mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-31 05:52:55 +08:00
valentyusb: rename from foosn
While Fomu is produced by Foosn, the actual name of the hardware block is `valentyusb`. Rename the module to match that. Signed-off-by: Sean Cross <sean@xobs.io>
This commit is contained in:
Sean Cross
parent
e05e9801e4
commit
8c5f02960b
@ -2,7 +2,7 @@ CFLAGS += \
|
||||
-march=rv32i \
|
||||
-mabi=ilp32 \
|
||||
-nostdlib \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_FOMU_EPTRI
|
||||
-DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI
|
||||
|
||||
MCU_DIR = hw/mcu/fomu
|
||||
BSP_DIR = hw/bsp/fomu
|
||||
@ -21,8 +21,8 @@ INC += \
|
||||
$(TOP)/$(BSP_DIR)/include
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = foosn
|
||||
CHIP_FAMILY = fomu
|
||||
VENDOR = valentyusb
|
||||
CHIP_FAMILY = eptri
|
||||
|
||||
# flash using dfu-util
|
||||
flash: $(BUILD)/$(BOARD)-firmware.dfu
|
||||
|
||||
@ -1,151 +0,0 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef _TUSB_DCD_FOMU_H_
|
||||
#define _TUSB_DCD_FOMU_H_
|
||||
|
||||
#include "common/tusb_common.h"
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// //--------------------------------------------------------------------+
|
||||
// // Register Interface
|
||||
// //--------------------------------------------------------------------+
|
||||
|
||||
// //------------- USB Interrupt USBIntSt -------------//
|
||||
// //enum {
|
||||
// // DCD_USB_REQ_LOW_PRIO_MASK = TU_BIT(0),
|
||||
// // DCD_USB_REQ_HIGH_PRIO_MASK = TU_BIT(1),
|
||||
// // DCD_USB_REQ_DMA_MASK = TU_BIT(2),
|
||||
// // DCD_USB_REQ_NEED_CLOCK_MASK = TU_BIT(8),
|
||||
// // DCD_USB_REQ_ENABLE_MASK = TU_BIT(31)
|
||||
// //};
|
||||
|
||||
// //------------- Device Interrupt USBDevInt -------------//
|
||||
// enum {
|
||||
// DEV_INT_FRAME_MASK = TU_BIT(0),
|
||||
// DEV_INT_ENDPOINT_FAST_MASK = TU_BIT(1),
|
||||
// DEV_INT_ENDPOINT_SLOW_MASK = TU_BIT(2),
|
||||
// DEV_INT_DEVICE_STATUS_MASK = TU_BIT(3),
|
||||
// DEV_INT_COMMAND_CODE_EMPTY_MASK = TU_BIT(4),
|
||||
// DEV_INT_COMMAND_DATA_FULL_MASK = TU_BIT(5),
|
||||
// DEV_INT_RX_ENDPOINT_PACKET_MASK = TU_BIT(6),
|
||||
// DEV_INT_TX_ENDPOINT_PACKET_MASK = TU_BIT(7),
|
||||
// DEV_INT_ENDPOINT_REALIZED_MASK = TU_BIT(8),
|
||||
// DEV_INT_ERROR_MASK = TU_BIT(9)
|
||||
// };
|
||||
|
||||
// //------------- DMA Interrupt USBDMAInt-------------//
|
||||
// enum {
|
||||
// DMA_INT_END_OF_XFER_MASK = TU_BIT(0),
|
||||
// DMA_INT_NEW_DD_REQUEST_MASK = TU_BIT(1),
|
||||
// DMA_INT_ERROR_MASK = TU_BIT(2)
|
||||
// };
|
||||
|
||||
// //------------- USBCtrl -------------//
|
||||
// enum {
|
||||
// USBCTRL_READ_ENABLE_MASK = TU_BIT(0),
|
||||
// USBCTRL_WRITE_ENABLE_MASK = TU_BIT(1),
|
||||
// };
|
||||
|
||||
// //------------- USBRxPLen -------------//
|
||||
// enum {
|
||||
// USBRXPLEN_PACKET_LENGTH_MASK = (TU_BIT(10)-1),
|
||||
// USBRXPLEN_DATA_VALID_MASK = TU_BIT(10),
|
||||
// USBRXPLEN_PACKET_READY_MASK = TU_BIT(11),
|
||||
// };
|
||||
|
||||
// //------------- SIE Command Code -------------//
|
||||
// typedef enum
|
||||
// {
|
||||
// SIE_CMDPHASE_WRITE = 1,
|
||||
// SIE_CMDPHASE_READ = 2,
|
||||
// SIE_CMDPHASE_COMMAND = 5
|
||||
// } sie_cmdphase_t;
|
||||
|
||||
// enum {
|
||||
// // device commands
|
||||
// SIE_CMDCODE_SET_ADDRESS = 0xd0,
|
||||
// SIE_CMDCODE_CONFIGURE_DEVICE = 0xd8,
|
||||
// SIE_CMDCODE_SET_MODE = 0xf3,
|
||||
// SIE_CMDCODE_READ_FRAME_NUMBER = 0xf5,
|
||||
// SIE_CMDCODE_READ_TEST_REGISTER = 0xfd,
|
||||
// SIE_CMDCODE_DEVICE_STATUS = 0xfe,
|
||||
// SIE_CMDCODE_GET_ERROR = 0xff,
|
||||
// SIE_CMDCODE_READ_ERROR_STATUS = 0xfb,
|
||||
|
||||
// // endpoint commands
|
||||
// SIE_CMDCODE_ENDPOINT_SELECT = 0x00, // + endpoint index
|
||||
// SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT = 0x40, // + endpoint index, should use USBEpIntClr instead
|
||||
// SIE_CMDCODE_ENDPOINT_SET_STATUS = 0x40, // + endpoint index
|
||||
// SIE_CMDCODE_BUFFER_CLEAR = 0xf2,
|
||||
// SIE_CMDCODE_BUFFER_VALIDATE = 0xfa
|
||||
// };
|
||||
|
||||
// //------------- SIE Device Status (get/set from SIE_CMDCODE_DEVICE_STATUS) -------------//
|
||||
// enum {
|
||||
// SIE_DEV_STATUS_CONNECT_STATUS_MASK = TU_BIT(0),
|
||||
// SIE_DEV_STATUS_CONNECT_CHANGE_MASK = TU_BIT(1),
|
||||
// SIE_DEV_STATUS_SUSPEND_MASK = TU_BIT(2),
|
||||
// SIE_DEV_STATUS_SUSPEND_CHANGE_MASK = TU_BIT(3),
|
||||
// SIE_DEV_STATUS_RESET_MASK = TU_BIT(4)
|
||||
// };
|
||||
|
||||
// //------------- SIE Select Endpoint Command -------------//
|
||||
// enum {
|
||||
// SIE_SELECT_ENDPOINT_FULL_EMPTY_MASK = TU_BIT(0), // 0: empty, 1 full. IN endpoint checks empty, OUT endpoint check full
|
||||
// SIE_SELECT_ENDPOINT_STALL_MASK = TU_BIT(1),
|
||||
// SIE_SELECT_ENDPOINT_SETUP_RECEIVED_MASK = TU_BIT(2), // clear by SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT
|
||||
// SIE_SELECT_ENDPOINT_PACKET_OVERWRITTEN_MASK = TU_BIT(3), // previous packet is overwritten by a SETUP packet
|
||||
// SIE_SELECT_ENDPOINT_NAK_MASK = TU_BIT(4), // last packet response is NAK (auto clear by an ACK)
|
||||
// SIE_SELECT_ENDPOINT_BUFFER1_FULL_MASK = TU_BIT(5),
|
||||
// SIE_SELECT_ENDPOINT_BUFFER2_FULL_MASK = TU_BIT(6)
|
||||
// };
|
||||
|
||||
// typedef enum
|
||||
// {
|
||||
// SIE_SET_ENDPOINT_STALLED_MASK = TU_BIT(0),
|
||||
// SIE_SET_ENDPOINT_DISABLED_MASK = TU_BIT(5),
|
||||
// SIE_SET_ENDPOINT_RATE_FEEDBACK_MASK = TU_BIT(6),
|
||||
// SIE_SET_ENDPOINT_CONDITION_STALLED_MASK = TU_BIT(7),
|
||||
// }sie_endpoint_set_status_mask_t;
|
||||
|
||||
// //------------- DMA Descriptor Status -------------//
|
||||
// enum {
|
||||
// DD_STATUS_NOT_SERVICED = 0,
|
||||
// DD_STATUS_BEING_SERVICED,
|
||||
// DD_STATUS_NORMAL,
|
||||
// DD_STATUS_DATA_UNDERUN, // short packet
|
||||
// DD_STATUS_DATA_OVERRUN,
|
||||
// DD_STATUS_SYSTEM_ERROR
|
||||
// };
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _TUSB_DCD_FOMU_H_ */
|
||||
@ -34,10 +34,10 @@
|
||||
|
||||
#include "tusb_option.h"
|
||||
|
||||
#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_FOMU_EPTRI)
|
||||
#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI)
|
||||
|
||||
#include "device/dcd.h"
|
||||
#include "dcd_fomu.h"
|
||||
#include "dcd_eptri.h"
|
||||
#include "csr.h"
|
||||
#include "irq.h"
|
||||
void fomu_error(uint32_t line);
|
||||
39
src/portable/valentyusb/eptri/dcd_eptri.h
Normal file
39
src/portable/valentyusb/eptri/dcd_eptri.h
Normal file
@ -0,0 +1,39 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef _TUSB_DCD_VALENTYUSB_EPTRI_H_
|
||||
#define _TUSB_DCD_VALENTYUSB_EPTRI_H_
|
||||
|
||||
#include "common/tusb_common.h"
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _TUSB_DCD_VALENTYUSB_EPTRI_H_ */
|
||||
@ -26,7 +26,7 @@
|
||||
|
||||
#include "common/tusb_common.h"
|
||||
|
||||
#if (CFG_TUSB_MCU == OPT_MCU_FOMU_EPTRI)
|
||||
#if (CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI)
|
||||
|
||||
// No HAL-specific stuff here!
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user