Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-31 05:52:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

clean up

Browse Source
This commit is contained in:
hathach 2019-03-22 14:55:00 +07:00
parent a2a267ddfa
commit 8b7c4ade71
No known key found for this signature in database
GPG Key ID: 2FA891220FBFD581
2 changed files with 5 additions and 108 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
examples/device/cdc_msc_hid_mynewt/readme.md
View File

@ -1 +1 @@
Please check out this repo https://github.com/hathach/mynewt-tinyusb-exmaple For mynewt example
Please check out this repo https://github.com/hathach/mynewt-tinyusb-example For mynewt example

111
hw/bsp/pca10056/board_pca10056.c
View File

@ -68,16 +68,9 @@ uint32_t tusb_hal_millis(void)
/*------------------------------------------------------------------*/
/* BOARD API
*------------------------------------------------------------------*/
enum {
QSPI_CMD_RSTEN = 0x66,
QSPI_CMD_RST = 0x99,
QSPI_CMD_WRSR = 0x01,
QSPI_CMD_READID = 0x90
};
/* tinyusb function that handles power event (detected, ready, removed)
* We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
*/
// tinyusb function that handles power event (detected, ready, removed)
// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
extern void tusb_hal_nrf_power_event(uint32_t event);
void board_init(void)
@ -98,79 +91,6 @@ void board_init(void)
SysTick_Config(SystemCoreClock/1000);
#endif
// 64 Mbit qspi flash
#if 0 // def BOARD_MSC_FLASH_QSPI
nrfx_qspi_config_t qspi_cfg = {
.xip_offset = 0,
.pins = {
.sck_pin = 19,
.csn_pin = 17,
.io0_pin = 20,
.io1_pin = 21,
.io2_pin = 22,
.io3_pin = 23,
},
.prot_if = {
.readoc = NRF_QSPI_READOC_READ4IO,
.writeoc = NRF_QSPI_WRITEOC_PP4IO,
.addrmode = NRF_QSPI_ADDRMODE_24BIT,
.dpmconfig = false, // deep power down
},
.phy_if = {
.sck_freq = NRF_QSPI_FREQ_32MDIV1,
.sck_delay = 1,
.spi_mode = NRF_QSPI_MODE_0,
.dpmen = false
},
.irq_priority = 7,
};
// NULL callback for blocking API
nrfx_qspi_init(&qspi_cfg, NULL, NULL);
nrf_qspi_cinstr_conf_t cinstr_cfg = {
.opcode = 0,
.length = 0,
.io2_level = true,
.io3_level = true,
.wipwait = false,
.wren = false
};
// Send reset enable
cinstr_cfg.opcode = QSPI_CMD_RSTEN;
cinstr_cfg.length = NRF_QSPI_CINSTR_LEN_1B;
nrfx_qspi_cinstr_xfer(&cinstr_cfg, NULL, NULL);
// Send reset command
cinstr_cfg.opcode = QSPI_CMD_RST;
cinstr_cfg.length = NRF_QSPI_CINSTR_LEN_1B;
nrfx_qspi_cinstr_xfer(&cinstr_cfg, NULL, NULL);
NRFX_DELAY_US(100); // wait for flash reset
// Send (Read ID + 3 dummy bytes) + Receive 2 bytes of Manufacture + Device ID
uint8_t dummy[6] = { 0 };
uint8_t id_resp[6] = { 0 };
cinstr_cfg.opcode = QSPI_CMD_READID;
cinstr_cfg.length = 6;
// Bug with -nrf_qspi_cinstrdata_get() didn't combine data.
// https://devzone.nordicsemi.com/f/nordic-q-a/38540/bug-nrf_qspi_cinstrdata_get-didn-t-collect-data-from-both-cinstrdat1-and-cinstrdat0
nrfx_qspi_cinstr_xfer(&cinstr_cfg, dummy, id_resp);
// Due to the bug, we collect data manually
uint8_t dev_id = (uint8_t) NRF_QSPI->CINSTRDAT1;
uint8_t mfgr_id = (uint8_t) ( NRF_QSPI->CINSTRDAT0 >> 24 );
// Switch to quad mode
uint16_t sr_quad_en = 0x40;
cinstr_cfg.opcode = QSPI_CMD_WRSR;
cinstr_cfg.length = 3;
cinstr_cfg.wipwait = cinstr_cfg.wren = true;
nrfx_qspi_cinstr_xfer(&cinstr_cfg, &sr_quad_en, NULL);
#endif
NVIC_SetPriority(USBD_IRQn, 2);
// USB power may already be ready at this time -> no event generated
@ -178,23 +98,6 @@ void board_init(void)
uint32_t usb_reg;
#ifdef SOFTDEVICE_PRESENT
// Enable to test enable SD before USB scenario
#if 1
extern void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info);
nrf_clock_lf_cfg_t clock_cfg =
{
// LFXO
.source = NRF_CLOCK_LF_SRC_XTAL,
.rc_ctiv = 0,
.rc_temp_ctiv = 0,
.accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM
};
sd_softdevice_enable(&clock_cfg, nrf_error_cb);
NVIC_EnableIRQ(SD_EVT_IRQn);
#endif
uint8_t sd_en = false;
sd_softdevice_is_enabled(&sd_en);
@ -220,13 +123,8 @@ void board_init(void)
usb_reg = NRF_POWER->USBREGSTATUS;
}
if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) {
tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
}
if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) {
tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
}
if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
}
void board_led_control(bool state)
@ -262,7 +160,6 @@ int board_uart_write(void const * buf, int len)
}
#ifdef SOFTDEVICE_PRESENT
// process SOC event from SD
uint32_t proc_soc(void)
{