Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #338 from hathach/remove-dcd-set-config

Browse Source 
lpc17xx move set configdevice into set address for removing dcd_set_config()
This commit is contained in:
Ha Thach 2020-04-17 14:35:11 +07:00 committed by GitHub
commit 823af6ba95
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 2 additions and 121 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/porting.md
View File

@ -78,10 +78,6 @@ Called when the device is given a new bus address.
If your peripheral automatically changes address during enumeration (like the nrf52) you may leave this empty and also no queue an event for the corresponding SETUP packet.
##### dcd_set_config
Called when the device received SET_CONFIG request, you can leave this empty if your peripheral does not require any specific action.
##### dcd_remote_wakeup
Called to remote wake up host when suspended (e.g hid keyboard)

3
src/device/dcd.h
View File

@ -100,9 +100,6 @@ void dcd_int_disable(uint8_t rhport);
// Receive Set Address request, mcu port must also include status IN response
void dcd_set_address(uint8_t rhport, uint8_t dev_addr);
// Receive Set Configure request
void dcd_set_config (uint8_t rhport, uint8_t config_num);
// Wake up host
void dcd_remote_wakeup(uint8_t rhport);

2
src/device/usbd.c
View File

@ -515,8 +515,6 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
{
uint8_t const cfg_num = (uint8_t) p_request->wValue;
dcd_set_config(rhport, cfg_num);
if ( !_usbd_dev.configured && cfg_num ) TU_ASSERT( process_set_config(rhport, cfg_num) );
_usbd_dev.configured = cfg_num ? 1 : 0;

7
src/portable/espressif/esp32s2/dcd_esp32s2.c
View File

@ -201,13 +201,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void)rhport;
(void)config_num;
// Nothing to do
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void)rhport;

7
src/portable/microchip/samd/dcd_samd.c
View File

@ -144,13 +144,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
USB->DEVICE.INTENSET.reg = USB_DEVICE_INTENSET_SUSPEND;
}
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Nothing to do
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

10
src/portable/microchip/samg/dcd_samg.c
View File

@ -167,16 +167,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
// do it at dcd_edpt0_status_complete()
}
// Receive Set Configure request
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Configured State
// UDP->UDP_GLB_STAT |= UDP_GLB_STAT_CONFG_Msk;
}
// Wake up host
void dcd_remote_wakeup (uint8_t rhport)
{

6
src/portable/nordic/nrf5x/dcd_nrf5x.c
View File

@ -216,12 +216,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
NRF_USBD->INTENSET = USBD_INTEN_USBEVENT_Msk;
}
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

6
src/portable/nuvoton/nuc120/dcd_nuc120.c
View File

@ -219,12 +219,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
assigned_address = dev_addr;
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

6
src/portable/nuvoton/nuc121/dcd_nuc121.c
View File

@ -225,12 +225,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
assigned_address = dev_addr;
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

6
src/portable/nuvoton/nuc505/dcd_nuc505.c
View File

@ -298,12 +298,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
assigned_address = dev_addr;
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

7
src/portable/nxp/lpc17_40/dcd_lpc17_40.c
View File

@ -203,12 +203,8 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
sie_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Also Set Configure Device to enable non-control endpoint response
sie_write(SIE_CMDCODE_CONFIGURE_DEVICE, 1, 1);
}
@ -283,6 +279,7 @@ static uint8_t control_ep_read(void * buffer, uint8_t len)
//--------------------------------------------------------------------+
// DCD Endpoint Port
//--------------------------------------------------------------------+
bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
{
(void) rhport;

6
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
View File

@ -198,12 +198,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
DCD_REGS->DEVCMDSTAT |= dev_addr;
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

7
src/portable/nxp/transdimension/dcd_transdimension.c
View File

@ -363,13 +363,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
dcd_reg->DEVICEADDR = (dev_addr << 25) | TU_BIT(24);
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// nothing to do
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

7
src/portable/sony/cxd56/dcd_cxd56.c
View File

@ -187,13 +187,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
(void) dev_addr;
}
// Receive Set Config request
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

8
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@ -317,14 +317,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
// do it at dcd_edpt0_status_complete()
}
// Receive Set Config request
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Nothing to do? Handled by stack.
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

7
src/portable/st/synopsys/dcd_synopsys.c
View File

@ -234,13 +234,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
}
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Nothing to do
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

7
src/portable/template/dcd_template.c
View File

@ -78,13 +78,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
(void) dev_addr;
}
// Receive Set Configure request
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
// Wake up host
void dcd_remote_wakeup (uint8_t rhport)
{

7
src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
View File

@ -192,13 +192,6 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
}
void dcd_set_config (uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
// Nothing to do
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;

8
src/portable/valentyusb/eptri/dcd_eptri.c
View File

@ -383,14 +383,6 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
usb_address_write(dev_addr);
}
// Called when the device received SET_CONFIG request, you can leave this
// empty if your peripheral does not require any specific action.
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
// Called to remote wake up host when suspended (e.g hid keyboard)
void dcd_remote_wakeup(uint8_t rhport)
{

2
test/test/device/msc/test_msc_device.c
View File

@ -241,8 +241,6 @@ void test_msc(void)
dcd_event_setup_received(rhport, (uint8_t*) &request_set_configuration, false);
dcd_set_config_Expect(rhport, 1);
// open endpoints
dcd_edpt_open_ExpectAndReturn(rhport, (tusb_desc_endpoint_t const *) desc_ep, true);
dcd_edpt_open_ExpectAndReturn(rhport, (tusb_desc_endpoint_t const *) tu_desc_next(desc_ep), true);