Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

add cmake for lpc11

Browse Source
This commit is contained in:
hathach 2024-05-02 17:54:44 +07:00
parent 4b537a4f8c
commit c717e52ab2
No known key found for this signature in database
GPG Key ID: 26FAB84F615C3C52
13 changed files with 482 additions and 258 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
examples/device/audio_4_channel_mic_freertos/skip.txt
View File

@ -10,5 +10,6 @@ mcu:SAMX7X
mcu:VALENTYUSB_EPTRI
mcu:RAXXX
mcu:STM32L0
board:lpcxpresso11u37
family:broadcom_32bit
family:broadcom_64bit

2
hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h
View File

@ -147,7 +147,7 @@
//--------------------------------------------------------------------+
// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
#define configPRIO_BITS 4
#define configPRIO_BITS 2
/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1)

178
hw/bsp/lpc11/FreeRTOSConfig/FreeRTOSConfig.h Normal file
View File

@ -0,0 +1,178 @@
/*
* FreeRTOS Kernel V10.0.0
* Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software. If you wish to use our Amazon
* FreeRTOS name, please do so in a fair use way that does not cause confusion.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H
/*-----------------------------------------------------------
* Application specific definitions.
*
* These definitions should be adjusted for your particular hardware and
* application requirements.
*
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
*
* See http://www.freertos.org/a00110.html.
*----------------------------------------------------------*/
// skip if included from IAR assembler
#ifndef __IASMARM__
#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif
#include "chip.h"
#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif
#endif
/* Cortex M23/M33 port configuration. */
#define configENABLE_MPU 0
#if defined(__ARM_FP) && __ARM_FP >= 4
#define configENABLE_FPU 1
#else
#define configENABLE_FPU 0
#endif
#define configENABLE_TRUSTZONE 0
#define configMINIMAL_SECURE_STACK_SIZE (1024)
#define configUSE_PREEMPTION 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#define configCPU_CLOCK_HZ SystemCoreClock
#define configTICK_RATE_HZ ( 1000 )
#define configMAX_PRIORITIES ( 5 )
#define configMINIMAL_STACK_SIZE ( 128 )
#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
#define configMAX_TASK_NAME_LEN 16
#define configUSE_16_BIT_TICKS 0
#define configIDLE_SHOULD_YIELD 1
#define configUSE_MUTEXES 1
#define configUSE_RECURSIVE_MUTEXES 1
#define configUSE_COUNTING_SEMAPHORES 1
#define configQUEUE_REGISTRY_SIZE 2
#define configUSE_QUEUE_SETS 0
#define configUSE_TIME_SLICING 0
#define configUSE_NEWLIB_REENTRANT 0
#define configENABLE_BACKWARD_COMPATIBILITY 1
#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0
#define configSUPPORT_STATIC_ALLOCATION 1
#define configSUPPORT_DYNAMIC_ALLOCATION 0
/* Hook function related definitions. */
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning
#define configCHECK_FOR_STACK_OVERFLOW 2
/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
#define configRECORD_STACK_HIGH_ADDRESS 1
#define configUSE_TRACE_FACILITY 1 // legacy trace
#define configUSE_STATS_FORMATTING_FUNCTIONS 0
/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES 2
/* Software timer related definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2)
#define configTIMER_QUEUE_LENGTH 32
#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE
/* Optional functions - most linkers will remove unused functions anyway. */
#define INCLUDE_vTaskPrioritySet 0
#define INCLUDE_uxTaskPriorityGet 0
#define INCLUDE_vTaskDelete 0
#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
#define INCLUDE_xResumeFromISR 0
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetSchedulerState 0
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
#define INCLUDE_pcTaskGetTaskName 0
#define INCLUDE_eTaskGetState 0
#define INCLUDE_xEventGroupSetBitFromISR 0
#define INCLUDE_xTimerPendFunctionCall 0
/* Define to trap errors during development. */
// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
#define configASSERT(_exp) \
do {\
if ( !(_exp) ) { \
volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \
taskDISABLE_INTERRUPTS(); \
__asm("BKPT #0\n"); \
}\
}\
} while(0)
#else
#define configASSERT( x )
#endif
/* FreeRTOS hooks to NVIC vectors */
#define xPortPendSVHandler PendSV_Handler
#define xPortSysTickHandler SysTick_Handler
#define vPortSVCHandler SVC_Handler
//--------------------------------------------------------------------+
// Interrupt nesting behavior configuration.
//--------------------------------------------------------------------+
// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
#define configPRIO_BITS 2
/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1)
/* The highest interrupt priority that can be used by any interrupt service
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2
/* Interrupt priorities used by the kernel port layer itself. These are generic
to all Cortex-M ports, and do not rely on any particular library functions. */
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
#endif /* __FREERTOS_CONFIG__H */

19
hw/bsp/lpc11/boards/lpcxpresso11u37/board.cmake Normal file
View File

@ -0,0 +1,19 @@
set(LPC_FAMILY 11xx)
set(JLINK_DEVICE LPC11U37/401)
set(PYOCD_TARGET lpc11u37)
set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc11u37.ld)
function(update_board TARGET)
target_compile_definitions(${TARGET} PUBLIC
CFG_EXAMPLE_MSC_READONLY
CFG_EXAMPLE_VIDEO_READONLY
)
target_sources(${TARGET} PRIVATE
${SDK_DIR}/src/gpio_${LPC_FAMILY}_1.c
${SDK_DIR}/src/sysctl_${LPC_FAMILY}.c
)
target_compile_options(${TARGET} PRIVATE
-Wno-error=unused-parameter
)
endfunction()

98
hw/bsp/lpc11/boards/lpcxpresso11u37/board.h Normal file
View File

@ -0,0 +1,98 @@
#ifndef BOARD_H
#define BOARD_H
#define LED_PORT 1
#define LED_PIN 24
#define LED_STATE_ON 0
// Wake up Switch
#define BUTTON_PORT 0
#define BUTTON_PIN 16
#define BUTTON_STATE_ACTIVE 0
/* System oscillator rate and RTC oscillator rate */
const uint32_t OscRateIn = 12000000;
const uint32_t ExtRateIn = 0;
/* Pin muxing table, only items that need changing from their default pin
state are in this table. Not every pin is mapped. */
/* IOCON pin definitions for pin muxing */
typedef struct {
uint32_t port : 8; /* Pin port */
uint32_t pin : 8; /* Pin number */
uint32_t modefunc : 16; /* Function and mode */
} PINMUX_GRP_T;
static const PINMUX_GRP_T pinmuxing[] = {
{0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS
{0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */
{0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX
{0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX
};
/* Setup system clocking */
static inline void Chip_SetupXtalClocking(void) {
volatile int i;
/* Powerup main oscillator */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD);
/* Wait 200us for OSC to be stablized, no status
indication, dummy wait. */
for (i = 0; i < 0x100; i++) {}
/* Set system PLL input to main oscillator */
Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC);
/* Power down PLL to change the PLL divider ratio */
Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD);
/* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz
MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2)
FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz
FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */
Chip_Clock_SetupSystemPLL(3, 1);
/* Powerup system PLL */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD);
/* Wait for PLL to lock */
while (!Chip_Clock_IsSystemPLLLocked()) {}
/* Set system clock divider to 1 */
Chip_Clock_SetSysClockDiv(1);
/* Setup FLASH access to 3 clocks */
Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU);
/* Set main clock source to the system PLL. This will drive 48MHz
for the main clock and 48MHz for the system clock */
Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT);
/* Set USB PLL input to main oscillator */
Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC);
/* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz
MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2)
FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz
FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */
Chip_Clock_SetupUSBPLL(3, 1);
/* Powerup USB PLL */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD);
/* Wait for PLL to lock */
while (!Chip_Clock_IsUSBPLLLocked()) {}
}
static inline void Chip_USB_Init(void) {
/* enable USB main clock */
Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1);
/* Enable AHB clock to the USB block and USB RAM. */
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB);
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM);
/* power UP USB Phy */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD);
}
#endif

208
hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c
View File

@ -1,208 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "chip.h"
#include "bsp/board_api.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
tud_int_handler(0);
}
//---------------------------------------------------------------- ----+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT 1
#define LED_PIN 24
#define LED_STATE_ON 0
// Wake up Switch
#define BUTTON_PORT 0
#define BUTTON_PIN 16
#define BUTTON_STATE_ACTIVE 0
/* System oscillator rate and RTC oscillator rate */
const uint32_t OscRateIn = 12000000;
const uint32_t ExtRateIn = 0;
/* Pin muxing table, only items that need changing from their default pin
state are in this table. Not every pin is mapped. */
/* IOCON pin definitions for pin muxing */
typedef struct {
uint32_t port : 8; /* Pin port */
uint32_t pin : 8; /* Pin number */
uint32_t modefunc : 16; /* Function and mode */
} PINMUX_GRP_T;
static const PINMUX_GRP_T pinmuxing[] =
{
{0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS
{0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */
{0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX
{0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX
};
/* Setup system clocking */
static void SystemSetupClocking(void)
{
volatile int i;
/* Powerup main oscillator */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD);
/* Wait 200us for OSC to be stablized, no status
indication, dummy wait. */
for (i = 0; i < 0x100; i++) {}
/* Set system PLL input to main oscillator */
Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC);
/* Power down PLL to change the PLL divider ratio */
Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD);
/* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz
MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2)
FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz
FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */
Chip_Clock_SetupSystemPLL(3, 1);
/* Powerup system PLL */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD);
/* Wait for PLL to lock */
while (!Chip_Clock_IsSystemPLLLocked()) {}
/* Set system clock divider to 1 */
Chip_Clock_SetSysClockDiv(1);
/* Setup FLASH access to 3 clocks */
Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU);
/* Set main clock source to the system PLL. This will drive 48MHz
for the main clock and 48MHz for the system clock */
Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT);
/* Set USB PLL input to main oscillator */
Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC);
/* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz
MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2)
FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz
FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */
Chip_Clock_SetupUSBPLL(3, 1);
/* Powerup USB PLL */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD);
/* Wait for PLL to lock */
while (!Chip_Clock_IsUSBPLLLocked()) {}
}
// Invoked by startup code
void SystemInit(void)
{
SystemSetupClocking();
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_RAM1);
/* Enable IOCON clock */
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++)
{
Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc);
}
}
void board_init(void)
{
SystemCoreClockUpdate();
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
Chip_GPIO_Init(LPC_GPIO);
// LED
Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN);
// Button
Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
// USB: Setup PLL clock, and power
/* enable USB main clock */
Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1);
/* Enable AHB clock to the USB block and USB RAM. */
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB);
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM);
/* power UP USB Phy */
Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD);
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
(void) buf; (void) len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
(void) buf; (void) len;
return 0;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

12
hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake Normal file
View File

@ -0,0 +1,12 @@
set(LPC_FAMILY 11u6x)
set(JLINK_DEVICE LPC11U68)
set(PYOCD_TARGET LPC11U68)
set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc11u68.ld)
function(update_board TARGET)
target_sources(${TARGET} PUBLIC
${SDK_DIR}/src/gpio_${LPC_FAMILY}.c
${SDK_DIR}/src/syscon_${LPC_FAMILY}.c
)
endfunction()

27
hw/bsp/lpc11/boards/lpcxpresso11u68/board.h Normal file
View File

@ -0,0 +1,27 @@
#ifndef BOARD_H
#define BOARD_H
#define LED_PORT 2
#define LED_PIN 17
#define LED_STATE_ON 0
// Wake up Switch
#define BUTTON_PORT 0
#define BUTTON_PIN 16
#define BUTTON_STATE_ACTIVE 0
/* System oscillator rate and RTC oscillator rate */
const uint32_t OscRateIn = 12000000;
const uint32_t RTCOscRateIn = 32768;
/* Pin muxing table, only items that need changing from their default pin
state are in this table. Not every pin is mapped. */
static const PINMUX_GRP_T pinmuxing[] = {
{0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS
{0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX
{0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX
{2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN
{2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT
};
#endif

1
hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk
View File

@ -5,7 +5,6 @@ CFLAGS += \
-DCORE_M0PLUS \
-D__VTOR_PRESENT=0 \
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
# All source paths should be relative to the top level.
LD_FILE = $(BOARD_PATH)/lpc11u68.ld

75
hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c → hw/bsp/lpc11/family.c
View File

@ -24,55 +24,42 @@
* This file is part of the TinyUSB stack.
*/
#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif
#include "chip.h"
#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif
#include "bsp/board_api.h"
#include "board.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
void USB_IRQHandler(void) {
tud_int_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT 2
#define LED_PIN 17
#define LED_STATE_ON 0
// Wake up Switch
#define BUTTON_PORT 0
#define BUTTON_PIN 16
#define BUTTON_STATE_ACTIVE 0
/* System oscillator rate and RTC oscillator rate */
const uint32_t OscRateIn = 12000000;
const uint32_t RTCOscRateIn = 32768;
/* Pin muxing table, only items that need changing from their default pin
state are in this table. Not every pin is mapped. */
static const PINMUX_GRP_T pinmuxing[] =
{
{0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS
{0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX
{0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX
{2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN
{2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT
};
// Invoked by startup code
void SystemInit(void)
{
void SystemInit(void) {
/* Enable IOCON clock */
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++) {
Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc);
}
Chip_SetupXtalClocking();
}
void board_init(void)
{
void board_init(void) {
SystemCoreClockUpdate();
#if CFG_TUSB_OS == OPT_OS_NONE
@ -99,37 +86,35 @@ void board_init(void)
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
void board_led_write(bool state) {
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
}
uint32_t board_button_read(void)
{
uint32_t board_button_read(void) {
return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
(void) buf; (void) len;
int board_uart_read(uint8_t* buf, int len) {
(void) buf;
(void) len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
(void) buf; (void) len;
int board_uart_write(void const* buf, int len) {
(void) buf;
(void) len;
return 0;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
void SysTick_Handler(void) {
system_ticks++;
}
uint32_t board_millis(void)
{
uint32_t board_millis(void) {
return system_ticks;
}
#endif

104
hw/bsp/lpc11/family.cmake Normal file
View File

@ -0,0 +1,104 @@
include_guard()
# include board specific
include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
if (LPC_FAMILY STREQUAL 11xx)
set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx)
else()
set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc${LPC_FAMILY}/lpc_chip_${LPC_FAMILY})
endif()
# toolchain set up
set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor")
set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
set(FAMILY_MCUS LPC11UXX CACHE INTERNAL "")
#------------------------------------
# BOARD_TARGET
#------------------------------------
# only need to be built ONCE for all examples
function(add_board_target BOARD_TARGET)
if (TARGET ${BOARD_TARGET})
return()
endif ()
add_library(${BOARD_TARGET} STATIC
${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c
${SDK_DIR}/src/chip_${LPC_FAMILY}.c
${SDK_DIR}/src/clock_${LPC_FAMILY}.c
${SDK_DIR}/src/iocon_${LPC_FAMILY}.c
${SDK_DIR}/src/sysinit_${LPC_FAMILY}.c
)
target_compile_definitions(${BOARD_TARGET} PUBLIC
__USE_LPCOPEN
__VTOR_PRESENT=0
CORE_M0
CORE_M0PLUS
CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
)
target_include_directories(${BOARD_TARGET} PUBLIC
${SDK_DIR}/inc
${CMSIS_DIR}/CMSIS/Core/Include
)
update_board(${BOARD_TARGET})
if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
target_compile_options(${BOARD_TARGET} PUBLIC -nostdlib)
target_link_options(${BOARD_TARGET} PUBLIC
"LINKER:--script=${LD_FILE_GNU}"
--specs=nosys.specs --specs=nano.specs
)
elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
target_link_options(${BOARD_TARGET} PUBLIC
"LINKER:--script=${LD_FILE_GNU}"
)
elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
target_link_options(${BOARD_TARGET} PUBLIC
"LINKER:--config=${LD_FILE_IAR}"
)
endif ()
endfunction()
#------------------------------------
# Functions
#------------------------------------
function(family_configure_example TARGET RTOS)
family_configure_common(${TARGET} ${RTOS})
# Board target
add_board_target(board_${BOARD})
#---------- Port Specific ----------
# These files are built for each example since it depends on example's tusb_config.h
target_sources(${TARGET} PUBLIC
# BSP
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
)
target_include_directories(${TARGET} PUBLIC
# family, hw, board
${CMAKE_CURRENT_FUNCTION_LIST_DIR}
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
)
# Add TinyUSB target and port source
family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX ${RTOS})
target_sources(${TARGET}-tinyusb PUBLIC
${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
)
target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
# Link dependencies
target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
# Flashing
family_flash_jlink(${TARGET})
#family_flash_nxplink(${TARGET})
endfunction()

5
hw/bsp/lpc11/family.mk
View File

@ -1,5 +1,3 @@
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
MCU_DIR = hw/mcu/nxp/lpcopen/lpc$(MCU)/lpc_chip_$(MCU)
include $(TOP)/$(BOARD_PATH)/board.mk
CPU_CORE ?= cortex-m0plus
@ -34,7 +32,8 @@ SRC_C += \
endif
INC += \
$(TOP)/$(MCU_DIR)/inc
$(TOP)/$(BOARD_PATH) \
$(TOP)/$(MCU_DIR)/inc \
# For flash-jlink target
JLINK_DEVICE = LPC11U68

10
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
View File

@ -42,7 +42,17 @@
#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX)
// LPCOpen
#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif
#include "chip.h"
#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif
#else
// SDK
#include "fsl_device_registers.h"