Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

stm32h7: Implement STALL logic for endpoints.

Browse Source
This commit is contained in:
William D. Jones 2019-09-03 01:05:26 -04:00
parent 28b131ea94
commit f703a74daa
1 changed files with 74 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
src/portable/st/stm32h7/dcd_stm32h7.c
View File

@ -320,13 +320,85 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
(void) ep_addr;
USB_OTG_DeviceTypeDef * dev = DEVICE_BASE;
USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE;
USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if(dir == TUSB_DIR_IN) {
// Only disable currently enabled non-control endpoint
if ( (epnum == 0) || !(in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPENA) ){
in_ep[epnum].DIEPCTL |= (USB_OTG_DIEPCTL_SNAK | USB_OTG_DIEPCTL_STALL);
} else {
// Stop transmitting packets and NAK IN xfers.
in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SNAK;
while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_INEPNE) == 0);
// Disable the endpoint.
in_ep[epnum].DIEPCTL |= (USB_OTG_DIEPCTL_STALL | USB_OTG_DIEPCTL_EPDIS);
while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_EPDISD_Msk) == 0);
in_ep[epnum].DIEPINT = USB_OTG_DIEPINT_EPDISD;
}
// Flush the FIFO, and wait until we have confirmed it cleared.
USB_OTG_FS->GRSTCTL |= ((epnum - 1) << USB_OTG_GRSTCTL_TXFNUM_Pos);
USB_OTG_FS->GRSTCTL |= USB_OTG_GRSTCTL_TXFFLSH;
while((USB_OTG_FS->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH_Msk) != 0);
} else {
// Only disable currently enabled non-control endpoint
if ( (epnum == 0) || !(out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPENA) ){
out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_STALL;
} else {
// Asserting GONAK is required to STALL an OUT endpoint.
// Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt
// anyway, and it can't be cleared by user code. If this while loop never
// finishes, we have bigger problems than just the stack.
dev->DCTL |= USB_OTG_DCTL_SGONAK;
while((USB_OTG_FS->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF_Msk) == 0);
// Ditto here- disable the endpoint.
out_ep[epnum].DOEPCTL |= (USB_OTG_DOEPCTL_STALL | USB_OTG_DOEPCTL_EPDIS);
while((out_ep[epnum].DOEPINT & USB_OTG_DOEPINT_EPDISD_Msk) == 0);
out_ep[epnum].DOEPINT = USB_OTG_DOEPINT_EPDISD;
// Allow other OUT endpoints to keep receiving.
dev->DCTL |= USB_OTG_DCTL_CGONAK;
}
}
}
void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
(void) ep_addr;
USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE;
USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if(dir == TUSB_DIR_IN) {
in_ep[epnum].DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
uint8_t eptype = (in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPTYP_Msk) >> \
USB_OTG_DIEPCTL_EPTYP_Pos;
// Required by USB spec to reset DATA toggle bit to DATA0 on interrupt
// and bulk endpoints.
if(eptype == 2 || eptype == 3) {
in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
}
} else {
out_ep[epnum].DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
uint8_t eptype = (out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPTYP_Msk) >> \
USB_OTG_DOEPCTL_EPTYP_Pos;
// Required by USB spec to reset DATA toggle bit to DATA0 on interrupt
// and bulk endpoints.
if(eptype == 2 || eptype == 3) {
out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
}
}
}
/*------------------------------------------------------------------*/