stm32h750dk: Add linker script

hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake

@@ -1,7 +1,7 @@
 set(MCU_VARIANT stm32h750xx)
 set(JLINK_DEVICE stm32h750xb_m7)
 
-set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_CM7.ld)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${MCU_VARIANT}_flash_CM7.ld)
 set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf)
 
 function(update_board TARGET)

hw/bsp/stm32h7/boards/stm32h750bdk/board.mk

@@ -8,7 +8,7 @@ PORT ?= 0
 
 # GCC
 SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s
-LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h750xx_flash_CM7.ld
+LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld
 
 # IAR
 SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s

hw/bsp/stm32h7/boards/stm32h750bdk/stm32h750xx_flash_CM7.ld

@@ -0,0 +1,173 @@
+/*
+******************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**
+**  Abstract    : Linker script for STM32H7 series
+**                128Kbytes FLASH and 1Mbytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed <20>as is,<2C> without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** Copyright (c) 2019 STMicroelectronics.
+** All rights reserved.
+**
+** This software component is licensed by ST under BSD 3-Clause license,
+** the "License"; You may not use this file except in compliance with the
+** License. You may obtain a copy of the License at:
+**                        opensource.org/licenses/BSD-3-Clause
+**
+****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20020000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 128K
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 1M
+ITCMRAM (xrw)      : ORIGIN = 0x00000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+