Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

move irq for stm32 fsdev

Browse Source
This commit is contained in:
hathach 2020-04-08 16:26:14 +07:00
parent fc9170b2c1
commit 9014ca5528
7 changed files with 93 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
hw/bsp/adafruit_clue/adafruit_clue.c
View File

@ -43,10 +43,9 @@ void USBD_IRQHandler(void)
tud_irq_handler(0);
}
/*------------------------------------------------------------------*/
/* MACRO TYPEDEF CONSTANT ENUM
*------------------------------------------------------------------*/
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define _PINNUM(port, pin) ((port)*32 + (pin))
#define LED_PIN _PINNUM(1, 1)

14
hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c
View File

@ -25,9 +25,19 @@
*/
#include "../board.h"
#include "stm32f0xx_hal.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
tud_irq_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOA
#define LED_PIN GPIO_PIN_5
#define LED_STATE_ON 1
@ -56,8 +66,6 @@ static void all_rcc_clk_enable(void)
void board_init(void)
{
/* Configure the system clock to 48 MHz */
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;

12
hw/bsp/stm32f072disco/stm32f072disco.c
View File

@ -25,9 +25,19 @@
*/
#include "../board.h"
#include "stm32f0xx_hal.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
tud_irq_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOC
#define LED_PIN GPIO_PIN_6
#define LED_STATE_ON 1

22
hw/bsp/stm32f103bluepill/stm32f103bluepill.c
View File

@ -25,9 +25,29 @@
*/
#include "../board.h"
#include "stm32f1xx_hal.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_HP_IRQHandler(void)
{
tud_irq_handler(0);
}
void USB_LP_IRQHandler(void)
{
tud_irq_handler(0);
}
void USBWakeUp_IRQHandler(void)
{
tud_irq_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOC
#define LED_PIN GPIO_PIN_13
#define LED_STATE_ON 0

34
hw/bsp/stm32f303disco/stm32f303disco.c
View File

@ -25,9 +25,41 @@
*/
#include "../board.h"
#include "stm32f3xx_hal.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
// USB defaults to using interrupts 19, 20, and 42 (based on SYSCFG_CFGR1.USB_IT_RMP)
// FIXME: Do all three need to be handled, or just the LP one?
// USB high-priority interrupt (Channel 19): Triggered only by a correct
// transfer event for isochronous and double-buffer bulk transfer to reach
// the highest possible transfer rate.
void USB_HP_CAN_TX_IRQHandler(void)
{
tud_irq_handler(0);
}
// USB low-priority interrupt (Channel 20): Triggered by all USB events
// (Correct transfer, USB reset, etc.). The firmware has to check the
// interrupt source before serving the interrupt.
void USB_LP_CAN_RX0_IRQHandler(void)
{
tud_irq_handler(0);
}
// USB wakeup interrupt (Channel 42): Triggered by the wakeup event from the USB
// Suspend mode.
void USBWakeUp_IRQHandler(void)
{
tud_irq_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOE
#define LED_PIN GPIO_PIN_9
#define LED_STATE_ON 1

12
hw/bsp/stm32l0538disco/stm32l0538disco.c
View File

@ -25,9 +25,19 @@
*/
#include "../board.h"
#include "stm32l0xx_hal.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
tud_irq_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOA
#define LED_PIN GPIO_PIN_5
#define LED_STATE_ON 1

56
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@ -489,7 +489,9 @@ static void dcd_ep_ctr_handler(void)
}
}
static void dcd_fs_irqHandler(void) {
void dcd_irq_handler(uint8_t rhport) {
(void) rhport;
uint32_t int_status = USB->ISTR;
//const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP
@ -804,57 +806,5 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wN
return true;
}
// Interrupt handlers
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0
void USB_IRQHandler(void)
{
dcd_fs_irqHandler();
}
#elif CFG_TUSB_MCU == OPT_MCU_STM32F1
void USB_HP_IRQHandler(void)
{
dcd_fs_irqHandler();
}
void USB_LP_IRQHandler(void)
{
dcd_fs_irqHandler();
}
void USBWakeUp_IRQHandler(void)
{
dcd_fs_irqHandler();
}
#elif (CFG_TUSB_MCU) == (OPT_MCU_STM32F3)
// USB defaults to using interrupts 19, 20, and 42 (based on SYSCFG_CFGR1.USB_IT_RMP)
// FIXME: Do all three need to be handled, or just the LP one?
// USB high-priority interrupt (Channel 19): Triggered only by a correct
// transfer event for isochronous and double-buffer bulk transfer to reach
// the highest possible transfer rate.
void USB_HP_CAN_TX_IRQHandler(void)
{
dcd_fs_irqHandler();
}
// USB low-priority interrupt (Channel 20): Triggered by all USB events
// (Correct transfer, USB reset, etc.). The firmware has to check the
// interrupt source before serving the interrupt.
void USB_LP_CAN_RX0_IRQHandler(void)
{
dcd_fs_irqHandler();
}
// USB wakeup interrupt (Channel 42): Triggered by the wakeup event from the USB
// Suspend mode.
void USBWakeUp_IRQHandler(void)
{
dcd_fs_irqHandler();
}
#else
#error Which IRQ handler do you need?
#endif
#endif