hathach
3b7d5aa042
improve connection & disconnection detection. But there is still issue when CONDETIRQ occurs but we are disabled interrupt (for osal queue access).
2023-08-31 16:52:09 +07:00
hathach
41493426b3
use ep buf to keep setup packet, work well with hid device
2023-08-30 16:21:43 +07:00
hathach
1ab488eb06
call xfer_complete_isr() when result is not successful (stalled or failed)
2023-08-30 16:04:18 +07:00
hathach
2a814a99af
- hcd_setup_send() also check for busy flag
...
- xact_inout() to support send setup
2023-08-29 20:27:37 +07:00
hathach
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
hathach
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
hathach
502b1bdda6
more update to transaction
2023-08-27 23:45:34 +07:00
hathach
cd7464a884
try next endpoint when received NAK
2023-08-25 17:37:09 +07:00
hathach
ac00b91472
add xact_out(), xact_in() to manage transfer
2023-08-25 17:26:57 +07:00
hathach
ecf2f91042
use endpoint pool for more flexible multiple devices support
2023-08-25 16:36:28 +07:00
hathach
09ceaa6cf3
add osal mutex for spi
2023-08-25 13:18:47 +07:00
hathach
f5ebc1700f
add spi lock with interrupt enable/disable
2023-08-25 12:12:44 +07:00
hathach
e6cf125e53
save data toggle, always retry NAK. work with msc device
2023-08-24 16:46:20 +07:00
hathach
344932d27e
add tuh_max3421e_int_api(), retry control if received NAK
2023-08-24 16:27:47 +07:00
hathach
3ed5d6c372
complete enumeration
2023-08-24 16:27:12 +07:00
hathach
2c237b1ae4
able to complete 1st get device descriptor and set address
2023-08-23 17:49:28 +07:00
hathach
e3f3179924
able to get 8 byte descriptor, but read(RCVBC) always return 0
...
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
hathach
274578ff46
able to send setup packet
2023-08-22 23:17:12 +07:00
hathach
b413439416
able to detect new device and start enumerating
2023-08-22 19:57:59 +07:00
hathach
cacc96b25d
adding connection event handling, add nrf gpio interrupt for max2341e interrupt pin
2023-08-18 17:39:10 +07:00
hathach
824e585e2b
ground works for hcd max3421e
2023-08-18 14:07:38 +07:00
hathach
9257a0f562
- update nrf52 bsp for cmake
...
- add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled
- add hcd_template.c
2023-08-18 12:48:12 +07:00
hathach
f4845e4e6c
minor comment
2023-08-16 14:43:58 +07:00
hathach
0109ffbdcb
fix abort transfer does not release endpoint, also reset state if it is control transfer
2023-08-16 14:31:14 +07:00
hathach
b3c7fe1023
clear qhd halted bit if not caused by STALL protocol, allow for next transfer
2023-08-16 11:12:00 +07:00
Ha Thach
7537985c08
Merge pull request #2222 from rppicomidi/fix-2188
...
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-15 23:33:19 +07:00
hathach
67a374d932
more rename
2023-08-15 22:57:05 +07:00
hathach
1b33a31536
more minor clean up
...
- also rename usbh_classdriver.h to usbh_pvt.h to consitent with usbd
2023-08-15 22:54:07 +07:00
rppicomidi
9d94296741
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-14 15:38:48 -07:00
tswan-quasi
b5ba12119d
UINT16_MAX stdint macro usage
2023-08-14 09:01:30 -04:00
tswan-quasi
bd51afb091
min on cdc r/w
2023-08-14 08:49:52 -04:00
Ha Thach
92457ec99f
Merge pull request #2202 from Rocky04/patch-4
...
Invoke unmounted state on configuration reset
2023-08-09 20:48:26 +07:00
Ha Thach
04f0cd5c80
Merge pull request #2209 from HiFiPhile/hitl
...
Enhance HITL test
2023-08-09 20:20:46 +07:00
hathach
b8b01c1075
update to dcd ip3511 to add work-around for lpc54628 usb hs errata USB.1 and USB.2
...
msc is mounted, but device couldn't work reliably and got constant reset
due to other errata probably.
2023-08-09 12:47:24 +07:00
hathach
6d877c3170
added cmake for lpc54, update lpc55
2023-08-08 18:50:24 +07:00
Rocky04
9602c06f8d
Correcting comments
2023-08-07 21:25:50 +02:00
Rocky04
c959e65edd
Fixing wrong callback placement
2023-08-07 21:16:41 +02:00
hathach
4938971aad
code format
2023-08-07 20:48:09 +07:00
hathach
18646179d0
fix host msc get maxlun not using aligned section memory
2023-08-07 20:48:08 +07:00
hathach
1f95a417f2
Add tuh_rhport_is_active() and tuh_rhport_reset_bus()
...
- also improve ehci bus reset
- seperate bus reset delay and contact debouncing delay in enumeration
2023-08-07 20:48:07 +07:00
Aladdin Bakosh
56e52037a8
clean(ra_hcd): fix typos in the hcd library
2023-08-04 12:00:25 +02:00
Ha Thach
1b04db2a77
Merge branch 'master' into master
2023-08-04 11:48:04 +07:00
hathach
ef5bd9ee6c
Merge branch 'master' into enhance-bsp
2023-08-04 00:31:12 +07:00
Ha Thach
6d03bb9ffc
Merge pull request #2052 from arduino/renesas_ra_hs_rebased
...
Renesas_RA: add support for board with HS USB port
2023-08-03 20:41:13 +07:00
hathach
a160da1f2b
add lpc43 family
2023-08-03 17:19:47 +07:00
hathach
473f37df95
add osal queue name if needed
...
also mass change configQUEUE_REGISTRY_SIZE = 4
2023-08-03 12:05:21 +07:00
hathach
de8faf8664
Merge branch 'master' into pr2091
2023-08-03 11:09:33 +07:00
hathach
d09604d636
Revert "Name queues for easier FreeRTOS debugging with task- and queue-aware debuggers"
...
This reverts commit 11fba59319d81fb9502fbf399abb4fe27cf3fa29.
2023-08-03 11:07:23 +07:00
Rocky04
9560d0813f
Set unmounted on configuration reset
2023-08-02 15:25:08 +02:00
hathach
979bf32266
default class driver log level to CFG_TUH/TUD_LOG_LEVEL allow application to selectively disable usbd/usbh or driver log
2023-08-02 15:34:18 +07:00
