clean up

README.md

@@ -77,7 +77,7 @@ Supports multiple device configurations by dynamically changing usb descriptors.
 
 TinyUSB is completely thread-safe by pushing all ISR events into a central queue, then process it later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as CDC FIFO. Therefore the stack needs to use some of OS's basic APIs. Following OSes are already supported out of the box.
 
-- **No OS** : Disabling USB IRQ is used as way to provide mutex
+- **No OS**
 - **FreeRTOS**
 - **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its [own repo](https://github.com/hathach/mynewt-tinyusb-example) 
 

src/common/tusb_fifo.h

@@ -53,9 +53,6 @@ extern "C" {
 #define tu_fifo_mutex_t  osal_mutex_t
 #endif
 
-/** \struct tu_fifo_t
- * \brief Simple Circular FIFO
- */
 typedef struct
 {
   uint8_t* buffer               ; ///< buffer pointer
@@ -104,7 +101,8 @@ bool tu_fifo_clear(tu_fifo_t *f);
 bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable);
 
 #if CFG_FIFO_MUTEX
-static inline void tu_fifo_config_mutex(tu_fifo_t *f, tu_fifo_mutex_t write_mutex_hdl, tu_fifo_mutex_t read_mutex_hdl)
+TU_ATTR_ALWAYS_INLINE static inline
+void tu_fifo_config_mutex(tu_fifo_t *f, tu_fifo_mutex_t write_mutex_hdl, tu_fifo_mutex_t read_mutex_hdl)
 {
   f->mutex_wr = write_mutex_hdl;
   f->mutex_rd = read_mutex_hdl;
@@ -129,7 +127,8 @@ uint16_t tu_fifo_remaining              (tu_fifo_t* f);
 bool     tu_fifo_overflowed             (tu_fifo_t* f);
 void     tu_fifo_correct_read_pointer   (tu_fifo_t* f);
 
-static inline uint16_t tu_fifo_depth(tu_fifo_t* f)
+static inline
+uint16_t tu_fifo_depth(tu_fifo_t* f)
 {
   return f->depth;
 }

src/device/usbd.h

@@ -70,8 +70,8 @@ bool tud_mounted(void);
 bool tud_suspended(void);
 
 // Check if device is ready to transfer
-TU_ATTR_ALWAYS_INLINE
-static inline bool tud_ready(void)
+TU_ATTR_ALWAYS_INLINE static inline
+bool tud_ready(void)
 {
   return tud_mounted() && !tud_suspended();
 }

src/device/usbd_pvt.h

@@ -94,7 +94,7 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr);
 // Check if endpoint is stalled
 bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr);
 
-static inline
+TU_ATTR_ALWAYS_INLINE static inline
 bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
 {
   return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr);