Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

Use TU_VERIFY_STATIC, use more uint instead of uint8_t/uint16_t. Create reg16_clear_bits function to reduce typec conversion warnings.

Browse Source
This commit is contained in:
Nathan Conrad 2019-09-11 09:45:48 -04:00
parent 784dc52b62
commit 7b93177890
1 changed files with 50 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

95
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@ -147,18 +147,12 @@
* Checks, structs, defines, function definitions, etc.
*/
#if ((MAX_EP_COUNT) > 8)
# error Only 8 endpoints supported on the hardware
#endif
TU_VERIFY_STATIC((MAX_EP_COUNT) <= STFSDEV_EP_COUNT,"Only 8 endpoints supported on the hardware");
#if (((DCD_STM32_BTABLE_BASE) + (DCD_STM32_BTABLE_LENGTH))>(PMA_LENGTH))
# error BTABLE does not fit in PMA RAM
#endif
TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) + (DCD_STM32_BTABLE_LENGTH))<=(PMA_LENGTH),
"BTABLE does not fit in PMA RAM");
#if (((DCD_STM32_BTABLE_BASE) % 8) != 0)
// per STM32F3 reference manual
#error BTABLE must be aligned to 8 bytes
#endif
TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) % 8) == 0, "BTABLE base must be aligned to 8 bytes");
// Max size of a USB FS packet is 64...
#define MAX_PACKET_SIZE 64
@ -177,17 +171,24 @@ static xfer_ctl_t xfer_status[MAX_EP_COUNT][2];
static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[6];
static uint8_t newDADDR; // Used to set the new device address during the CTR IRQ handler
static ushort newDADDR; // Used to set the new device address during the CTR IRQ handler
// EP Buffers assigned from end of memory location, to minimize their chance of crashing
// into the stack.
static uint16_t ep_buf_ptr;
static void dcd_handle_bus_reset(void);
static void dcd_write_packet_memory(uint16_t dst, const void *__restrict src, size_t wNBytes);
static void dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wNBytes);
static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, size_t wNBytes);
static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wNBytes);
static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix);
static uint16_t dcd_ep_ctr_handler(void);
// Using a function due to better type checks
// This seems better than having to do type casts everywhere else
static inline void reg16_clear_bits(__IO uint16_t *reg, uint16_t mask) {
*reg = (uint16_t)(*reg & ~mask);
}
void dcd_init (uint8_t rhport)
{
(void)rhport;
@ -197,19 +198,19 @@ void dcd_init (uint8_t rhport)
/* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL.
* Here, the RM is followed. */
for(uint32_t i = 0; i<200; i++) // should be a few us
for(uint i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
// Perform USB peripheral reset
USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN;
for(uint32_t i = 0; i<200; i++) // should be a few us
for(uint i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
USB->CNTR &= ~(USB_CNTR_PDWN);// Remove powerdown
reg16_clear_bits(&USB->CNTR, USB_CNTR_PDWN);// Remove powerdown
// Wait startup time, for F042 and F070, this is <= 1 us.
for(uint32_t i = 0; i<200; i++) // should be a few us
for(uint i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
@ -217,7 +218,7 @@ void dcd_init (uint8_t rhport)
USB->BTABLE = DCD_STM32_BTABLE_BASE;
USB->ISTR &= ~(USB_ISTR_ALL_EVENTS); // Clear pending interrupts
reg16_clear_bits(&USB->ISTR, USB_ISTR_ALL_EVENTS); // Clear pending interrupts
// Reset endpoints to disabled
for(uint i=0; i<STFSDEV_EP_COUNT; i++)
@ -228,7 +229,7 @@ void dcd_init (uint8_t rhport)
// Initialize the BTABLE for EP0 at this point (though setting up the EP0R is unneeded)
// This is actually not necessary, but helps debugging to start with a blank RAM area
for(uint16_t i=0;i<(DCD_STM32_BTABLE_LENGTH>>1); i++)
for(uint i=0;i<(DCD_STM32_BTABLE_LENGTH>>1); i++)
{
pma[PMA_STRIDE*(DCD_STM32_BTABLE_BASE + i)] = 0u;
}
@ -339,7 +340,7 @@ static void dcd_handle_bus_reset(void)
ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8*MAX_EP_COUNT; // 8 bytes per endpoint (two TX and two RX words, each)
dcd_edpt_open (0, &ep0OUT_desc);
dcd_edpt_open (0, &ep0IN_desc);
newDADDR = 0;
newDADDR = 0u;
USB->DADDR = USB_DADDR_EF; // Set enable flag, and leaving the device address as zero.
PCD_SET_EP_RX_STATUS(USB, 0, USB_EP_RX_VALID); // And start accepting SETUP on EP0
}
@ -379,8 +380,8 @@ static uint16_t dcd_ep_ctr_handler(void)
if((newDADDR != 0) && ( xfer->total_len == 0U))
{
// Delayed setting of the DADDR after the 0-len DATA packet acking the request is sent.
USB->DADDR &= ~USB_DADDR_ADD;
USB->DADDR |= newDADDR;
reg16_clear_bits(&USB->DADDR, USB_DADDR_ADD);
USB->DADDR |= (uint16_t)newDADDR; // leave the enable bit set
newDADDR = 0;
}
if(xfer->total_len == 0) // Probably a status message?
@ -431,14 +432,14 @@ static uint16_t dcd_ep_ctr_handler(void)
}
/* Process Control Data OUT status Packet*/
if(EPindex == 0 && xfer->total_len == 0)
if(EPindex == 0u && xfer->total_len == 0u)
{
PCD_CLEAR_EP_KIND(USB,0); // Good, so allow non-zero length packets now.
}
dcd_event_xfer_complete(0, EPindex, xfer->total_len, XFER_RESULT_SUCCESS, true);
PCD_SET_EP_RX_CNT(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE);
if(EPindex == 0 && xfer->total_len == 0)
if(EPindex == 0u && xfer->total_len == 0u)
{
PCD_SET_EP_RX_STATUS(USB, EPindex, USB_EP_RX_VALID);// Await next SETUP
}
@ -511,7 +512,7 @@ static uint16_t dcd_ep_ctr_handler(void)
return 0;
}
void dcd_fs_irqHandler(void) {
static void dcd_fs_irqHandler(void) {
uint16_t int_status = USB->ISTR;
// unused IRQs: (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_WKUP | USB_ISTR_SUSP | USB_ISTR_ESOF | USB_ISTR_L1REQ )
@ -521,20 +522,20 @@ void dcd_fs_irqHandler(void) {
/* servicing of the endpoint correct transfer interrupt */
/* clear of the CTR flag into the sub */
dcd_ep_ctr_handler();
USB->ISTR &= ~USB_ISTR_CTR;
reg16_clear_bits(&USB->ISTR, USB_ISTR_CTR);
}
if(int_status & USB_ISTR_RESET) {
// USBRST is start of reset.
USB->ISTR &= ~USB_ISTR_RESET;
reg16_clear_bits(&USB->ISTR, USB_ISTR_RESET);
dcd_handle_bus_reset();
dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
}
if (int_status & USB_ISTR_WKUP)
{
USB->CNTR &= ~USB_CNTR_LPMODE;
USB->CNTR &= ~USB_CNTR_FSUSP;
USB->ISTR &= ~USB_ISTR_WKUP;
reg16_clear_bits(&USB->CNTR, USB_CNTR_LPMODE);
reg16_clear_bits(&USB->CNTR, USB_CNTR_FSUSP);
reg16_clear_bits(&USB->ISTR, USB_ISTR_WKUP);
}
if (int_status & USB_ISTR_SUSP)
@ -544,11 +545,11 @@ void dcd_fs_irqHandler(void) {
USB->CNTR |= USB_CNTR_LPMODE;
/* clear of the ISTR bit must be done after setting of CNTR_FSUSP */
USB->ISTR &= ~USB_ISTR_SUSP;
reg16_clear_bits(&USB->ISTR, USB_ISTR_SUSP);
}
if(int_status & USB_ISTR_SOF) {
USB->ISTR &= ~USB_ISTR_SOF;
reg16_clear_bits(&USB->ISTR, USB_ISTR_SOF);
dcd_event_bus_signal(0, DCD_EVENT_SOF, true);
}
}
@ -718,19 +719,20 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
* @param wNBytes no. of bytes to be copied.
* @retval None
*/
static void dcd_write_packet_memory(uint16_t dst, const void *__restrict src, size_t wNBytes)
static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, size_t wNBytes)
{
uint32_t n = ((uint32_t)((uint32_t)wNBytes + 1U)) >> 1U;
uint32_t i;
uint i;
uint16_t temp1, temp2;
const uint8_t * srcVal;
#ifdef DEBUG
if(((dst%2) != 0) ||
(dst < DCD_STM32_BTABLE_BASE) ||
dst >= (DCD_STM32_BTABLE_BASE + DCD_STM32_BTABLE_LENGTH))
while(1) TU_BREAKPOINT();
# if (DCD_STM32_BTABLE_BASE > 0u)
TU_ASSERT(dst >= DCD_STM32_BTABLE_BASE);
# endif
TU_ASSERT(((dst%2) == 0) && (dst + wNBytes) <= (DCD_STM32_BTABLE_BASE + DCD_STM32_BTABLE_LENGTH));
#endif
// The GCC optimizer will combine access to 32-bit sizes if we let it. Force
// it volatile so that it won't do that.
__IO uint16_t *pdwVal;
@ -747,6 +749,7 @@ static void dcd_write_packet_memory(uint16_t dst, const void *__restrict src, si
pdwVal += PMA_STRIDE;
srcVal++;
}
return true;
}
/**
@ -755,22 +758,23 @@ static void dcd_write_packet_memory(uint16_t dst, const void *__restrict src, si
* @param wNBytes no. of bytes to be copied.
* @retval None
*/
static void dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wNBytes)
static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wNBytes)
{
uint32_t n = (uint32_t)wNBytes >> 1U;
uint32_t i;
uint n = (uint32_t)wNBytes >> 1U;
uint i;
// The GCC optimizer will combine access to 32-bit sizes if we let it. Force
// it volatile so that it won't do that.
__IO const uint16_t *pdwVal;
uint32_t temp;
#ifdef DEBUG
if((src%2) != 0 ||
(src < DCD_STM32_BTABLE_BASE) ||
src >= (DCD_STM32_BTABLE_BASE + DCD_STM32_BTABLE_LENGTH))
while(1) TU_BREAKPOINT();
# if (DCD_STM32_BTABLE_BASE > 0u)
TU_ASSERT(src >= DCD_STM32_BTABLE_BASE);
# endif
TU_ASSERT(((src%2) == 0) && (src + wNBytes) <= (DCD_STM32_BTABLE_BASE + DCD_STM32_BTABLE_LENGTH));
#endif
pdwVal = &pma[PMA_STRIDE*(src>>1)];
uint8_t *dstVal = (uint8_t*)dst;
@ -788,6 +792,7 @@ static void dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wN
pdwVal += PMA_STRIDE;
*dstVal++ = ((temp >> 0) & 0xFF);
}
return true;
}