Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

fix idf usb pin init changes

Browse Source
This commit is contained in:
hathach 2020-05-29 13:06:33 +07:00
parent e9b41cb97d
commit e0490ae786
2 changed files with 13 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
examples/device/cdc_msc_freertos/src/tusb_config.h
View File

@ -48,8 +48,10 @@
#define CFG_TUSB_OS OPT_OS_FREERTOS #define CFG_TUSB_OS OPT_OS_FREERTOS
// CFG_TUSB_DEBUG is defined by compiler in DEBUG build // can be defined by compiler in DEBUG build
// #define CFG_TUSB_DEBUG 0 #ifndef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG 0
#endif
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put * Tinyusb use follows macros to declare transferring memory so that they can be put

9
hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c
View File

@ -26,7 +26,9 @@
#include "../board.h" #include "../board.h"
#include "driver/gpio.h" #include "driver/gpio.h"
#include "driver/periph_ctrl.h"
#include "hal/usb_hal.h" #include "hal/usb_hal.h"
#include "soc/usb_periph.h"
#include "driver/rmt.h" #include "driver/rmt.h"
#include "led_strip/include/led_strip.h" #include "led_strip/include/led_strip.h"
@ -66,10 +68,17 @@ void board_init(void)
gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY);
// USB Controller Hal init // USB Controller Hal init
periph_module_reset(PERIPH_USB_MODULE);
periph_module_enable(PERIPH_USB_MODULE);
usb_hal_context_t hal = { usb_hal_context_t hal = {
.use_external_phy = false // use built-in PHY .use_external_phy = false // use built-in PHY
}; };
usb_hal_init(&hal); usb_hal_init(&hal);
// Pin drive strength
gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3);
gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3);
} }
// Turn LED on or off // Turn LED on or off