Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-31 05:52:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1727 from HiFiPhile/bsp_412

Browse Source 
Add support for STM32L412.
This commit is contained in:
Ha Thach 2022-11-15 16:15:09 +07:00 committed by GitHub
commit 6c6b7ee2bf
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 383 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

184
hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld Normal file
View File

@ -0,0 +1,184 @@
/*
*****************************************************************************
**
** File : LinkerScript.ld
**
** Abstract : Linker script for STM32L412KBTx Device with
** 128KByte FLASH, 40KByte RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
**
** Distribution: The file is distributed as is, without any warranty
** of any kind.
**
** (c)Copyright Ac6.
** You may use this file as-is or modify it according to the needs of your
** project. Distribution of this file (unmodified or modified) is not
** permitted. Ac6 permit registered System Workbench for MCU users the
** rights to distribute the assembled, compiled & linked contents of this
** file as part of an application binary file, provided that it is built
** using the System Workbench for MCU toolchain.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20008000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 8K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(8);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(8);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(8);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(8);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(8);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(8);
} >FLASH
.ARM.extab :
{
. = ALIGN(8);
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(8);
} >FLASH
.ARM : {
. = ALIGN(8);
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
. = ALIGN(8);
} >FLASH
.preinit_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
} >FLASH
.init_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
} >FLASH
.fini_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
. = ALIGN(8);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(8);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(8);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

141
hw/bsp/stm32l4/boards/stm32l412nucleo/board.h Normal file
View File

@ -0,0 +1,141 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
#ifdef __cplusplus
extern "C" {
#endif
#define LED_PORT GPIOB
#define LED_PIN GPIO_PIN_3
#define LED_STATE_ON 1
// Not a real button
#define BUTTON_PORT GPIOB
#define BUTTON_PIN GPIO_PIN_0
#define BUTTON_STATE_ACTIVE 1
#define UART_DEV LPUART1
#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE
#define UART_GPIO_PORT GPIOA
#define UART_GPIO_AF GPIO_AF8_LPUART1
#define UART_TX_PIN GPIO_PIN_2
#define UART_RX_PIN GPIO_PIN_3
//--------------------------------------------------------------------+
// RCC Clock
//--------------------------------------------------------------------+
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (MSI)
* SYSCLK(Hz) = 80000000
* HCLK(Hz) = 80000000
* AHB Prescaler = 1
* APB1 Prescaler = 1
* APB2 Prescaler = 1
* MSI Frequency(Hz) = 8000000
* PLL_M = 1
* PLL_N = 10
* PLL_Q = 2
* PLL_R = 2
* VDD(V) = 3.3
* @param None
* @retval None
*/
static inline void board_clock_init(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_CRSInitTypeDef RCC_CRSInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
/** Configure the main internal regulator output voltage
*/
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = 1;
RCC_OscInitStruct.PLL.PLLN = 10;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
/** Enable the SYSCFG APB clock
*/
__HAL_RCC_CRS_CLK_ENABLE();
/** Configures CRS
*/
RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000);
RCC_CRSInitStruct.ErrorLimitValue = 34;
RCC_CRSInitStruct.HSI48CalibrationValue = 32;
HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
/* Select HSI48 output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
/* Select PLL output as UART clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
}
#ifdef __cplusplus
}
#endif
#endif /* BOARD_H_ */

10
hw/bsp/stm32l4/boards/stm32l412nucleo/board.mk Normal file
View File

@ -0,0 +1,10 @@
CFLAGS += \
-DSTM32L412xx \
# All source paths should be relative to the top level.
LD_FILE = $(BOARD_PATH)/STM32L412KBUx_FLASH.ld
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l412xx.s
# For flash-jlink target
JLINK_DEVICE = stm32l412kb

33
hw/bsp/stm32l4/family.c
View File

@ -33,7 +33,11 @@
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
#if defined(USB_OTG_FS)
void OTG_FS_IRQHandler(void)
#else
void USB_IRQHandler(void)
#endif
{
tud_int_handler(0);
}
@ -53,9 +57,15 @@ void board_init(void)
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
#if defined(GPIOE)
__HAL_RCC_GPIOE_CLK_ENABLE();
#endif
#if defined(GPIOF)
__HAL_RCC_GPIOF_CLK_ENABLE();
#endif
#if defined(GPIOG)
__HAL_RCC_GPIOG_CLK_ENABLE();
#endif
__HAL_RCC_GPIOH_CLK_ENABLE();
UART_CLK_EN();
@ -64,7 +74,11 @@ void board_init(void)
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
//NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#if defined(USB_OTG_FS)
NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#else
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
#endif
/* Enable USB power on Pwrctrl CR2 register */
@ -95,7 +109,10 @@ void board_init(void)
// IOSV bit MUST be set to access GPIO port G[2:15] */
__HAL_RCC_PWR_CLK_ENABLE();
#if defined(PWR_CR2_IOSV)
HAL_PWREx_EnableVddIO2();
#endif
// Uart
GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN;
@ -124,9 +141,14 @@ void board_init(void)
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
#if defined(USB_OTG_FS)
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
#else
GPIO_InitStruct.Alternate = GPIO_AF10_USB_FS;
#endif
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#if defined(USB_OTG_FS)
/* Configure VBUS Pin */
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@ -139,11 +161,16 @@ void board_init(void)
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#endif
/* Enable USB FS Clocks */
#if defined(USB_OTG_FS)
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
board_vbus_sense_init();
#else
__HAL_RCC_USB_CLK_ENABLE();
#endif
}
//--------------------------------------------------------------------+
@ -187,7 +214,7 @@ uint32_t board_millis(void)
void HardFault_Handler (void)
{
asm("bkpt");
asm("bkpt 0x10");
}
// Required by __libc_init_array in startup code if we are compiling using

1
hw/bsp/stm32l4/family.mk
View File

@ -22,6 +22,7 @@ CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align
#src/portable/st/synopsys/dcd_synopsys.c
SRC_C += \
src/portable/synopsys/dwc2/dcd_dwc2.c \
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \

16
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@ -109,9 +109,17 @@
#define STM32F1_FSDEV
#endif
#if defined(STM32L412xx) || defined(STM32L422xx) || \
defined(STM32L432xx) || defined(STM32L433xx) || \
defined(STM32L442xx) || defined(STM32L443xx) || \
defined(STM32L452xx) || defined(STM32L462xx)
#define STM32L4_FSDEV
#endif
#if CFG_TUD_ENABLED && \
( TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F3, OPT_MCU_STM32L0, OPT_MCU_STM32L1, OPT_MCU_STM32G4, OPT_MCU_STM32WB) || \
(TU_CHECK_MCU(OPT_MCU_STM32F1) && defined(STM32F1_FSDEV)) \
(TU_CHECK_MCU(OPT_MCU_STM32F1) && defined(STM32F1_FSDEV)) || \
(TU_CHECK_MCU(OPT_MCU_STM32L4) && defined(STM32L4_FSDEV)) \
)
// In order to reduce the dependance on HAL, we undefine this.
@ -302,7 +310,8 @@ void dcd_int_enable (uint8_t rhport)
// Member here forces write to RAM before allowing ISR to execute
__DSB();
__ISB();
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || \
CFG_TUSB_MCU == OPT_MCU_STM32L4
NVIC_EnableIRQ(USB_IRQn);
#elif CFG_TUSB_MCU == OPT_MCU_STM32L1
@ -350,7 +359,8 @@ void dcd_int_disable(uint8_t rhport)
{
(void)rhport;
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || \
CFG_TUSB_MCU == OPT_MCU_STM32L4
NVIC_DisableIRQ(USB_IRQn);
#elif CFG_TUSB_MCU == OPT_MCU_STM32L1
NVIC_DisableIRQ(USB_LP_IRQn);

4
src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h
View File

@ -98,6 +98,10 @@
#undef USB_PMAADDR
#define USB_PMAADDR USB1_PMAADDR
#elif CFG_TUSB_MCU == OPT_MCU_STM32L4
#include "stm32l4xx.h"
#define PMA_LENGTH (1024u)
#else
#error You are using an untested or unimplemented STM32 variant. Please update the driver.
// This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4