mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-31 05:52:55 +08:00
msc_device.c declare and separate epbuf from interface struct, make cbw and csw as normal variable. Also reformat code
This commit is contained in:
hathach
parent
f252ab4364
commit
f148670753
@ -53,18 +53,8 @@ enum {
|
||||
};
|
||||
|
||||
typedef struct {
|
||||
union {
|
||||
CFG_TUD_MEM_ALIGN msc_cbw_t cbw;
|
||||
TUD_DCACHE_PADDING;
|
||||
};
|
||||
union {
|
||||
CFG_TUD_MEM_ALIGN msc_csw_t csw;
|
||||
TUD_DCACHE_PADDING;
|
||||
};
|
||||
union {
|
||||
CFG_TUD_MEM_ALIGN uint8_t ep_buf[CFG_TUD_MSC_EP_BUFSIZE];
|
||||
TUD_DCACHE_PADDING;
|
||||
};
|
||||
TU_ATTR_ALIGNED(4) msc_cbw_t cbw;
|
||||
TU_ATTR_ALIGNED(4) msc_csw_t csw;
|
||||
|
||||
uint8_t itf_num;
|
||||
uint8_t ep_in;
|
||||
@ -72,6 +62,7 @@ typedef struct {
|
||||
|
||||
// Bulk Only Transfer (BOT) Protocol
|
||||
uint8_t stage;
|
||||
|
||||
uint32_t total_len; // byte to be transferred, can be smaller than total_bytes in cbw
|
||||
uint32_t xferred_len; // numbered of bytes transferred so far in the Data Stage
|
||||
|
||||
@ -81,7 +72,11 @@ typedef struct {
|
||||
uint8_t add_sense_qualifier;
|
||||
}mscd_interface_t;
|
||||
|
||||
CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN static mscd_interface_t _mscd_itf;
|
||||
static mscd_interface_t _mscd_itf;
|
||||
|
||||
CFG_TUD_MEM_SECTION static struct {
|
||||
TUD_EPBUF_DEF(ep_buf, CFG_TUD_MSC_EP_BUFSIZE);
|
||||
} _mscd_epbuf;
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// INTERNAL OBJECT & FUNCTION DECLARATION
|
||||
@ -99,14 +94,14 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) {
|
||||
static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) {
|
||||
// Data residue is always = host expect - actual transferred
|
||||
p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len;
|
||||
|
||||
p_msc->stage = MSC_STAGE_STATUS_SENT;
|
||||
return usbd_edpt_xfer(rhport, p_msc->ep_in , (uint8_t*) &p_msc->csw, sizeof(msc_csw_t));
|
||||
memcpy(_mscd_epbuf.ep_buf, &p_msc->csw, sizeof(msc_csw_t));
|
||||
return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.ep_buf, sizeof(msc_csw_t));
|
||||
}
|
||||
|
||||
static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) {
|
||||
p_msc->stage = MSC_STAGE_CMD;
|
||||
return usbd_edpt_xfer(rhport, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t));
|
||||
return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.ep_buf, sizeof(msc_cbw_t));
|
||||
}
|
||||
|
||||
static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) {
|
||||
@ -134,10 +129,8 @@ static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status
|
||||
|
||||
static inline uint32_t rdwr10_get_lba(uint8_t const command[]) {
|
||||
// use offsetof to avoid pointer to the odd/unaligned address
|
||||
uint32_t const lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba));
|
||||
|
||||
// lba is in Big Endian
|
||||
return tu_ntohl(lba);
|
||||
const uint32_t lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba));
|
||||
return tu_ntohl(lba); // lba is in Big Endian
|
||||
}
|
||||
|
||||
static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) {
|
||||
@ -148,10 +141,9 @@ static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) {
|
||||
static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) {
|
||||
// first extract block count in the command
|
||||
uint16_t const block_count = rdwr10_get_blockcount(cbw);
|
||||
|
||||
// invalid block count
|
||||
if (block_count == 0) return 0;
|
||||
|
||||
if (block_count == 0) {
|
||||
return 0; // invalid block count
|
||||
}
|
||||
return (uint16_t) (cbw->total_bytes / block_count);
|
||||
}
|
||||
|
||||
@ -214,19 +206,15 @@ TU_ATTR_UNUSED tu_static tu_lookup_table_t const _msc_scsi_cmd_table = {
|
||||
//--------------------------------------------------------------------+
|
||||
// APPLICATION API
|
||||
//--------------------------------------------------------------------+
|
||||
bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier)
|
||||
{
|
||||
bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier) {
|
||||
(void) lun;
|
||||
|
||||
_mscd_itf.sense_key = sense_key;
|
||||
_mscd_itf.add_sense_code = add_sense_code;
|
||||
_mscd_itf.add_sense_qualifier = add_sense_qualifier;
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static inline void set_sense_medium_not_present(uint8_t lun)
|
||||
{
|
||||
static inline void set_sense_medium_not_present(uint8_t lun) {
|
||||
// default sense is NOT READY, MEDIUM NOT PRESENT
|
||||
tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00);
|
||||
}
|
||||
@ -239,47 +227,38 @@ void mscd_init(void) {
|
||||
}
|
||||
|
||||
bool mscd_deinit(void) {
|
||||
// nothing to do
|
||||
return true;
|
||||
return true; // nothing to do
|
||||
}
|
||||
|
||||
void mscd_reset(uint8_t rhport)
|
||||
{
|
||||
void mscd_reset(uint8_t rhport) {
|
||||
(void) rhport;
|
||||
tu_memclr(&_mscd_itf, sizeof(mscd_interface_t));
|
||||
}
|
||||
|
||||
uint16_t mscd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len)
|
||||
{
|
||||
uint16_t mscd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len) {
|
||||
// only support SCSI's BOT protocol
|
||||
TU_VERIFY(TUSB_CLASS_MSC == itf_desc->bInterfaceClass &&
|
||||
MSC_SUBCLASS_SCSI == itf_desc->bInterfaceSubClass &&
|
||||
MSC_PROTOCOL_BOT == itf_desc->bInterfaceProtocol, 0);
|
||||
|
||||
// msc driver length is fixed
|
||||
uint16_t const drv_len = sizeof(tusb_desc_interface_t) + 2*sizeof(tusb_desc_endpoint_t);
|
||||
|
||||
// Max length must be at least 1 interface + 2 endpoints
|
||||
TU_ASSERT(max_len >= drv_len, 0);
|
||||
TU_ASSERT(max_len >= drv_len, 0); // Max length must be at least 1 interface + 2 endpoints
|
||||
|
||||
mscd_interface_t * p_msc = &_mscd_itf;
|
||||
p_msc->itf_num = itf_desc->bInterfaceNumber;
|
||||
|
||||
// Open endpoint pair
|
||||
TU_ASSERT( usbd_open_edpt_pair(rhport, tu_desc_next(itf_desc), 2, TUSB_XFER_BULK, &p_msc->ep_out, &p_msc->ep_in), 0 );
|
||||
TU_ASSERT(usbd_open_edpt_pair(rhport, tu_desc_next(itf_desc), 2, TUSB_XFER_BULK, &p_msc->ep_out, &p_msc->ep_in), 0);
|
||||
|
||||
// Prepare for Command Block Wrapper
|
||||
TU_ASSERT( prepare_cbw(rhport, p_msc), drv_len);
|
||||
TU_ASSERT(prepare_cbw(rhport, p_msc), drv_len);
|
||||
|
||||
return drv_len;
|
||||
}
|
||||
|
||||
static void proc_bot_reset(mscd_interface_t* p_msc)
|
||||
{
|
||||
static void proc_bot_reset(mscd_interface_t* p_msc) {
|
||||
p_msc->stage = MSC_STAGE_CMD;
|
||||
p_msc->total_len = 0;
|
||||
p_msc->xferred_len = 0;
|
||||
|
||||
p_msc->sense_key = 0;
|
||||
p_msc->add_sense_code = 0;
|
||||
p_msc->add_sense_qualifier = 0;
|
||||
@ -288,10 +267,10 @@ static void proc_bot_reset(mscd_interface_t* p_msc)
|
||||
// Invoked when a control transfer occurred on an interface of this class
|
||||
// Driver response accordingly to the request and the transfer stage (setup/data/ack)
|
||||
// return false to stall control endpoint (e.g unsupported request)
|
||||
bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request)
|
||||
{
|
||||
// nothing to do with DATA & ACK stage
|
||||
if (stage != CONTROL_STAGE_SETUP) return true;
|
||||
bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) {
|
||||
if (stage != CONTROL_STAGE_SETUP) {
|
||||
return true; // nothing to do with DATA & ACK stage
|
||||
}
|
||||
|
||||
mscd_interface_t* p_msc = &_mscd_itf;
|
||||
|
||||
@ -299,35 +278,25 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t
|
||||
if ( TUSB_REQ_TYPE_STANDARD == request->bmRequestType_bit.type &&
|
||||
TUSB_REQ_RCPT_ENDPOINT == request->bmRequestType_bit.recipient &&
|
||||
TUSB_REQ_CLEAR_FEATURE == request->bRequest &&
|
||||
TUSB_REQ_FEATURE_EDPT_HALT == request->wValue )
|
||||
{
|
||||
TUSB_REQ_FEATURE_EDPT_HALT == request->wValue ) {
|
||||
uint8_t const ep_addr = tu_u16_low(request->wIndex);
|
||||
|
||||
if ( p_msc->stage == MSC_STAGE_NEED_RESET )
|
||||
{
|
||||
if (p_msc->stage == MSC_STAGE_NEED_RESET) {
|
||||
// reset recovery is required to recover from this stage
|
||||
// Clear Stall request cannot resolve this -> continue to stall endpoint
|
||||
usbd_edpt_stall(rhport, ep_addr);
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( ep_addr == p_msc->ep_in )
|
||||
{
|
||||
if ( p_msc->stage == MSC_STAGE_STATUS )
|
||||
{
|
||||
} else {
|
||||
if (ep_addr == p_msc->ep_in) {
|
||||
if (p_msc->stage == MSC_STAGE_STATUS) {
|
||||
// resume sending SCSI status if we are in this stage previously before stalled
|
||||
TU_ASSERT( send_csw(rhport, p_msc) );
|
||||
TU_ASSERT(send_csw(rhport, p_msc));
|
||||
}
|
||||
}
|
||||
else if ( ep_addr == p_msc->ep_out )
|
||||
{
|
||||
if ( p_msc->stage == MSC_STAGE_CMD )
|
||||
{
|
||||
} else if (ep_addr == p_msc->ep_out) {
|
||||
if (p_msc->stage == MSC_STAGE_CMD) {
|
||||
// part of reset recovery (probably due to invalid CBW) -> prepare for new command
|
||||
// Note: skip if already queued previously
|
||||
if ( usbd_edpt_ready(rhport, p_msc->ep_out) )
|
||||
{
|
||||
TU_ASSERT( prepare_cbw(rhport, p_msc) );
|
||||
if (usbd_edpt_ready(rhport, p_msc->ep_out)) {
|
||||
TU_ASSERT(prepare_cbw(rhport, p_msc));
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -339,33 +308,27 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t
|
||||
// From this point only handle class request only
|
||||
TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS);
|
||||
|
||||
switch ( request->bRequest )
|
||||
{
|
||||
switch ( request->bRequest ) {
|
||||
case MSC_REQ_RESET:
|
||||
TU_LOG_DRV(" MSC BOT Reset\r\n");
|
||||
TU_VERIFY(request->wValue == 0 && request->wLength == 0);
|
||||
|
||||
// driver state reset
|
||||
proc_bot_reset(p_msc);
|
||||
|
||||
proc_bot_reset(p_msc); // driver state reset
|
||||
tud_control_status(rhport, request);
|
||||
break;
|
||||
|
||||
case MSC_REQ_GET_MAX_LUN:
|
||||
{
|
||||
case MSC_REQ_GET_MAX_LUN: {
|
||||
TU_LOG_DRV(" MSC Get Max Lun\r\n");
|
||||
TU_VERIFY(request->wValue == 0 && request->wLength == 1);
|
||||
|
||||
uint8_t maxlun = 1;
|
||||
if (tud_msc_get_maxlun_cb) maxlun = tud_msc_get_maxlun_cb();
|
||||
if (tud_msc_get_maxlun_cb) {
|
||||
maxlun = tud_msc_get_maxlun_cb();
|
||||
}
|
||||
TU_VERIFY(maxlun);
|
||||
|
||||
// MAX LUN is minus 1 by specs
|
||||
maxlun--;
|
||||
|
||||
maxlun--; // MAX LUN is minus 1 by specs
|
||||
tud_control_xfer(rhport, request, &maxlun, 1);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
default: return false; // stall unsupported request
|
||||
}
|
||||
@ -373,35 +336,34 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t
|
||||
return true;
|
||||
}
|
||||
|
||||
bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes)
|
||||
{
|
||||
bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) {
|
||||
(void) event;
|
||||
|
||||
mscd_interface_t* p_msc = &_mscd_itf;
|
||||
msc_cbw_t const * p_cbw = &p_msc->cbw;
|
||||
msc_csw_t * p_csw = &p_msc->csw;
|
||||
msc_cbw_t * p_cbw = &p_msc->cbw;
|
||||
msc_csw_t * p_csw = &p_msc->csw;
|
||||
|
||||
switch (p_msc->stage)
|
||||
{
|
||||
switch (p_msc->stage) {
|
||||
case MSC_STAGE_CMD:
|
||||
//------------- new CBW received -------------//
|
||||
// Complete IN while waiting for CMD is usually Status of previous SCSI op, ignore it
|
||||
if(ep_addr != p_msc->ep_out) return true;
|
||||
if (ep_addr != p_msc->ep_out) {
|
||||
return true;
|
||||
}
|
||||
|
||||
if ( !(xferred_bytes == sizeof(msc_cbw_t) && p_cbw->signature == MSC_CBW_SIGNATURE) )
|
||||
{
|
||||
TU_LOG_DRV(" SCSI CBW is not valid\r\n");
|
||||
const uint32_t signature = tu_le32toh(tu_unaligned_read32(_mscd_epbuf.ep_buf));
|
||||
|
||||
if (!(xferred_bytes == sizeof(msc_cbw_t) && signature == MSC_CBW_SIGNATURE)) {
|
||||
// BOT 6.6.1 If CBW is not valid stall both endpoints until reset recovery
|
||||
TU_LOG_DRV(" SCSI CBW is not valid\r\n");
|
||||
p_msc->stage = MSC_STAGE_NEED_RESET;
|
||||
|
||||
// invalid CBW stall both endpoints
|
||||
usbd_edpt_stall(rhport, p_msc->ep_in);
|
||||
usbd_edpt_stall(rhport, p_msc->ep_out);
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
memcpy(p_cbw, _mscd_epbuf.ep_buf, sizeof(msc_cbw_t));
|
||||
|
||||
TU_LOG_DRV(" SCSI Command [Lun%u]: %s\r\n", p_cbw->lun, tu_lookup_find(&_msc_scsi_cmd_table, p_cbw->command[0]));
|
||||
//TU_LOG_MEM(MSC_DEBUG, p_cbw, xferred_bytes, 2);
|
||||
|
||||
@ -416,87 +378,65 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
|
||||
p_msc->xferred_len = 0;
|
||||
|
||||
// Read10 or Write10
|
||||
if ( (SCSI_CMD_READ_10 == p_cbw->command[0]) || (SCSI_CMD_WRITE_10 == p_cbw->command[0]) )
|
||||
{
|
||||
if ((SCSI_CMD_READ_10 == p_cbw->command[0]) || (SCSI_CMD_WRITE_10 == p_cbw->command[0])) {
|
||||
uint8_t const status = rdwr10_validate_cmd(p_cbw);
|
||||
|
||||
if ( status != MSC_CSW_STATUS_PASSED)
|
||||
{
|
||||
if (status != MSC_CSW_STATUS_PASSED) {
|
||||
fail_scsi_op(rhport, p_msc, status);
|
||||
}else if ( p_cbw->total_bytes )
|
||||
{
|
||||
if (SCSI_CMD_READ_10 == p_cbw->command[0])
|
||||
{
|
||||
} else if (p_cbw->total_bytes) {
|
||||
if (SCSI_CMD_READ_10 == p_cbw->command[0]) {
|
||||
proc_read10_cmd(rhport, p_msc);
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
proc_write10_cmd(rhport, p_msc);
|
||||
}
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// no data transfer, only exist in complaint test suite
|
||||
p_msc->stage = MSC_STAGE_STATUS;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
} else {
|
||||
// For other SCSI commands
|
||||
// 1. OUT : queue transfer (invoke app callback after done)
|
||||
// 2. IN & Zero: Process if is built-in, else Invoke app callback. Skip DATA if zero length
|
||||
if ( (p_cbw->total_bytes > 0 ) && !is_data_in(p_cbw->dir) )
|
||||
{
|
||||
if (p_cbw->total_bytes > CFG_TUD_MSC_EP_BUFSIZE)
|
||||
{
|
||||
if ((p_cbw->total_bytes > 0) && !is_data_in(p_cbw->dir)) {
|
||||
if (p_cbw->total_bytes > CFG_TUD_MSC_EP_BUFSIZE) {
|
||||
TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n");
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// Didn't check for case 9 (Ho > Dn), which requires examining scsi command first
|
||||
// but it is OK to just receive data then responded with failed status
|
||||
TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, (uint16_t) p_msc->total_len) );
|
||||
TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.ep_buf, (uint16_t) p_msc->total_len));
|
||||
}
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// First process if it is a built-in commands
|
||||
int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, p_msc->ep_buf, CFG_TUD_MSC_EP_BUFSIZE);
|
||||
int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, _mscd_epbuf.ep_buf, CFG_TUD_MSC_EP_BUFSIZE);
|
||||
|
||||
// Invoke user callback if not built-in
|
||||
if ( (resplen < 0) && (p_msc->sense_key == 0) )
|
||||
{
|
||||
resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len);
|
||||
if ((resplen < 0) && (p_msc->sense_key == 0)) {
|
||||
resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_epbuf.ep_buf, (uint16_t)p_msc->total_len);
|
||||
}
|
||||
|
||||
if ( resplen < 0 )
|
||||
{
|
||||
if (resplen < 0) {
|
||||
// unsupported command
|
||||
TU_LOG_DRV(" SCSI unsupported or failed command\r\n");
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}
|
||||
else if (resplen == 0)
|
||||
{
|
||||
if (p_cbw->total_bytes)
|
||||
{
|
||||
} else if (resplen == 0) {
|
||||
if (p_cbw->total_bytes) {
|
||||
// 6.7 The 13 Cases: case 4 (Hi > Dn)
|
||||
// TU_LOG(MSC_DEBUG, " SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes);
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// case 1 Hn = Dn: all good
|
||||
p_msc->stage = MSC_STAGE_STATUS;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( p_cbw->total_bytes == 0 )
|
||||
{
|
||||
} else {
|
||||
if (p_cbw->total_bytes == 0) {
|
||||
// 6.7 The 13 Cases: case 2 (Hn < Di)
|
||||
// TU_LOG(MSC_DEBUG, " SCSI case 2 (Hn < Di): %lu\r\n", p_cbw->total_bytes);
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// cannot return more than host expect
|
||||
p_msc->total_len = tu_min32((uint32_t) resplen, p_cbw->total_bytes);
|
||||
TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) p_msc->total_len) );
|
||||
p_msc->total_len = tu_min32((uint32_t)resplen, p_cbw->total_bytes);
|
||||
TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.ep_buf, (uint16_t) p_msc->total_len));
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -507,50 +447,37 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
|
||||
TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun);
|
||||
//TU_LOG_MEM(MSC_DEBUG, p_msc->ep_buf, xferred_bytes, 2);
|
||||
|
||||
if (SCSI_CMD_READ_10 == p_cbw->command[0])
|
||||
{
|
||||
if (SCSI_CMD_READ_10 == p_cbw->command[0]) {
|
||||
p_msc->xferred_len += xferred_bytes;
|
||||
|
||||
if ( p_msc->xferred_len >= p_msc->total_len )
|
||||
{
|
||||
if ( p_msc->xferred_len >= p_msc->total_len ) {
|
||||
// Data Stage is complete
|
||||
p_msc->stage = MSC_STAGE_STATUS;
|
||||
}else
|
||||
{
|
||||
}else {
|
||||
proc_read10_cmd(rhport, p_msc);
|
||||
}
|
||||
}
|
||||
else if (SCSI_CMD_WRITE_10 == p_cbw->command[0])
|
||||
{
|
||||
} else if (SCSI_CMD_WRITE_10 == p_cbw->command[0]) {
|
||||
proc_write10_new_data(rhport, p_msc, xferred_bytes);
|
||||
}
|
||||
else
|
||||
{
|
||||
} else {
|
||||
p_msc->xferred_len += xferred_bytes;
|
||||
|
||||
// OUT transfer, invoke callback if needed
|
||||
if ( !is_data_in(p_cbw->dir) )
|
||||
{
|
||||
int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len);
|
||||
if ( !is_data_in(p_cbw->dir) ) {
|
||||
int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_epbuf.ep_buf, (uint16_t) p_msc->total_len);
|
||||
|
||||
if ( cb_result < 0 )
|
||||
{
|
||||
if ( cb_result < 0 ) {
|
||||
// unsupported command
|
||||
TU_LOG_DRV(" SCSI unsupported command\r\n");
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}else
|
||||
{
|
||||
}else {
|
||||
// TODO haven't implement this scenario any further yet
|
||||
}
|
||||
}
|
||||
|
||||
if ( p_msc->xferred_len >= p_msc->total_len )
|
||||
{
|
||||
if ( p_msc->xferred_len >= p_msc->total_len ) {
|
||||
// Data Stage is complete
|
||||
p_msc->stage = MSC_STAGE_STATUS;
|
||||
}
|
||||
else
|
||||
{
|
||||
} else {
|
||||
// This scenario with command that take more than one transfer is already rejected at Command stage
|
||||
TU_BREAKPOINT();
|
||||
}
|
||||
@ -563,53 +490,52 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
|
||||
|
||||
case MSC_STAGE_STATUS_SENT:
|
||||
// Wait for the Status phase to complete
|
||||
if( (ep_addr == p_msc->ep_in) && (xferred_bytes == sizeof(msc_csw_t)) )
|
||||
{
|
||||
if ((ep_addr == p_msc->ep_in) && (xferred_bytes == sizeof(msc_csw_t))) {
|
||||
TU_LOG_DRV(" SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status);
|
||||
// TU_LOG_MEM(MSC_DEBUG, p_csw, xferred_bytes, 2);
|
||||
|
||||
// Invoke complete callback if defined
|
||||
// Note: There is racing issue with samd51 + qspi flash testing with arduino
|
||||
// if complete_cb() is invoked after queuing the status.
|
||||
switch(p_cbw->command[0])
|
||||
{
|
||||
switch (p_cbw->command[0]) {
|
||||
case SCSI_CMD_READ_10:
|
||||
if ( tud_msc_read10_complete_cb ) tud_msc_read10_complete_cb(p_cbw->lun);
|
||||
break;
|
||||
if (tud_msc_read10_complete_cb) {
|
||||
tud_msc_read10_complete_cb(p_cbw->lun);
|
||||
}
|
||||
break;
|
||||
|
||||
case SCSI_CMD_WRITE_10:
|
||||
if ( tud_msc_write10_complete_cb ) tud_msc_write10_complete_cb(p_cbw->lun);
|
||||
break;
|
||||
if (tud_msc_write10_complete_cb) {
|
||||
tud_msc_write10_complete_cb(p_cbw->lun);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
if ( tud_msc_scsi_complete_cb ) tud_msc_scsi_complete_cb(p_cbw->lun, p_cbw->command);
|
||||
break;
|
||||
if (tud_msc_scsi_complete_cb) {
|
||||
tud_msc_scsi_complete_cb(p_cbw->lun, p_cbw->command);
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
TU_ASSERT( prepare_cbw(rhport, p_msc) );
|
||||
}else
|
||||
{
|
||||
TU_ASSERT(prepare_cbw(rhport, p_msc));
|
||||
} else {
|
||||
// Any xfer ended here is consider unknown error, ignore it
|
||||
TU_LOG1(" Warning expect SCSI Status but received unknown data\r\n");
|
||||
}
|
||||
break;
|
||||
break;
|
||||
|
||||
default : break;
|
||||
default: break;
|
||||
}
|
||||
|
||||
if ( p_msc->stage == MSC_STAGE_STATUS )
|
||||
{
|
||||
if (p_msc->stage == MSC_STAGE_STATUS) {
|
||||
// skip status if epin is currently stalled, will do it when received Clear Stall request
|
||||
if ( !usbd_edpt_stalled(rhport, p_msc->ep_in) )
|
||||
{
|
||||
if ( (p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir) )
|
||||
{
|
||||
if (!usbd_edpt_stalled(rhport, p_msc->ep_in)) {
|
||||
if ((p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir)) {
|
||||
// 6.7 The 13 Cases: case 5 (Hi > Di): STALL before status
|
||||
// TU_LOG(MSC_DEBUG, " SCSI case 5 (Hi > Di): %lu > %lu\r\n", p_cbw->total_bytes, p_msc->xferred_len);
|
||||
usbd_edpt_stall(rhport, p_msc->ep_in);
|
||||
}else
|
||||
{
|
||||
TU_ASSERT( send_csw(rhport, p_msc) );
|
||||
} else {
|
||||
TU_ASSERT(send_csw(rhport, p_msc));
|
||||
}
|
||||
}
|
||||
|
||||
@ -617,8 +543,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
|
||||
// WORKAROUND: cxd56 has its own nuttx usb stack which does not forward Set/ClearFeature(Endpoint) to DCD.
|
||||
// There is no way for us to know when EP is un-stall, therefore we will unconditionally un-stall here and
|
||||
// hope everything will work
|
||||
if ( usbd_edpt_stalled(rhport, p_msc->ep_in) )
|
||||
{
|
||||
if ( usbd_edpt_stalled(rhport, p_msc->ep_in) ) {
|
||||
usbd_edpt_clear_stall(rhport, p_msc->ep_in);
|
||||
send_csw(rhport, p_msc);
|
||||
}
|
||||
@ -634,84 +559,82 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
|
||||
|
||||
// return response's length (copied to buffer). Negative if it is not an built-in command or indicate Failed status (CSW)
|
||||
// In case of a failed status, sense key must be set for reason of failure
|
||||
static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_t* buffer, uint32_t bufsize)
|
||||
{
|
||||
(void) bufsize; // TODO refractor later
|
||||
static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_t* buffer, uint32_t bufsize) {
|
||||
(void)bufsize; // TODO refractor later
|
||||
int32_t resplen;
|
||||
|
||||
mscd_interface_t* p_msc = &_mscd_itf;
|
||||
|
||||
switch ( scsi_cmd[0] )
|
||||
{
|
||||
switch (scsi_cmd[0]) {
|
||||
case SCSI_CMD_TEST_UNIT_READY:
|
||||
resplen = 0;
|
||||
if ( !tud_msc_test_unit_ready_cb(lun) )
|
||||
{
|
||||
if (!tud_msc_test_unit_ready_cb(lun)) {
|
||||
// Failed status response
|
||||
resplen = - 1;
|
||||
resplen = -1;
|
||||
|
||||
// set default sense if not set by callback
|
||||
if ( p_msc->sense_key == 0 ) set_sense_medium_not_present(lun);
|
||||
if (p_msc->sense_key == 0) {
|
||||
set_sense_medium_not_present(lun);
|
||||
}
|
||||
}
|
||||
break;
|
||||
break;
|
||||
|
||||
case SCSI_CMD_START_STOP_UNIT:
|
||||
resplen = 0;
|
||||
|
||||
if (tud_msc_start_stop_cb)
|
||||
{
|
||||
scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd;
|
||||
if ( !tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject) )
|
||||
{
|
||||
if (tud_msc_start_stop_cb) {
|
||||
scsi_start_stop_unit_t const* start_stop = (scsi_start_stop_unit_t const*)scsi_cmd;
|
||||
if (!tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject)) {
|
||||
// Failed status response
|
||||
resplen = - 1;
|
||||
resplen = -1;
|
||||
|
||||
// set default sense if not set by callback
|
||||
if ( p_msc->sense_key == 0 ) set_sense_medium_not_present(lun);
|
||||
if (p_msc->sense_key == 0) {
|
||||
set_sense_medium_not_present(lun);
|
||||
}
|
||||
}
|
||||
}
|
||||
break;
|
||||
break;
|
||||
|
||||
case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
|
||||
resplen = 0;
|
||||
|
||||
if (tud_msc_prevent_allow_medium_removal_cb)
|
||||
{
|
||||
scsi_prevent_allow_medium_removal_t const * prevent_allow = (scsi_prevent_allow_medium_removal_t const *) scsi_cmd;
|
||||
if ( !tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control) )
|
||||
{
|
||||
if (tud_msc_prevent_allow_medium_removal_cb) {
|
||||
scsi_prevent_allow_medium_removal_t const* prevent_allow = (scsi_prevent_allow_medium_removal_t const*)scsi_cmd;
|
||||
if (!tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control)) {
|
||||
// Failed status response
|
||||
resplen = - 1;
|
||||
resplen = -1;
|
||||
|
||||
// set default sense if not set by callback
|
||||
if ( p_msc->sense_key == 0 ) set_sense_medium_not_present(lun);
|
||||
if (p_msc->sense_key == 0) {
|
||||
set_sense_medium_not_present(lun);
|
||||
}
|
||||
}
|
||||
}
|
||||
break;
|
||||
break;
|
||||
|
||||
|
||||
case SCSI_CMD_READ_CAPACITY_10:
|
||||
{
|
||||
case SCSI_CMD_READ_CAPACITY_10: {
|
||||
uint32_t block_count;
|
||||
uint32_t block_size;
|
||||
uint16_t block_size_u16;
|
||||
|
||||
tud_msc_capacity_cb(lun, &block_count, &block_size_u16);
|
||||
block_size = (uint32_t) block_size_u16;
|
||||
block_size = (uint32_t)block_size_u16;
|
||||
|
||||
// Invalid block size/count from callback, possibly unit is not ready
|
||||
// stall this request, set sense key to NOT READY
|
||||
if (block_count == 0 || block_size == 0)
|
||||
{
|
||||
if (block_count == 0 || block_size == 0) {
|
||||
resplen = -1;
|
||||
|
||||
// set default sense if not set by callback
|
||||
if ( p_msc->sense_key == 0 ) set_sense_medium_not_present(lun);
|
||||
}else
|
||||
{
|
||||
if (p_msc->sense_key == 0) {
|
||||
set_sense_medium_not_present(lun);
|
||||
}
|
||||
} else {
|
||||
scsi_read_capacity10_resp_t read_capa10;
|
||||
|
||||
read_capa10.last_lba = tu_htonl(block_count-1);
|
||||
read_capa10.last_lba = tu_htonl(block_count-1);
|
||||
read_capa10.block_size = tu_htonl(block_size);
|
||||
|
||||
resplen = sizeof(read_capa10);
|
||||
@ -720,14 +643,13 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
}
|
||||
break;
|
||||
|
||||
case SCSI_CMD_READ_FORMAT_CAPACITY:
|
||||
{
|
||||
case SCSI_CMD_READ_FORMAT_CAPACITY: {
|
||||
scsi_read_format_capacity_data_t read_fmt_capa =
|
||||
{
|
||||
.list_length = 8,
|
||||
.block_num = 0,
|
||||
.descriptor_type = 2, // formatted media
|
||||
.block_size_u16 = 0
|
||||
.list_length = 8,
|
||||
.block_num = 0,
|
||||
.descriptor_type = 2, // formatted media
|
||||
.block_size_u16 = 0
|
||||
};
|
||||
|
||||
uint32_t block_count;
|
||||
@ -737,14 +659,14 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
|
||||
// Invalid block size/count from callback, possibly unit is not ready
|
||||
// stall this request, set sense key to NOT READY
|
||||
if (block_count == 0 || block_size == 0)
|
||||
{
|
||||
if (block_count == 0 || block_size == 0) {
|
||||
resplen = -1;
|
||||
|
||||
// set default sense if not set by callback
|
||||
if ( p_msc->sense_key == 0 ) set_sense_medium_not_present(lun);
|
||||
}else
|
||||
{
|
||||
if (p_msc->sense_key == 0) {
|
||||
set_sense_medium_not_present(lun);
|
||||
}
|
||||
} else {
|
||||
read_fmt_capa.block_num = tu_htonl(block_count);
|
||||
read_fmt_capa.block_size_u16 = tu_htons(block_size);
|
||||
|
||||
@ -754,19 +676,18 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
}
|
||||
break;
|
||||
|
||||
case SCSI_CMD_INQUIRY:
|
||||
{
|
||||
case SCSI_CMD_INQUIRY: {
|
||||
scsi_inquiry_resp_t inquiry_rsp =
|
||||
{
|
||||
.is_removable = 1,
|
||||
.version = 2,
|
||||
.response_data_format = 2,
|
||||
.additional_length = sizeof(scsi_inquiry_resp_t) - 5,
|
||||
.is_removable = 1,
|
||||
.version = 2,
|
||||
.response_data_format = 2,
|
||||
.additional_length = sizeof(scsi_inquiry_resp_t) - 5,
|
||||
};
|
||||
|
||||
// vendor_id, product_id, product_rev is space padded string
|
||||
memset(inquiry_rsp.vendor_id , ' ', sizeof(inquiry_rsp.vendor_id));
|
||||
memset(inquiry_rsp.product_id , ' ', sizeof(inquiry_rsp.product_id));
|
||||
memset(inquiry_rsp.vendor_id, ' ', sizeof(inquiry_rsp.vendor_id));
|
||||
memset(inquiry_rsp.product_id, ' ', sizeof(inquiry_rsp.product_id));
|
||||
memset(inquiry_rsp.product_rev, ' ', sizeof(inquiry_rsp.product_rev));
|
||||
|
||||
tud_msc_inquiry_cb(lun, inquiry_rsp.vendor_id, inquiry_rsp.product_id, inquiry_rsp.product_rev);
|
||||
@ -776,20 +697,18 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
}
|
||||
break;
|
||||
|
||||
case SCSI_CMD_MODE_SENSE_6:
|
||||
{
|
||||
case SCSI_CMD_MODE_SENSE_6: {
|
||||
scsi_mode_sense6_resp_t mode_resp =
|
||||
{
|
||||
.data_len = 3,
|
||||
.medium_type = 0,
|
||||
.write_protected = false,
|
||||
.reserved = 0,
|
||||
.block_descriptor_len = 0 // no block descriptor are included
|
||||
.data_len = 3,
|
||||
.medium_type = 0,
|
||||
.write_protected = false,
|
||||
.reserved = 0,
|
||||
.block_descriptor_len = 0 // no block descriptor are included
|
||||
};
|
||||
|
||||
bool writable = true;
|
||||
if ( tud_msc_is_writable_cb )
|
||||
{
|
||||
if (tud_msc_is_writable_cb) {
|
||||
writable = tud_msc_is_writable_cb(lun);
|
||||
}
|
||||
|
||||
@ -800,26 +719,24 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
}
|
||||
break;
|
||||
|
||||
case SCSI_CMD_REQUEST_SENSE:
|
||||
{
|
||||
case SCSI_CMD_REQUEST_SENSE: {
|
||||
scsi_sense_fixed_resp_t sense_rsp =
|
||||
{
|
||||
.response_code = 0x70, // current, fixed format
|
||||
.valid = 1
|
||||
.response_code = 0x70, // current, fixed format
|
||||
.valid = 1
|
||||
};
|
||||
|
||||
sense_rsp.add_sense_len = sizeof(scsi_sense_fixed_resp_t) - 8;
|
||||
sense_rsp.sense_key = (uint8_t) (p_msc->sense_key & 0x0F);
|
||||
sense_rsp.add_sense_code = p_msc->add_sense_code;
|
||||
sense_rsp.add_sense_len = sizeof(scsi_sense_fixed_resp_t) - 8;
|
||||
sense_rsp.sense_key = (uint8_t)(p_msc->sense_key & 0x0F);
|
||||
sense_rsp.add_sense_code = p_msc->add_sense_code;
|
||||
sense_rsp.add_sense_qualifier = p_msc->add_sense_qualifier;
|
||||
|
||||
resplen = sizeof(sense_rsp);
|
||||
TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &sense_rsp, (size_t) resplen));
|
||||
|
||||
// request sense callback could overwrite the sense data
|
||||
if (tud_msc_request_sense_cb)
|
||||
{
|
||||
resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t) bufsize);
|
||||
if (tud_msc_request_sense_cb) {
|
||||
resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t)bufsize);
|
||||
}
|
||||
|
||||
// Clear sense data after copy
|
||||
@ -827,15 +744,15 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_
|
||||
}
|
||||
break;
|
||||
|
||||
default: resplen = -1; break;
|
||||
default: resplen = -1;
|
||||
break;
|
||||
}
|
||||
|
||||
return resplen;
|
||||
}
|
||||
|
||||
static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
|
||||
{
|
||||
msc_cbw_t const * p_cbw = &p_msc->cbw;
|
||||
static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) {
|
||||
msc_cbw_t const* p_cbw = &p_msc->cbw;
|
||||
|
||||
// block size already verified not zero
|
||||
uint16_t const block_sz = rdwr10_get_blocksize(p_cbw);
|
||||
@ -844,14 +761,13 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
|
||||
uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz);
|
||||
|
||||
// remaining bytes capped at class buffer
|
||||
int32_t nbytes = (int32_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len);
|
||||
int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len);
|
||||
|
||||
// Application can consume smaller bytes
|
||||
uint32_t const offset = p_msc->xferred_len % block_sz;
|
||||
nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, (uint32_t) nbytes);
|
||||
nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.ep_buf, (uint32_t)nbytes);
|
||||
|
||||
if ( nbytes < 0 )
|
||||
{
|
||||
if (nbytes < 0) {
|
||||
// negative means error -> endpoint is stalled & status in CSW set to failed
|
||||
TU_LOG_DRV(" tud_msc_read10_cb() return -1\r\n");
|
||||
|
||||
@ -859,30 +775,23 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
|
||||
set_sense_medium_not_present(p_cbw->lun);
|
||||
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}
|
||||
else if ( nbytes == 0 )
|
||||
{
|
||||
} else if (nbytes == 0) {
|
||||
// zero means not ready -> simulate an transfer complete so that this driver callback will fired again
|
||||
dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false);
|
||||
}
|
||||
else
|
||||
{
|
||||
TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) nbytes), );
|
||||
} else {
|
||||
TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.ep_buf, (uint16_t) nbytes),);
|
||||
}
|
||||
}
|
||||
|
||||
static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
|
||||
{
|
||||
msc_cbw_t const * p_cbw = &p_msc->cbw;
|
||||
static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) {
|
||||
msc_cbw_t const* p_cbw = &p_msc->cbw;
|
||||
bool writable = true;
|
||||
|
||||
if ( tud_msc_is_writable_cb )
|
||||
{
|
||||
if (tud_msc_is_writable_cb) {
|
||||
writable = tud_msc_is_writable_cb(p_cbw->lun);
|
||||
}
|
||||
|
||||
if ( !writable )
|
||||
{
|
||||
if (!writable) {
|
||||
// Not writable, complete this SCSI op with error
|
||||
// Sense = Write protected
|
||||
tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00);
|
||||
@ -891,16 +800,15 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
|
||||
}
|
||||
|
||||
// remaining bytes capped at class buffer
|
||||
uint16_t nbytes = (uint16_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len);
|
||||
uint16_t nbytes = (uint16_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len);
|
||||
|
||||
// Write10 callback will be called later when usb transfer complete
|
||||
TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, nbytes), );
|
||||
TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.ep_buf, nbytes),);
|
||||
}
|
||||
|
||||
// process new data arrived from WRITE10
|
||||
static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes)
|
||||
{
|
||||
msc_cbw_t const * p_cbw = &p_msc->cbw;
|
||||
static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes) {
|
||||
msc_cbw_t const* p_cbw = &p_msc->cbw;
|
||||
|
||||
// block size already verified not zero
|
||||
uint16_t const block_sz = rdwr10_get_blocksize(p_cbw);
|
||||
@ -910,10 +818,9 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3
|
||||
|
||||
// Invoke callback to consume new data
|
||||
uint32_t const offset = p_msc->xferred_len % block_sz;
|
||||
int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, xferred_bytes);
|
||||
int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.ep_buf, xferred_bytes);
|
||||
|
||||
if ( nbytes < 0 )
|
||||
{
|
||||
if (nbytes < 0) {
|
||||
// negative means error -> failed this scsi op
|
||||
TU_LOG_DRV(" tud_msc_write10_cb() return -1\r\n");
|
||||
|
||||
@ -924,32 +831,25 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3
|
||||
set_sense_medium_not_present(p_cbw->lun);
|
||||
|
||||
fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED);
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// Application consume less than what we got (including zero)
|
||||
if ( (uint32_t) nbytes < xferred_bytes )
|
||||
{
|
||||
uint32_t const left_over = xferred_bytes - (uint32_t) nbytes;
|
||||
if ( nbytes > 0 )
|
||||
{
|
||||
p_msc->xferred_len += (uint16_t) nbytes;
|
||||
memmove(p_msc->ep_buf, p_msc->ep_buf+nbytes, left_over);
|
||||
if ((uint32_t)nbytes < xferred_bytes) {
|
||||
uint32_t const left_over = xferred_bytes - (uint32_t)nbytes;
|
||||
if (nbytes > 0) {
|
||||
p_msc->xferred_len += (uint16_t)nbytes;
|
||||
memmove(_mscd_epbuf.ep_buf, _mscd_epbuf.ep_buf + nbytes, left_over);
|
||||
}
|
||||
|
||||
// simulate an transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter
|
||||
dcd_event_xfer_complete(rhport, p_msc->ep_out, left_over, XFER_RESULT_SUCCESS, false);
|
||||
}
|
||||
else
|
||||
{
|
||||
} else {
|
||||
// Application consume all bytes in our buffer
|
||||
p_msc->xferred_len += xferred_bytes;
|
||||
|
||||
if ( p_msc->xferred_len >= p_msc->total_len )
|
||||
{
|
||||
if (p_msc->xferred_len >= p_msc->total_len) {
|
||||
// Data Stage is complete
|
||||
p_msc->stage = MSC_STAGE_STATUS;
|
||||
}else
|
||||
{
|
||||
} else {
|
||||
// prepare to receive more data from host
|
||||
proc_write10_cmd(rhport, p_msc);
|
||||
}
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user