------------------------------------------------------------------+
 // CONTROL PIPE API
 //--------------------------------------------------------------------+
-void tusb_dcd_control_stall(uint8_t port)
-{
-  LPC_USB[port]->ENDPTCTRL0 |= (ENDPTCTRL_MASK_STALL << 16); // stall Control IN TODO stall control OUT as well
-}
 
 // control transfer does not need to use qtd find function
 // follows UM 24.10.8.1.1 Setup packet handling using setup lockout mechanism
@@ -277,7 +273,14 @@ void tusb_dcd_edpt_stall(uint8_t port, uint8_t ep_addr)
   uint8_t ep_idx    = edpt_addr2phy(ep_addr);
   volatile uint32_t * reg_control = get_reg_control_addr(port, ep_idx);
 
-  (*reg_control) |= ENDPTCTRL_MASK_STALL << (ep_idx & 0x01 ? 16 : 0);
+  if ( ep_addr == 0)
+  {
+    // Stall both Control IN and OUT
+    (*reg_control) |= ( (ENDPTCTRL_MASK_STALL << 16) || (ENDPTCTRL_MASK_STALL << 0) );
+  }else
+  {
+    (*reg_control) |= ENDPTCTRL_MASK_STALL << (ep_idx & 0x01 ? 16 : 0);
+  }
 }
 
 void tusb_dcd_edpt_clear_stall(uint8_t port, uint8_t ep_addr)
@@ -475,7 +478,9 @@ void hal_dcd_isr(uint8_t port)
           if ( p_qtd->int_on_complete )
           {
             bool succeeded = ( p_qtd->xact_err || p_qtd->halted || p_qtd->buffer_err ) ? false : true;
-            tusb_dcd_xfer_complete(port, 0, 0, succeeded); // TODO xferred bytes for control xfer is not needed yet !!!!
+            (void) succeeded;
+
+            tusb_dcd_control_complete(port);
           }
         }
       }

tinyusb/device/usbd.c

@@ -382,7 +382,7 @@ tusb_error_t usbd_control_request_subtask(uint8_t port, tusb_control_request_t c
   if(TUSB_ERROR_NONE != error)
   {
     // Response with Protocol Stall if request is not supported
-    tusb_dcd_control_stall(port);
+    tusb_dcd_edpt_stall(port, 0);
   }else if (p_request->wLength == 0)
   {
     usbd_control_status(port, 1-p_request->bmRequestType_bit.direction);
@@ -546,6 +546,10 @@ void tusb_dcd_xfer_complete(uint8_t port, uint8_t ep_addr, uint32_t xferred_byte
 {
   if (ep_addr == 0 )
   {
+    (void) port;
+    (void) xferred_bytes;
+    (void) succeeded;
+
     // Control Transfer
     osal_semaphore_post( usbd_control_xfer_sem_hdl );
   }else
@@ -557,7 +561,7 @@ void tusb_dcd_xfer_complete(uint8_t port, uint8_t ep_addr, uint32_t xferred_byte
         .sub_event_id = succeeded ? TUSB_EVENT_XFER_COMPLETE : TUSB_EVENT_XFER_ERROR
     };
 
-    task_event.xfer_done.ep_addr    = ep_addr;
+    task_event.xfer_done.ep_addr      = ep_addr;
     task_event.xfer_done.xferred_byte = xferred_bytes;
 
     osal_queue_send(usbd_queue_hdl, &task_event);

tinyusb/tusb_dcd.h

@@ -73,24 +73,28 @@ void tusb_dcd_set_config       (uint8_t port, uint8_t config_num);
  *------------------------------------------------------------------*/
 void tusb_dcd_bus_event        (uint8_t port, usbd_bus_event_type_t bus_event);
 void tusb_dcd_setup_received   (uint8_t port, uint8_t const* p_request);
-void tusb_dcd_xfer_complete    (uint8_t port, uint8_t edpt_addr, uint32_t xferred_bytes, bool succeeded);
+void tusb_dcd_xfer_complete    (uint8_t port, uint8_t ep_addr, uint32_t xferred_bytes, bool succeeded);
+
+static inline void tusb_dcd_control_complete(uint8_t port)
+{
+  // TODO all control complete is successful !!
+  tusb_dcd_xfer_complete(port, 0, 0, true);
+}
 
 /*------------------------------------------------------------------*/
 /* Endpoint API
  *------------------------------------------------------------------*/
-
 //------------- Control Endpoint -------------//
 bool tusb_dcd_control_xfer     (uint8_t port, tusb_dir_t dir, uint8_t * buffer, uint16_t length);
-void tusb_dcd_control_stall    (uint8_t port);
 
 //------------- Other Endpoints -------------//
 bool tusb_dcd_edpt_open        (uint8_t port, tusb_descriptor_endpoint_t const * p_endpoint_desc);
-bool tusb_dcd_edpt_xfer        (uint8_t port, uint8_t edpt_addr, uint8_t * buffer, uint16_t total_bytes, bool int_on_complete);
+bool tusb_dcd_edpt_xfer        (uint8_t port, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool int_on_complete);
-bool tusb_dcd_edpt_queue_xfer  (uint8_t port, uint8_t edpt_addr, uint8_t * buffer, uint16_t total_bytes); // only queue, not transferring yet
+bool tusb_dcd_edpt_queue_xfer  (uint8_t port, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); // only queue, not transferring yet
-bool tusb_dcd_edpt_busy        (uint8_t port, uint8_t edpt_addr);
+bool tusb_dcd_edpt_busy        (uint8_t port, uint8_t ep_addr);
 
-void tusb_dcd_edpt_stall       (uint8_t port, uint8_t edpt_addr);
+void tusb_dcd_edpt_stall       (uint8_t port, uint8_t ep_addr);
-void tusb_dcd_edpt_clear_stall (uint8_t port, uint8_t edpt_addr);
+void tusb_dcd_edpt_clear_stall (uint8_t port, uint8_t ep_addr);
 
 #ifdef __cplusplus
  }