Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

increase version and update changelog

Browse Source
This commit is contained in:
hathach 2021-08-30 12:44:38 +07:00
parent bc4145fcb4
commit 6fadf530e0
4 changed files with 404 additions and 324 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.rst
View File

@ -40,14 +40,14 @@ The stack supports the following MCUs:
- **NXP:**
- iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
- Kinetis: KL25
- Kinetis: KL25, K32L2Bxx
- LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55
- **Raspberry Pi:** RP2040
- **Renesas:** RX63N, RX65N
- **Silabs:** EFM32GG12
- **Sony:** CXD56
- **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed
- **ST:** STM32 series: L0, L1, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed
- **TI:** MSP430
- **ValentyUSB:** eptri

191
docs/info/changelog.rst
View File

@ -2,7 +2,108 @@
Changelog
*********
0.10.1 (03-06-221)
0.11.0 (29-08-2021)
===================
- Add host/hid_controller example: only worked/tested with Sony PS4 DualShock controller
- Add device/hid_boot_interface example
- Add support for Renesas CCRX toolchain for RX mcu
Device Controller Driver (DCD)
------------------------------
- Add new DCD port for SAMx7x (E70, S70, V70, V71)
- Add new mcu K32L2Bxx
- Add new mcu GD32VF103
- Add new mcu STM32l151
- Add new mcu SAML21
- Add new mcu RX65n RX72n
- Fix NUC120/121/126 USBRAM can only be accessed in byte manner. Also improve set_address & disable sof
- Add Suspend/Resume handling for Renesas RX family.
- Fix DA1469x no VBUS startup
Synopsys
^^^^^^^^
- Fix Synopsys set address bug which could cause re-enumeration failed
- Fix for dcd_synopsys driver integer overflow in HS mode (issue #968)
nRF5x
^^^^^
- Add nRF5x suspend, resume and remote wakeup
- Fix nRF5x race condition with TASKS_EP0RCVOUT
RP2040
^^^^^^
- Add RP2040 suspend & resume support
- Implement double buffer for both host and device (#891). Howver device EPOUT is still single bufferred due to techinical issue with short packet
Host Controller Driver (HCD)
----------------------------
RP2040
^^^^^^
- Implement double bufferred to fix E4 errata and boost performance
- Lots of rp2040 update and enhancment
Device Stack
------------
USBD
^^^^
- Better support big endian mcu
- Add tuh_inited() and tud_inited(), will separte tusb_init/inited() to tud/tuh init/inited
- Add dcd_attr.h for defining common controller attribute such as max endpoints
Bluetooth
^^^^^^^^^
- Fix stridx error in descriptor template
DFU
^^^
- Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout
- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU
HID
^^^
- Fix newline usage keyboard (ENTER 0x28)
- Better support Hid Get/Set report
- Change max gamepad support from 16 to 32 buttons
MIDI
^^^^
- Fix midi available
- Fix midi data
- Fix an issue when calling midi API when not enumerated yet
UAC2
^^^^
- Fix bug and enhance of UAC2
Vendor
^^^^^^
- Fix vendor fifo deadlock in certain case
- Add tud_vendor_n_read_flush
Host Stack
----------
- Major update and rework most of host stack, still needs more improvement
- Lots of improvement and update in parsing configuration and control
- Rework and major update to HID driver. Will default to enable boot interface if available
- Sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB for better management and reduce SRAM usage
0.10.1 (03-06-2021)
===================
- rework rp2040 examples and CMake build, allow better integration with pico-sdk
@ -16,7 +117,6 @@ Host Controller Driver (HCD)
- Use hcd_frame_number() instead of micro frame
- Fix OHCI endpoint address and xferred_bytes in xfer complete event
0.10.0 (28-05-2021)
===================
@ -59,6 +159,7 @@ HID
- Fix keyboard report descriptor template
- Add more hid keys constant from 0x6B to 0xA4
- [Breaking] rename API
- HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE
- tud_hid_boot_mode() to tud_hid_get_protocol()
@ -67,6 +168,7 @@ HID
MIDI
- Fix MIDI buffer overflow issue
- [Breaking] rename API
- Rename tud_midi_read() to tud_midi_stream_read()
- Rename tud_midi_write() to tud_midi_stream_write()
@ -137,13 +239,16 @@ CDC
HID
- [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes
- tud_hid_descriptor_report_cb()
- tud_hid_get_report_cb()
- tud_hid_set_report_cb()
- tud_hid_boot_mode_cb()
- tud_hid_set_idle_cb()
- Add report complete callback tud_hid_report_complete_cb() API
- Add DPad/Hat support for HID Gamepad
- `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad
- Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum
- Add Gamepad to hid_composite / hid_composite_freertos example
@ -162,10 +267,13 @@ Host Controller Driver (HCD)
- Add rhport to hcd_init()
- Improve EHCI/OHCI driver abstraction
- Move echi/ohci files to portable/
- Rename hcd_lpc18_43 to hcd_transdimension
- Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr()
- Update NXP transdimention hcd_init() to reset controller to host mode
- Ported hcd to rt10xx
USB Host Driver (USBH)
@ -210,12 +318,16 @@ Device Controller Driver
- Added new device support for Raspberry Pi RP2040
- Added new device support for NXP Kinetis KL25ZXX
- Use dcd_event_bus_reset() with link speed to replace bus_signal
- ESP32-S2:
- Add bus suspend and wakeup support
- SAMD21:
- Fix (walkaround) samd21 setup_packet overflow by USB DMA
- STM32 Synopsys:
- Rework USB FIFO allocation scheme and allow RX FIFO size reduction
- Sony CXD56
- Update Update Spresense SDK to 2.0.2
- Fix dcd issues with setup packets
@ -234,13 +346,17 @@ USB Device
- CDC
- Allow to transmit data, even if the host does not support control line states i.e set DTR
- HID
- change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64
- MIDI
- Fix midi sysex sending bug
- MSC
- Invoke only scsi complete callback after status transaction is complete.
- Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error.
- USBTMC
- Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu
@ -281,6 +397,7 @@ Device Controller Driver
- Added new support for Espressif ESP32-S2
- Added new support for Dialog DA1469x
- Enhance STM32 Synopsys
- Support bus events disconnection/suspend/resume/wakeup
- Improve transfer performance with optimizing xfer and fifo size
- Support Highspeed port (OTG_HS) with both internal and external PHY
@ -289,17 +406,22 @@ Device Controller Driver
- Fix FIFO flush during stall
- Implement dcd_edpt_close() API
- Support F105, F107
- Enhance STM32 fsdev
- Improve dcd fifo allocation
- Fix ISTR race condition
- Support remap USB IRQ on supported MCUs
- Implement dcd_edpt_close() API
- Enhance NUC 505: enhance set configure behavior
- Enhance SAMD
- Fix race condition with setup packet
- Add SAMD11 option `OPT_MCU_SAMD11`
- Add SAME5x option `OPT_MCU_SAME5X`
- Fix SAMG control data toggle and stall race condition
- Enhance nRF
- Fix hanged when tud_task() is called within critical section (disabled interrupt)
- Fix disconnect bus event not submitted
@ -324,10 +446,12 @@ USB Device
- Add IAR compiler support
- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument
- Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()`
- Enhance class driver management
- `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver
- Add application implemented class driver via `usbd_app_driver_get_cb()`
- IAD is handled to assign driver id
- Added `tud_descriptor_device_qualifier_cb()` callback
- Optimize `tu_fifo` bulk write/read transfer
- Forward non-std control request to class driver
@ -338,20 +462,25 @@ USB Device
- USBNET: remove ACM-EEM due to lack of support from host
- USBTMC: fix descriptors when INT EP is disabled
- CDC:
- Send zero length packet for end of data when needed
- Add `tud_cdc_tx_complete_cb()` callback
- Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo
- MIDI:
- Add packet interface
- Add multiple jack descriptors
- Fix MIDI driver for sysex
- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request
- Rename some configure macro to make it clear that those are used directly for endpoint transfer
- CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
- CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE
- CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
- CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE
- HID:
- Fix gamepad template descriptor
- Add multiple HID interface API
@ -363,6 +492,7 @@ USB Host
- Rework USB host stack (still work in progress)
- Fix compile error with pipehandle
- Rework usbh control and enumeration as non-blocking
- Improve Hub, MSC, HID host driver
Examples
@ -371,9 +501,11 @@ Examples
- Add new hid_composite_freertos
- Add new dynamic_configuration to demonstrate how to switch configuration descriptors
- Add new hid_multiple_interface
- Enhance `net_lwip_webserver` example
- Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
- Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver
- Added new Audio example: audio_test uac2_headsest
New Boards
@ -430,61 +562,6 @@ Following examples are added:
- usbtmc
- webusb_serial
**Boards**
Following boards are added:
- adafruit_clue
- arduino_nano33_ble
- circuitplayground_bluefruit
- circuitplayground_express
- feather_m0_express
- feather_nrf52840_sense
- feather_stm32f405
- fomu
- itsybitsy_m0
- itsybitsy_m4
- lpcxpresso11u37
- lpcxpresso1549
- lpcxpresso51u68
- lpcxpresso54114
- lpcxpresso55s69
- mbed1768
- mimxrt1010_evk
- mimxrt1015_evk
- mimxrt1020_evk
- mimxrt1050_evkb
- mimxrt1060_evk
- mimxrt1064_evk
- msp_exp430f5529lp
- ngx4330
- nrf52840_mdk_dongle
- nutiny_nuc121s
- nutiny_nuc125s
- nutiny_nuc126v
- nutiny_sdk_nuc120
- nutiny_sdk_nuc505
- pca10059
- pca10100
- pyboardv11
- raytac_mdbt50q_rx
- samg55xplained
- seeeduino_xiao
- spresense
- stm32f070rbnucleo
- stm32f072disco
- stm32f103bluepill
- stm32f207nucleo
- stm32f401blackpill
- stm32f411blackpill
- stm32f411disco
- stm32f412disco
- stm32f767nucleo
- stm32h743nucleo
- stm32l0538disco
- stm32l476disco
- teensy_40
Changed
-------

5
repository.yml
View File

@ -6,7 +6,10 @@ repo.versions:
"0.7.0": "0.7.0"
"0.8.0": "0.8.0"
"0.9.0": "0.9.0"
"0.10.0": "0.10.0"
"0.10.1": "0.10.1"
"0.11.0": "0.11.0"
"0-dev": "0.0.0" # master
"0-latest": "0.9.0" # latest stable release
"0-latest": "0.11.0" # latest stable release

4
src/tusb_option.h
View File

@ -28,8 +28,8 @@
#define _TUSB_OPTION_H_
#define TUSB_VERSION_MAJOR 0
#define TUSB_VERSION_MINOR 10
#define TUSB_VERSION_REVISION 1
#define TUSB_VERSION_MINOR 11
#define TUSB_VERSION_REVISION 0
#define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)
//--------------------------------------------------------------------+