Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

Streamline settings for board.

Browse Source
This commit is contained in:
Gordon McNab 2021-10-07 17:00:28 +01:00
parent 8c40a74f29
commit 5e6edecaa3
2 changed files with 31 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
src/portable/bridgetek/ft9xx/dcd_ft9xx.c
View File

@ -24,11 +24,17 @@
* This file is part of the TinyUSB stack.
*/
/*
* Contains code adapted from Bridgetek Pte Ltd via license terms stated
* in https://brtchip.com/BRTSourceCodeLicenseAgreement
*/
#include "board.h"
#include "bsp/board.h"
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_FT90X
#if TUSB_OPT_DEVICE_ENABLED && \
(CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X)
#define USBD_USE_STREAMS
@ -250,12 +256,12 @@ static void _dcd_ft90x_attach(void)
CRITICAL_SECTION_BEGIN
// Turn off the device enable bit.
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED
#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED
USBD_REG(fctrl) = 0;
#else
#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED
//Set the full speed only bit if required.
USBD_REG(fctrl) = MASK_USBD_FCTRL_MODE_FS_ONLY;
#endif
#endif // BOARD_DEVICE_RHPORT_SPEED
// Clear first reset and suspend interrupts.
do
@ -301,7 +307,7 @@ static void _dcd_ft90x_detach(void)
delayms(1);
// Disable USB PHY
dcd_disconnect(0);
dcd_disconnect(BOARD_DEVICE_RHPORT_NUM);
delayms(1);
// Disable Chip USB device clock/PM configuration.
@ -333,7 +339,7 @@ static void _ft90x_usb_speed(void)
delayus(200);
}
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED
#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED
/* Detect high or full speed */
fctrl_val = MASK_USBD_FCTRL_USB_DEV_EN;
@ -357,11 +363,11 @@ static void _ft90x_usb_speed(void)
delayus(125 + 5);
_speed = (USBD_REG(cmif) & MASK_USBD_CMIF_SOFIRQ) ?
TUSB_SPEED_HIGH : TUSB_SPEED_FULL;
dcd_event_bus_reset(0, _speed, true);
dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
#endif /* !__FT930__ */
#else /* CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED */
#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED
/* User force set to full speed */
_speed = TUSB_SPEED_FULL;
@ -374,10 +380,10 @@ static void _ft90x_usb_speed(void)
}
#endif
USBD_REG(fctrl) = fctrl_val;
dcd_event_bus_reset(0, _speed, true);
dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
return;
#endif /* CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED */
#endif // BOARD_DEVICE_RHPORT_SPEED
}
// Send a buffer to the USB IN FIFO.
@ -557,7 +563,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
(void)dev_addr;
// Respond with status. There is no checking that the address is in range.
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
dcd_edpt_xfer(rhport, tu_edpt_addr(USBD_EP_0, TUSB_DIR_IN), NULL, 0);
// Set the update bit for the address register.
dev_addr |= 0x80;
@ -603,7 +609,7 @@ void dcd_remote_wakeup(uint8_t rhport)
SYS->MSC0CFG &= ~MASK_SYS_MSC0CFG_DEV_RMWAKEUP;
// Enable USB PHY and determine current bus speed.
dcd_connect(0);
dcd_connect(rhport);
}
// Connect by enabling internal pull-up resistor on D+/D-
@ -882,7 +888,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
void _ft90x_usbd_ISR(void)
{
tud_int_handler(0); // Resolves to dcd_int_handler().
tud_int_handler(BOARD_DEVICE_RHPORT_NUM); // Resolves to dcd_int_handler().
}
void dcd_int_handler(uint8_t rhport)
@ -920,19 +926,19 @@ void dcd_int_handler(uint8_t rhport)
{
// Reset endpoints to default state.
_ft90x_reset_edpts();
dcd_event_bus_reset(0, _speed, true);
dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
}
if (cmif & MASK_USBD_CMIF_SUSIRQ) //Handle Suspend interrupt
{
dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SUSPEND, true);
}
if (cmif & MASK_USBD_CMIF_RESIRQ) //Handle Resume interrupt
{
dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
}
if (cmif & MASK_USBD_CMIF_SOFIRQ) //Handle SOF interrupt
{
dcd_event_bus_signal(0, DCD_EVENT_SOF, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SOF, true);
}
}
// Handle endpoint interrupts.
@ -963,7 +969,7 @@ void dcd_int_handler(uint8_t rhport)
_ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request));
// Send the packet to tinyusb.
dcd_event_setup_received(0, _ft90x_setup_packet, true);
dcd_event_setup_received(BOARD_DEVICE_RHPORT_NUM, _ft90x_setup_packet, true);
// Clear the interrupt that signals a SETUP packet is received.
USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP);
@ -985,7 +991,7 @@ void dcd_int_handler(uint8_t rhport)
xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, (uint8_t *)ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes);
}
// Now signal completion of data packet.
dcd_event_xfer_complete(0, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true);
dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true);
// Allow new transfers on the control endpoint.
ep_xfer[USBD_EP_0].valid = 0;
@ -1042,7 +1048,7 @@ void dcd_int_handler(uint8_t rhport)
if (ep_xfer[ep_number].remain_size == 0)
{
// Signal tinyUSB.
dcd_event_xfer_complete(0, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true);
dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true);
// Allow new transfers on this endpoint.
ep_xfer[ep_number].valid = 0;
@ -1067,21 +1073,21 @@ void ft90x_usbd_pm_ISR(void)
{
// Signal connection interrupt
SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
}
if (pmcfg & MASK_SYS_PMCFG_DEV_DIS_DEV)
{
// Signal disconnection interrupt
SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_UNPLUGGED, true);
}
if (pmcfg & MASK_SYS_PMCFG_HOST_RST_DEV)
{
// Signal Host Reset interrupt
SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_BUS_RESET, true);
}
if (pmcfg & MASK_SYS_PMCFG_HOST_RESUME_DEV)
@ -1092,7 +1098,7 @@ void ft90x_usbd_pm_ISR(void)
{
// If we are driving K-state on Device USB port;
// We must maintain the 1ms requirement before resuming the phy
dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
}
}
}