mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-31 05:52:55 +08:00
move all nrf boards into its family group
This commit is contained in:
hathach
parent
f0ffe7b984
commit
630692d81b
@ -30,7 +30,6 @@ FAMILY_PATH = hw/bsp/$(FAMILY)
|
||||
BUILD = _build/build-$(BOARD)
|
||||
|
||||
# Include Family and Board specific defs
|
||||
-include $(TOP)/$(BOARD_PATH)/board.mk
|
||||
include $(TOP)/$(FAMILY_PATH)/family.mk
|
||||
|
||||
#-------------- Cross Compiler ------------
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
|
||||
|
||||
# flash using adafruit-nrfutil dfu
|
||||
flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip
|
||||
flash: $(BUILD)/$(BOARD)-firmware.zip
|
||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
|
||||
|
||||
# flash using adafruit-nrfutil dfu
|
||||
flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip
|
||||
flash: $(BUILD)/$(BOARD)-firmware.zip
|
||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
|
||||
|
||||
# flash using adafruit-nrfutil dfu
|
||||
flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip
|
||||
flash: $(BUILD)/$(BOARD)-firmware.zip
|
||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
|
||||
|
||||
# flash using adafruit-nrfutil dfu
|
||||
flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip
|
||||
flash: $(BUILD)/$(BOARD)-firmware.zip
|
||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
|
||||
|
||||
# flash using adafruit-nrfutil dfu
|
||||
flash-adafruit-nrfutil: $(BUILD)/$(BOARD)-firmware.zip
|
||||
flash: $(BUILD)/$(BOARD)-firmware.zip
|
||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200
|
||||
|
||||
@ -1,4 +1,7 @@
|
||||
LD_FILE ?= $(BOARD_PATH)/$(BOARD).ld
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
LD_FILE = $(BOARD_PATH)/$(BOARD).ld
|
||||
|
||||
# flash using Nordic nrfutil (pip3 install nrfutil)
|
||||
# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash
|
||||
|
||||
@ -1,3 +1,6 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
|
||||
|
||||
# flash using jlink
|
||||
|
||||
@ -1,3 +1,6 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
LD_FILE = $(BOARD_PATH)/$(BOARD).ld
|
||||
|
||||
# flash using Nordic nrfutil (pip2 install nrfutil)
|
||||
|
||||
7
hw/bsp/nrf/boards/pca10100/board.mk
Normal file
7
hw/bsp/nrf/boards/pca10100/board.mk
Normal file
@ -0,0 +1,7 @@
|
||||
MCU_VARIANT = nrf52833
|
||||
CFLAGS += -DNRF52833_XXAA
|
||||
|
||||
LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld
|
||||
|
||||
# flash using jlink
|
||||
flash: flash-jlink
|
||||
@ -1,3 +1,6 @@
|
||||
MCU_VARIANT = nrf52840
|
||||
CFLAGS += -DNRF52840_XXAA
|
||||
|
||||
LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
|
||||
|
||||
# flash using jlink
|
||||
|
||||
@ -61,8 +61,8 @@ void board_init(void)
|
||||
// stop LF clock just in case we jump from application without reset
|
||||
NRF_CLOCK->TASKS_LFCLKSTOP = 1UL;
|
||||
|
||||
// Config clock source: XTAL or RC in sdk_config.h
|
||||
NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
|
||||
// Use Internal OSC to compatible with all boards
|
||||
NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC;
|
||||
NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
|
||||
|
||||
// LED
|
||||
@ -121,7 +121,8 @@ void board_init(void)
|
||||
nrfx_power_init(&pwr_cfg);
|
||||
|
||||
// Register tusb function as USB power handler
|
||||
const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event };
|
||||
// cause cast-function-type warning
|
||||
const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) };
|
||||
nrfx_power_usbevt_init(&config);
|
||||
|
||||
nrfx_power_usbevt_enable();
|
||||
|
||||
@ -1,3 +1,5 @@
|
||||
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||
|
||||
CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
@ -6,7 +8,6 @@ CFLAGS += \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_NRF5X \
|
||||
-DNRF52840_XXAA \
|
||||
-DCONFIG_GPIO_AS_PINRESET
|
||||
|
||||
# suppress warning caused by vendor mcu driver
|
||||
@ -26,7 +27,7 @@ LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
|
||||
SRC_C += \
|
||||
hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
|
||||
hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
|
||||
hw/mcu/nordic/nrfx/mdk/system_nrf52840.c
|
||||
hw/mcu/nordic/nrfx/mdk/system_$(MCU_VARIANT).c
|
||||
|
||||
INC += \
|
||||
$(TOP)/$(BOARD_PATH) \
|
||||
@ -38,7 +39,7 @@ INC += \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/drivers/include \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/drivers/src \
|
||||
|
||||
SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S
|
||||
SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S
|
||||
|
||||
ASFLAGS += -D__HEAP_SIZE=0
|
||||
|
||||
@ -50,7 +51,7 @@ CHIP_FAMILY = nrf5x
|
||||
FREERTOS_PORT = ARM_CM4F
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = nRF52840_xxAA
|
||||
JLINK_DEVICE = $(MCU_VARIANT)_xxaa
|
||||
|
||||
# For uf2 conversion
|
||||
UF2_FAMILY = 0xADA52840
|
||||
|
||||
@ -1,55 +0,0 @@
|
||||
CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m4 \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-DNRF52833_XXAA \
|
||||
-DCONFIG_GPIO_AS_PINRESET \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_NRF5X
|
||||
|
||||
# suppress warning caused by vendor mcu driver
|
||||
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align
|
||||
|
||||
# due to tusb_hal_nrf_power_event
|
||||
GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
|
||||
ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
|
||||
CFLAGS += -Wno-error=cast-function-type
|
||||
endif
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld
|
||||
|
||||
LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
|
||||
|
||||
SRC_C += \
|
||||
hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
|
||||
hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
|
||||
hw/mcu/nordic/nrfx/mdk/system_nrf52833.c \
|
||||
|
||||
INC += \
|
||||
$(TOP)/lib/CMSIS_4/CMSIS/Include \
|
||||
$(TOP)/hw/mcu/nordic \
|
||||
$(TOP)/hw/mcu/nordic/nrfx \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/mdk \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/hal \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/drivers/include \
|
||||
$(TOP)/hw/mcu/nordic/nrfx/drivers/src \
|
||||
|
||||
SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52833.S
|
||||
|
||||
ASFLAGS += -D__HEAP_SIZE=0
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = nordic
|
||||
CHIP_FAMILY = nrf5x
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM4F
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = nRF52833_XXAA
|
||||
|
||||
# flash using jlink
|
||||
flash: flash-jlink
|
||||
@ -1,229 +0,0 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "bsp/board.h"
|
||||
|
||||
#include "nrfx.h"
|
||||
#include "nrfx/hal/nrf_gpio.h"
|
||||
#include "nrfx/drivers/include/nrfx_power.h"
|
||||
#include "nrfx/drivers/include/nrfx_uarte.h"
|
||||
|
||||
#ifdef SOFTDEVICE_PRESENT
|
||||
#include "nrf_sdm.h"
|
||||
#include "nrf_soc.h"
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
void USBD_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
/*------------------------------------------------------------------*/
|
||||
/* MACRO TYPEDEF CONSTANT ENUM
|
||||
*------------------------------------------------------------------*/
|
||||
#define LED_PIN 13
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
#define BUTTON_PIN 11
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
#define UART_RX_PIN 8
|
||||
#define UART_TX_PIN 6
|
||||
|
||||
static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0);
|
||||
//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context);
|
||||
|
||||
// tinyusb function that handles power event (detected, ready, removed)
|
||||
// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
|
||||
extern void tusb_hal_nrf_power_event(uint32_t event);
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
// stop LF clock just in case we jump from application without reset
|
||||
NRF_CLOCK->TASKS_LFCLKSTOP = 1UL;
|
||||
|
||||
// Use Internal OSC to compatible with all boards
|
||||
NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC;
|
||||
NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
|
||||
|
||||
// LED
|
||||
nrf_gpio_cfg_output(LED_PIN);
|
||||
board_led_write(false);
|
||||
|
||||
// Button
|
||||
nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP);
|
||||
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock/1000);
|
||||
|
||||
// UART
|
||||
nrfx_uarte_config_t uart_cfg =
|
||||
{
|
||||
.pseltxd = UART_TX_PIN,
|
||||
.pselrxd = UART_RX_PIN,
|
||||
.pselcts = NRF_UARTE_PSEL_DISCONNECTED,
|
||||
.pselrts = NRF_UARTE_PSEL_DISCONNECTED,
|
||||
.p_context = NULL,
|
||||
.baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE
|
||||
.interrupt_priority = 7,
|
||||
.hal_cfg = {
|
||||
.hwfc = NRF_UARTE_HWFC_DISABLED,
|
||||
.parity = NRF_UARTE_PARITY_EXCLUDED,
|
||||
}
|
||||
};
|
||||
|
||||
nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
|
||||
|
||||
#if TUSB_OPT_DEVICE_ENABLED
|
||||
// Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
|
||||
// 2 is highest for application
|
||||
NVIC_SetPriority(USBD_IRQn, 2);
|
||||
|
||||
// USB power may already be ready at this time -> no event generated
|
||||
// We need to invoke the handler based on the status initially
|
||||
uint32_t usb_reg;
|
||||
|
||||
#ifdef SOFTDEVICE_PRESENT
|
||||
uint8_t sd_en = false;
|
||||
sd_softdevice_is_enabled(&sd_en);
|
||||
|
||||
if ( sd_en ) {
|
||||
sd_power_usbdetected_enable(true);
|
||||
sd_power_usbpwrrdy_enable(true);
|
||||
sd_power_usbremoved_enable(true);
|
||||
|
||||
sd_power_usbregstatus_get(&usb_reg);
|
||||
}else
|
||||
#endif
|
||||
{
|
||||
// Power module init
|
||||
const nrfx_power_config_t pwr_cfg = { 0 };
|
||||
nrfx_power_init(&pwr_cfg);
|
||||
|
||||
// Register tusb function as USB power handler
|
||||
// cause cast-function-type warning
|
||||
const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) };
|
||||
nrfx_power_usbevt_init(&config);
|
||||
|
||||
nrfx_power_usbevt_enable();
|
||||
|
||||
usb_reg = NRF_POWER->USBREGSTATUS;
|
||||
}
|
||||
|
||||
if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
|
||||
if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
|
||||
#endif
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN);
|
||||
}
|
||||
|
||||
//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context)
|
||||
//{
|
||||
//
|
||||
//}
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0;
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef SOFTDEVICE_PRESENT
|
||||
// process SOC event from SD
|
||||
uint32_t proc_soc(void)
|
||||
{
|
||||
uint32_t soc_evt;
|
||||
uint32_t err = sd_evt_get(&soc_evt);
|
||||
|
||||
if (NRF_SUCCESS == err)
|
||||
{
|
||||
/*------------- usb power event handler -------------*/
|
||||
int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED:
|
||||
(soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY :
|
||||
(soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1;
|
||||
|
||||
if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt);
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
uint32_t proc_ble(void)
|
||||
{
|
||||
// do nothing with ble
|
||||
return NRF_ERROR_NOT_FOUND;
|
||||
}
|
||||
|
||||
void SD_EVT_IRQHandler(void)
|
||||
{
|
||||
// process BLE and SOC until there is no more events
|
||||
while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) )
|
||||
{
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info)
|
||||
{
|
||||
(void) id;
|
||||
(void) pc;
|
||||
(void) info;
|
||||
}
|
||||
#endif
|
||||
Loading…
x
Reference in New Issue
Block a user