Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

revert rhport config in nxp mcus

Browse Source
This commit is contained in:
hathach 2020-06-30 16:18:43 +07:00
parent ab75998316
commit f3a88477dc
7 changed files with 20 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
hw/bsp/ea4357/ea4357.c
View File

@ -149,7 +149,7 @@ void board_init(void)
* status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down
* resistors are always active
*/
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST)
#if CFG_TUSB_RHPORT0_MODE
Chip_USB0_Init();
// // Reset controller
@ -185,7 +185,7 @@ void board_init(void)
* of VBUS can be read via U31.
* JP16 shall not be inserted.
*/
#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8)
#if CFG_TUSB_RHPORT1_MODE
Chip_USB1_Init();
// // Reset controller
@ -232,11 +232,11 @@ void USB0_IRQHandler(void)
void USB1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}

8
hw/bsp/mcb1800/mcb1800.c
View File

@ -43,11 +43,11 @@ void USB0_IRQHandler(void)
void USB1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}
@ -163,7 +163,7 @@ void board_init(void)
};
// USB0
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST)
#if CFG_TUSB_RHPORT0_MODE
Chip_USB0_Init();
// // Reset controller
@ -180,7 +180,7 @@ void board_init(void)
#endif
// USB1
#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8)
#if CFG_TUSB_RHPORT1_MODE
Chip_USB1_Init();
// // Reset controller

4
hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c
View File

@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void)
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}

4
hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c
View File

@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void)
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}

4
hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c
View File

@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void)
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}

8
hw/bsp/ngx4330/ngx4330.c
View File

@ -161,7 +161,7 @@ void board_init(void)
* status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down
* resistors are always active
*/
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST)
#if CFG_TUSB_RHPORT0_MODE
Chip_USB0_Init();
// // Reset controller
@ -197,7 +197,7 @@ void board_init(void)
* of VBUS can be read via U31.
* JP16 shall not be inserted.
*/
#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8)
#if CFG_TUSB_RHPORT1_MODE
Chip_USB1_Init();
// // Reset controller
@ -235,11 +235,11 @@ void USB0_IRQHandler(void)
void USB1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}

4
hw/bsp/teensy_40/teensy40.c
View File

@ -135,11 +135,11 @@ void USB_OTG1_IRQHandler(void)
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}