change tuh_control_xfer_t struct

src/class/cdc/cdc_host.c

@@ -124,9 +124,7 @@ bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_co
 {
   cdch_data_t const * p_cdc = get_itf(dev_addr);
 
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -138,8 +136,12 @@ bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_co
     .wValue   = (rts ? 2 : 0) | (dtr ? 1 : 0),
     .wIndex   = p_cdc->itf_num,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = 0

src/class/hid/hid_host.c

@@ -105,11 +105,11 @@ uint8_t tuh_hid_get_protocol(uint8_t dev_addr, uint8_t instance)
 
 static bool set_protocol_complete(uint8_t dev_addr, tuh_control_xfer_t const * xfer,  xfer_result_t result)
 {
-  uint8_t const itf_num     = (uint8_t) xfer->request.wIndex;
+  uint8_t const itf_num     = (uint8_t) xfer->setup->wIndex;
   uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
   hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
 
-  if (XFER_RESULT_SUCCESS == result) hid_itf->protocol_mode = (uint8_t) xfer->request.wValue;
+  if (XFER_RESULT_SUCCESS == result) hid_itf->protocol_mode = (uint8_t) xfer->setup->wValue;
 
   if (tuh_hid_set_protocol_complete_cb)
   {
@@ -124,9 +124,7 @@ static bool _hidh_set_protocol(uint8_t dev_addr, uint8_t itf_num, uint8_t protoc
 {
   TU_LOG2("HID Set Protocol = %d\r\n", protocol);
 
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -138,8 +136,12 @@ static bool _hidh_set_protocol(uint8_t dev_addr, uint8_t itf_num, uint8_t protoc
     .wValue   = protocol,
     .wIndex   = itf_num,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -163,13 +165,13 @@ static bool set_report_complete(uint8_t dev_addr, tuh_control_xfer_t const * xfe
 
   if (tuh_hid_set_report_complete_cb)
   {
-    uint8_t const itf_num     = (uint8_t) xfer->request.wIndex;
+    uint8_t const itf_num     = (uint8_t) xfer->setup->wIndex;
     uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
 
-    uint8_t const report_type = tu_u16_high(xfer->request.wValue);
+    uint8_t const report_type = tu_u16_high(xfer->setup->wValue);
-    uint8_t const report_id   = tu_u16_low(xfer->request.wValue);
+    uint8_t const report_id   = tu_u16_low(xfer->setup->wValue);
 
-    tuh_hid_set_report_complete_cb(dev_addr, instance, report_id, report_type, (result == XFER_RESULT_SUCCESS) ? xfer->request.wLength : 0);
+    tuh_hid_set_report_complete_cb(dev_addr, instance, report_id, report_type, (result == XFER_RESULT_SUCCESS) ? xfer->setup->wLength : 0);
   }
 
   return true;
@@ -180,9 +182,7 @@ bool tuh_hid_set_report(uint8_t dev_addr, uint8_t instance, uint8_t report_id, u
   hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
   TU_LOG2("HID Set Report: id = %u, type = %u, len = %u\r\n", report_id, report_type, len);
 
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -194,8 +194,12 @@ bool tuh_hid_set_report(uint8_t dev_addr, uint8_t instance, uint8_t report_id, u
     .wValue   = tu_u16(report_type, report_id),
     .wIndex   = hid_itf->itf_num,
     .wLength  = len
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = report,
     .complete_cb = set_report_complete,
     .user_arg    = 0
@@ -209,9 +213,7 @@ static bool _hidh_set_idle(uint8_t dev_addr, uint8_t itf_num, uint16_t idle_rate
 {
   // SET IDLE request, device can stall if not support this request
   TU_LOG2("HID Set Idle \r\n");
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -223,8 +225,12 @@ static bool _hidh_set_idle(uint8_t dev_addr, uint8_t itf_num, uint16_t idle_rate
     .wValue   = idle_rate,
     .wIndex   = itf_num,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -387,24 +393,27 @@ static bool process_set_config(uint8_t dev_addr, tuh_control_xfer_t const * xfer
 
 bool hidh_set_config(uint8_t dev_addr, uint8_t itf_num)
 {
+  tusb_control_request_t request;
+  request.wIndex = tu_htole16((uint16_t) itf_num);
+
   tuh_control_xfer_t xfer;
-  xfer.request.wIndex = tu_htole16((uint16_t) itf_num);
+  xfer.setup = &request;
   xfer.user_arg = CONFG_SET_IDLE;
 
-  // start the set config process
+  // fake request to start the set config process
   return process_set_config(dev_addr, &xfer, XFER_RESULT_SUCCESS);
 }
 
 static bool process_set_config(uint8_t dev_addr, tuh_control_xfer_t const * xfer,  xfer_result_t result)
 {
   // Stall is a valid response for SET_IDLE, therefore we could ignore its result
-  if ( xfer->request.bRequest != HID_REQ_CONTROL_SET_IDLE )
+  if ( xfer->setup->bRequest != HID_REQ_CONTROL_SET_IDLE )
   {
     TU_ASSERT(result == XFER_RESULT_SUCCESS);
   }
 
   uintptr_t const state     = xfer->user_arg;
-  uint8_t const itf_num     = (uint8_t) tu_le16toh(xfer->request.wIndex);
+  uint8_t const itf_num     = (uint8_t) tu_le16toh(xfer->setup->wIndex);
   uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
   hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
 
@@ -441,7 +450,7 @@ static bool process_set_config(uint8_t dev_addr, tuh_control_xfer_t const * xfer
     case CONFIG_COMPLETE:
     {
       uint8_t const* desc_report = usbh_get_enum_buf();
-      uint16_t const desc_len    = xfer->request.wLength;
+      uint16_t const desc_len    = xfer->setup->wLength;
 
       config_driver_mount_complete(dev_addr, instance, desc_report, desc_len);
     }

src/class/msc/msc_host.c

@@ -405,9 +405,7 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num)
 
   //------------- Get Max Lun -------------//
   TU_LOG2("MSC Get Max Lun\r\n");
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -419,8 +417,12 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num)
     .wValue   = 0,
     .wIndex   = itf_num,
     .wLength  = 1
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = &p_msc->max_lun,
     .complete_cb = config_get_maxlun_complete,
     .user_arg    = 0

src/host/hub.c

@@ -80,9 +80,7 @@ static char const* const _hub_feature_str[] =
 bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
                             tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg)
 {
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -94,8 +92,12 @@ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
     .wValue   = feature,
     .wIndex   = hub_port,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -109,9 +111,7 @@ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
 bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
                           tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg)
 {
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -123,8 +123,12 @@ bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
     .wValue   = feature,
     .wIndex   = hub_port,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -138,9 +142,7 @@ bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
 bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp,
                          tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg)
 {
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -152,8 +154,12 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp,
     .wValue   = 0,
     .wIndex   = hub_port,
     .wLength  = 4
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = resp,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -228,9 +234,7 @@ bool hub_set_config(uint8_t dev_addr, uint8_t itf_num)
   TU_ASSERT(itf_num == p_hub->itf_num);
 
   // Get Hub Descriptor
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -242,8 +246,12 @@ bool hub_set_config(uint8_t dev_addr, uint8_t itf_num)
     .wValue   = 0,
     .wIndex   = 0,
     .wLength  = sizeof(descriptor_hub_desc_t)
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = _hub_buffer,
     .complete_cb = config_set_port_power,
     .user_arg    = 0
@@ -277,7 +285,7 @@ static bool config_port_power_complete (uint8_t dev_addr, tuh_control_xfer_t con
   TU_ASSERT(XFER_RESULT_SUCCESS == result);
    hub_interface_t* p_hub = get_itf(dev_addr);
 
-  if (xfer->request.wIndex == p_hub->port_count)
+  if (xfer->setup->wIndex == p_hub->port_count)
   {
     // All ports are power -> queue notification status endpoint and
     // complete the SET CONFIGURATION
@@ -287,7 +295,7 @@ static bool config_port_power_complete (uint8_t dev_addr, tuh_control_xfer_t con
   }else
   {
     // power next port
-    uint8_t const hub_port = (uint8_t) (xfer->request.wIndex + 1);
+    uint8_t const hub_port = (uint8_t) (xfer->setup->wIndex + 1);
     return hub_port_set_feature(dev_addr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete, 0);
   }
 
@@ -333,7 +341,7 @@ static bool connection_get_status_complete (uint8_t dev_addr, tuh_control_xfer_t
   TU_ASSERT(result == XFER_RESULT_SUCCESS);
 
   hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) xfer->request.wIndex;
+  uint8_t const port_num = (uint8_t) xfer->setup->wIndex;
 
   // Connection change
   if (p_hub->port_status.change.connection)
@@ -361,7 +369,7 @@ static bool connection_clear_conn_change_complete (uint8_t dev_addr, tuh_control
   TU_ASSERT(result == XFER_RESULT_SUCCESS);
 
   hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) xfer->request.wIndex;
+  uint8_t const port_num = (uint8_t) xfer->setup->wIndex;
 
   if ( p_hub->port_status.status.connection )
   {
@@ -392,7 +400,7 @@ static bool connection_port_reset_complete (uint8_t dev_addr, tuh_control_xfer_t
   TU_ASSERT(result == XFER_RESULT_SUCCESS);
 
   // hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) xfer->request.wIndex;
+  uint8_t const port_num = (uint8_t) xfer->setup->wIndex;
 
   // submit attach event
   hcd_event_t event =

src/host/usbh.c

@@ -109,6 +109,10 @@ typedef struct {
 
   tu_edpt_state_t ep_status[CFG_TUH_ENDPOINT_MAX][2];
 
+#if CFG_TUH_BARE
+
+#endif
+
 } usbh_device_t;
 
 //--------------------------------------------------------------------+
@@ -241,7 +245,11 @@ static uint8_t _usbh_ctrl_buf[CFG_TUH_ENUMERATION_BUFSIZE];
 // We will only execute control transfer one at a time.
 struct
 {
-  tuh_control_xfer_t xfer;
+  tusb_control_request_t request TU_ATTR_ALIGNED(4);
+  uint8_t* buffer;
+  tuh_control_xfer_cb_t complete_cb;
+  uintptr_t user_arg;
+
   uint8_t daddr;  // device address that is transferring
   volatile uint8_t stage;
 }_ctrl_xfer;
@@ -304,9 +312,7 @@ void osal_task_delay(uint32_t msec)
 static bool _get_descriptor(uint8_t daddr, uint8_t type, uint8_t index, uint16_t language_id, void* buffer, uint16_t len,
                             tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg)
 {
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -318,8 +324,12 @@ static bool _get_descriptor(uint8_t daddr, uint8_t type, uint8_t index, uint16_t
     .wValue   = tu_htole16( TU_U16(type, index) ),
     .wIndex   = tu_htole16(language_id),
     .wLength  = tu_htole16(len)
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = buffer,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -387,9 +397,7 @@ bool tuh_descriptor_get_hid_report(uint8_t daddr, uint8_t itf_num, uint8_t desc_
                                    tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg)
 {
   TU_LOG2("HID Get Report Descriptor\r\n");
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -401,8 +409,12 @@ bool tuh_descriptor_get_hid_report(uint8_t daddr, uint8_t itf_num, uint8_t desc_
     .wValue   = tu_htole16(TU_U16(desc_type, index)),
     .wIndex   = tu_htole16((uint16_t) itf_num),
     .wLength  = len
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = buffer,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -416,9 +428,7 @@ bool tuh_configuration_set(uint8_t daddr, uint8_t config_num,
 {
   TU_LOG2("Set Configuration = %d\r\n", config_num);
 
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -430,8 +440,12 @@ bool tuh_configuration_set(uint8_t daddr, uint8_t config_num,
     .wValue   = tu_htole16(config_num),
     .wIndex   = 0,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = complete_cb,
     .user_arg    = user_arg
@@ -895,16 +909,19 @@ bool tuh_control_xfer (uint8_t daddr, tuh_control_xfer_t const* xfer)
 
   const uint8_t rhport = usbh_get_rhport(daddr);
 
-  TU_LOG2("[%u:%u] %s: ", rhport, daddr, xfer->request.bRequest <= TUSB_REQ_SYNCH_FRAME ? tu_str_std_request[xfer->request.bRequest] : "Unknown Request");
+  TU_LOG2("[%u:%u] %s: ", rhport, daddr, xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME ? tu_str_std_request[xfer->setup->bRequest] : "Unknown Request");
-  TU_LOG2_VAR(&xfer->request);
+  TU_LOG2_VAR(&xfer->setup);
   TU_LOG2("\r\n");
 
   _ctrl_xfer.daddr       = daddr;
-  _ctrl_xfer.xfer = (*xfer);
+  _ctrl_xfer.request     = (*xfer->setup);
+  _ctrl_xfer.buffer      = xfer->buffer;
+  _ctrl_xfer.complete_cb = xfer->complete_cb;
+  _ctrl_xfer.user_arg    = xfer->user_arg;
 
   if (xfer->complete_cb)
   {
-    TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_ctrl_xfer.xfer.request) );
+    TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_ctrl_xfer.request) );
   }else
   {
     // user_arg must point to xfer_result_t to hold result
@@ -914,10 +931,10 @@ bool tuh_control_xfer (uint8_t daddr, tuh_control_xfer_t const* xfer)
     // change callback to internal blocking, and result as user argument
     volatile xfer_result_t* result = (volatile xfer_result_t*) xfer->user_arg;
 
-    _ctrl_xfer.xfer.complete_cb = _control_blocking_complete_cb;
+    _ctrl_xfer.complete_cb = _control_blocking_complete_cb;
     *result = XFER_RESULT_INVALID;
 
-    TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_ctrl_xfer.xfer.request) );
+    TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_ctrl_xfer.request) );
 
     while ((*result) == XFER_RESULT_INVALID)
     {
@@ -961,7 +978,16 @@ static void _xfer_complete(uint8_t dev_addr, xfer_result_t result)
   TU_LOG2("\r\n");
 
   // duplicate xfer since user can execute control transfer within callback
-  tuh_control_xfer_t const xfer_temp = _ctrl_xfer.xfer;
+  tusb_control_request_t const request = _ctrl_xfer.request;
+  tuh_control_xfer_t const xfer_temp =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
+    .actual_len  = 0,
+    .buffer      = _ctrl_xfer.buffer,
+    .complete_cb = _ctrl_xfer.complete_cb,
+    .user_arg    = _ctrl_xfer.user_arg
+  };
 
   usbh_lock();
   _ctrl_xfer.stage = CONTROL_STAGE_IDLE;
@@ -979,7 +1005,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result
   (void) xferred_bytes;
 
   const uint8_t rhport = usbh_get_rhport(dev_addr);
-  tusb_control_request_t const * request = &_ctrl_xfer.xfer.request;
+  tusb_control_request_t const * request = &_ctrl_xfer.request;
 
   if (XFER_RESULT_SUCCESS != result)
   {
@@ -996,7 +1022,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result
         {
           // DATA stage: initial data toggle is always 1
           set_control_xfer_stage(CONTROL_STAGE_DATA);
-          return hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.xfer.buffer, request->wLength);
+          return hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength);
         }
         __attribute__((fallthrough));
 
@@ -1004,7 +1030,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result
         if (request->wLength)
         {
           TU_LOG2("[%u:%u] Control data:\r\n", rhport, dev_addr);
-          TU_LOG2_MEM(_ctrl_xfer.xfer.buffer, request->wLength, 2);
+          TU_LOG2_MEM(_ctrl_xfer.buffer, request->wLength, 2);
         }
 
         // ACK stage: toggle is always 1
@@ -1190,7 +1216,7 @@ static bool process_enumeration(uint8_t dev_addr, tuh_control_xfer_t const * xfe
 
     case ENUM_GET_DEVICE_DESC:
     {
-      uint8_t const new_addr = (uint8_t) tu_le16toh(xfer->request.wValue);
+      uint8_t const new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue);
 
       usbh_device_t* new_dev = get_device(new_addr);
       TU_ASSERT(new_dev);
@@ -1320,6 +1346,12 @@ static bool enum_new_device(hcd_event_t* event)
   return true;
 }
 
+TU_ATTR_ALWAYS_INLINE
+static inline bool is_hub_addr(uint8_t daddr)
+{
+  return daddr > CFG_TUH_DEVICE_MAX;
+}
+
 static uint8_t get_new_address(bool is_hub)
 {
   uint8_t start;
@@ -1360,9 +1392,7 @@ static bool enum_request_set_addr(void)
   new_dev->connected = 1;
   new_dev->ep0_size  = desc_device->bMaxPacketSize0;
 
-  tuh_control_xfer_t const xfer =
+  tusb_control_request_t const request =
-  {
-    .request =
   {
     .bmRequestType_bit =
     {
@@ -1374,8 +1404,12 @@ static bool enum_request_set_addr(void)
     .wValue   = tu_htole16(new_addr),
     .wIndex   = 0,
     .wLength  = 0
-    },
+  };
 
+  tuh_control_xfer_t const xfer =
+  {
+    .ep_addr     = 0,
+    .setup       = &request,
     .buffer      = NULL,
     .complete_cb = process_enumeration,
     .user_arg    = ENUM_GET_DEVICE_DESC
@@ -1503,9 +1537,15 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num)
   {
     enum_full_complete();
 
+#if CFG_TUH_HUB
+    // skip device mount callback for hub
+    if ( !is_hub_addr(dev_addr) )
+#endif
+    {
       // Invoke callback if available
       if (tuh_mount_cb) tuh_mount_cb(dev_addr);
     }
+  }
 }
 
 static void enum_full_complete(void)

src/host/usbh.h

@@ -46,7 +46,10 @@ typedef bool (*tuh_control_xfer_cb_t)(uint8_t daddr, tuh_control_xfer_t const *
 
 struct tuh_control_xfer_s
 {
-  tusb_control_request_t request TU_ATTR_ALIGNED(4);
+  uint8_t ep_addr;
+  tusb_control_request_t const* setup;
+  uint32_t actual_len;
+
   uint8_t* buffer;
   tuh_control_xfer_cb_t complete_cb;
   uintptr_t user_arg;
@@ -104,14 +107,16 @@ static inline bool tuh_ready(uint8_t daddr)
   return tuh_mounted(daddr) && !tuh_suspended(daddr);
 }
 
+//--------------------------------------------------------------------+
+// Endpoint Asynchronous (non-blocking)
+//--------------------------------------------------------------------+
+
 // Carry out a control transfer
 // true on success, false if there is on-going control transfer or incorrect parameters
 // Blocking if complete callback is NULL, in this case 'user_arg' must contain xfer_result_t variable
-bool tuh_control_xfer (uint8_t daddr, tuh_control_xfer_t const* xfer);
+bool tuh_control_xfer(uint8_t daddr, tuh_control_xfer_t const* xfer);
 
-// Sync (blocking) version of tuh_control_xfer()
+//bool tuh_edpt_xfer(uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);
-// return transfer result
-uint8_t tuh_control_xfer_sync(uint8_t daddr, tuh_control_xfer_t const* xfer, uint32_t timeout_ms);
 
 // Set Configuration (control transfer)
 // config_num = 0 will un-configure device. Note: config_num = config_descriptor_index + 1
@@ -120,6 +125,14 @@ uint8_t tuh_control_xfer_sync(uint8_t daddr, tuh_control_xfer_t const* xfer, uin
 bool tuh_configuration_set(uint8_t daddr, uint8_t config_num,
                            tuh_control_xfer_cb_t complete_cb, uintptr_t user_arg);
 
+//--------------------------------------------------------------------+
+// Endpoint Synchronous (blocking)
+//--------------------------------------------------------------------+
+
+// Sync (blocking) version of tuh_control_xfer()
+// return transfer result
+uint8_t tuh_control_xfer_sync(uint8_t daddr, tuh_control_xfer_t const* xfer, uint32_t timeout_ms);
+
 //--------------------------------------------------------------------+
 // Descriptors Asynchronous (non-blocking)
 //--------------------------------------------------------------------+
@@ -201,10 +214,6 @@ uint8_t tuh_descriptor_get_product_string_sync(uint8_t daddr, uint16_t language_
 // return transfer result
 uint8_t tuh_descriptor_get_serial_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len, uint8_t timeout_ms);
 
-//--------------------------------------------------------------------+
-//
-//--------------------------------------------------------------------+
-
 #ifdef __cplusplus
  }
 #endif