Split by compiler for testing

.github/workflows/build_aarch64.yml

@@ -18,7 +18,7 @@ jobs:
       matrix:
         family:
         # Alphabetical order
-        - 'raspberrypi4'
+        - 'broadcom_64bit'
     steps:
     - name: Setup Python
       uses: actions/setup-python@v2

.github/workflows/build_arm.yml

@@ -39,6 +39,7 @@ jobs:
       matrix:
         family:
         # Alphabetical order
+        - 'broadcom_32bit'
         - 'imxrt'
         - 'lpc15'
         - 'lpc18'
@@ -114,7 +115,7 @@ jobs:
         done
 
   # ---------------------------------------
-  # Build all no-family (opharned) boards
+  # Build all no-family (orphaned) boards
   # ---------------------------------------
   build-board:
     runs-on: ubuntu-latest

hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk

@@ -2,6 +2,4 @@ CFLAGS += -mcpu=arm1176jzf-s \
           -DBCM_VERSION=2835 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2835
 
-CROSS_COMPILE = arm-none-eabi-
-
 SUFFIX = 

hw/bsp/broadcom_32bit/family.mk

@@ -12,6 +12,8 @@ CFLAGS += \
 	-mgeneral-regs-only \
 	-std=c17
 
+CROSS_COMPILE = arm-none-eabi-
+
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=cast-qual
 

hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk

@@ -1,9 +1,3 @@
 CFLAGS += -mcpu=cortex-a72 \
           -DBCM_VERSION=2711 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2711
-
-CROSS_COMPILE = aarch64-none-elf-
-
-SUFFIX = 8
-
-INC += $(TOP)/lib/CMSIS_5/CMSIS/Core_A/Include

hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk

@@ -1,9 +1,3 @@
 CFLAGS += -mcpu=cortex-a53 \
           -DBCM_VERSION=2837 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2837
-
-CROSS_COMPILE = aarch64-none-elf-
-
-SUFFIX = 8
-
-INC += $(TOP)/lib/CMSIS_5/CMSIS/Core_A/Include

hw/bsp/broadcom_64bit/family.c

@@ -0,0 +1,156 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "bsp/board.h"
+#include "board.h"
+
+#include "broadcom/cpu.h"
+#include "broadcom/gpio.h"
+#include "broadcom/interrupts.h"
+#include "broadcom/mmu.h"
+#include "broadcom/caches.h"
+#include "broadcom/vcmailbox.h"
+
+// LED
+#define LED_PIN               18
+#define LED_STATE_ON          1
+
+// UART TX
+#define UART_TX_PIN           14
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+void board_init(void)
+{
+  setup_mmu_flat_map();
+  init_caches();
+
+  // LED
+  gpio_set_function(LED_PIN, GPIO_FUNCTION_OUTPUT);
+  gpio_set_pull(LED_PIN, BP_PULL_NONE);
+  board_led_write(true);
+
+  // Uart
+  COMPLETE_MEMORY_READS;
+  AUX->ENABLES_b.UART_1 = true;
+
+  UART1->IER = 0;
+  UART1->CNTL = 0;
+  UART1->LCR_b.DATA_SIZE = UART1_LCR_DATA_SIZE_MODE_8BIT;
+  UART1->MCR = 0;
+  UART1->IER = 0;
+
+  uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+  UART1->BAUD = ((source_clock / (115200 * 8)) - 1);
+  UART1->CNTL |= UART1_CNTL_TX_ENABLE_Msk;
+  COMPLETE_MEMORY_READS;
+
+  gpio_set_function(UART_TX_PIN, GPIO_FUNCTION_ALT5);
+
+  // Turn on USB peripheral.
+  vcmailbox_set_power_state(VCMAILBOX_DEVICE_USB_HCD, true);
+
+  // Timer 1/1024 second tick
+  SYSTMR->CS_b.M1 = 1;
+  SYSTMR->C1 = SYSTMR->CLO + 977;
+  BP_EnableIRQ(TIMER_1_IRQn);
+
+  BP_SetPriority(USB_IRQn, 0x00);
+  BP_ClearPendingIRQ(USB_IRQn);
+  BP_EnableIRQ(USB_IRQn);
+  BP_EnableIRQs();
+}
+
+void board_led_write(bool state)
+{
+  gpio_set_value(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+}
+
+uint32_t board_button_read(void)
+{
+  return 0;
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+  for (int i = 0; i < len; i++) {
+    const char* cbuf = buf;
+    while (!UART1->STAT_b.TX_READY) {}
+    if (cbuf[i] == '\n') {
+      UART1->IO = '\r';
+      while (!UART1->STAT_b.TX_READY) {}
+    }
+    UART1->IO = cbuf[i];
+  }
+  return len;
+}
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+
+void TIMER_1_IRQHandler(void)
+{
+  system_ticks++;
+  SYSTMR->C1 += 977;
+  SYSTMR->CS_b.M1 = 1;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
+
+void HardFault_Handler (void)
+{
+  // asm("bkpt");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void)
+{
+
+}

hw/bsp/broadcom_64bit/family.mk

@@ -0,0 +1,46 @@
+MCU_DIR = hw/mcu/broadcom
+DEPS_SUBMODULES += $(MCU_DIR)
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CFLAGS += \
+	-Wall \
+	-O0 \
+	-ffreestanding \
+	-nostdlib \
+	-nostartfiles \
+	-mgeneral-regs-only \
+	-std=c17
+
+CROSS_COMPILE = aarch64-none-elf-
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-error=cast-qual
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	$(MCU_DIR)/broadcom/gen/interrupt_handlers.c \
+	$(MCU_DIR)/broadcom/gpio.c \
+	$(MCU_DIR)/broadcom/interrupts.c \
+	$(MCU_DIR)/broadcom/mmu.c \
+	$(MCU_DIR)/broadcom/caches.c \
+	$(MCU_DIR)/broadcom/vcmailbox.c
+
+SKIP_NANOLIB = 1
+
+LD_FILE = $(MCU_DIR)/broadcom/link8.ld
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(MCU_DIR) \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core_A/Include
+
+SRC_S += $(MCU_DIR)/broadcom/boot8.S
+
+$(BUILD)/kernel8.img: $(BUILD)/$(PROJECT).elf
+	$(OBJCOPY) -O binary $^ $@
+
+# Copy to kernel to netboot drive or SD card
+# Change destinaation to fit your need
+flash: $(BUILD)/kernel8.img
+	@$(CP) $< /home/$(USER)/Documents/code/pi_tinyusb/boot_cpy