update build script to correctly skip non max3421 enabled for espressif boards

hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake

@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32")
+set(MAX3421_HOST 1)

hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.cmake

@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32s2")
+set(MAX3421_HOST 1)

hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.cmake

@@ -0,0 +1,3 @@
+# Apply board specific content here
+set(IDF_TARGET "esp32s3")
+set(MAX3421_HOST 1)

hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h

@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define NEOPIXEL_PIN          33
+#define NEOPIXEL_POWER_PIN    21
+#define NEOPIXEL_POWER_STATE  1
+
+#define BUTTON_PIN            0
+#define BUTTON_STATE_ACTIVE   0
+
+// SPI for USB host shield
+#define MAX3421_SPI_HOST SPI2_HOST
+#define MAX3421_SCK_PIN  36
+#define MAX3421_MOSI_PIN 35
+#define MAX3421_MISO_PIN 37
+#define MAX3421_CS_PIN   10
+#define MAX3421_INTR_PIN 9
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.cmake

@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32s2")
+set(MAX3421_HOST 1)

hw/bsp/espressif/boards/espressif_c3_devkitc/board.cmake

@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32c3")
+set(MAX3421_HOST 1)

hw/bsp/espressif/boards/espressif_c6_devkitc/board.cmake

@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32c6")
+set(MAX3421_HOST 1)

tools/build.py

@@ -84,10 +84,13 @@ def cmake_board(board, toolchain):
         # for espressif, we have to build example individually
         all_examples = get_examples(family)
         for example in all_examples:
-            rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" -DBOARD={board} -DMAX3421_HOST=1')
-            if rcmd.returncode == 0:
-                rcmd = run_cmd(f'cmake --build {build_dir}/{example}')
-            ret[0 if rcmd.returncode == 0 else 1] += 1
+            if build_utils.skip_example(example, board):
+                ret[2] += 1
+            else:
+                rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" -DBOARD={board}')
+                if rcmd.returncode == 0:
+                    rcmd = run_cmd(f'cmake --build {build_dir}/{example}')
+                ret[0 if rcmd.returncode == 0 else 1] += 1
     else:
         rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel -DTOOLCHAIN={toolchain}')
         if rcmd.returncode == 0:

tools/build_utils.py

@@ -13,33 +13,25 @@ def skip_example(example, board):
     ex_dir = pathlib.Path('examples/') / example
     bsp = pathlib.Path("hw/bsp")
 
-    if (bsp / board / "board.mk").exists():
-        # board without family
-        board_dir = bsp / board
-        family = ""
-        mk_contents = ""
-    else:
-        # board within family
-        board_dir = list(bsp.glob("*/boards/" + board))
-        if not board_dir:
-            # Skip unknown boards
-            return True
+    # board within family
+    board_dir = list(bsp.glob("*/boards/" + board))
+    if not board_dir:
+        # Skip unknown boards
+        return True
 
-        board_dir = list(board_dir)[0]
+    board_dir = list(board_dir)[0]
+    family_dir = board_dir.parent.parent
+    family = family_dir.name
 
-        family_dir = board_dir.parent.parent
-        family = family_dir.name
-
-        # family.mk
-        family_mk = family_dir / "family.mk"
-        mk_contents = family_mk.read_text()
+    # family.mk
+    family_mk = family_dir / "family.mk"
+    mk_contents = family_mk.read_text()
 
     # Find the mcu, first in family mk then board mk
     if "CFG_TUSB_MCU=OPT_MCU_" not in mk_contents:
-        board_mk = board_dir / "board.cmake"
+        board_mk = board_dir / "board.mk"
         if not board_mk.exists():
-            board_mk = board_dir / "board.mk"
-
+            board_mk = board_dir / "board.cmake"
         mk_contents = board_mk.read_text()
 
     mcu = "NONE"
@@ -49,18 +41,23 @@ def skip_example(example, board):
             token = token.strip("\"")
             _, opt_mcu = token.split("=")
             mcu = opt_mcu[len("OPT_MCU_"):]
-            break
         if "esp32s2" in token:
             mcu = "ESP32S2"
-            break
         if "esp32s3" in token:
             mcu = "ESP32S3"
+        if mcu != "NONE":
             break
 
     # Skip all OPT_MCU_NONE these are WIP port
     if mcu == "NONE":
         return True
 
+    max3421_enabled = False
+    for line in mk_contents.splitlines():
+        if "MAX3421_HOST=1" in line or 'MAX3421_HOST 1' in line:
+            max3421_enabled = True
+            break
+
     skip_file = ex_dir / "skip.txt"
     only_file = ex_dir / "only.txt"
 
@@ -74,6 +71,7 @@ def skip_example(example, board):
     if only_file.exists():
         onlys = only_file.read_text().split()
         if not ("mcu:" + mcu in onlys or
+                ("mcu:MAX3421" in onlys and max3421_enabled) or
                 "board:" + board in onlys or
                 "family:" + family in onlys):
             return True