Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-17 05:32:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
3,636 Commits 10 Branches 15 Tags
Commit Graph

3636 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
hathach
f82655a212
correct EP Size for cdc dual and webusb example 2020-07-06 18:55:31 +07:00
Ha Thach
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs 
Add stm hs
 2020-07-05 14:07:08 +07:00
Uwe Bonnes
8f433e67ac Add stm32l4r5nucleo. USB and UARTwork. 
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
 2020-07-03 16:34:08 +02:00
Uwe Bonnes
11c6d4cdae stlinkv3mini: Only OTG_HS has connector. 2020-07-03 10:59:02 +02:00
Uwe Bonnes
5c24d5ca72 stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug. 2020-07-03 10:53:51 +02:00
Uwe Bonnes
4b7539bd63 stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet. 2020-07-03 10:53:51 +02:00
Uwe Bonnes
fd38178189 STM32/OTG_HS: Allow OTG_HS port to run at FS speed. 
Add "REDUCE_SPEED=1" to the compile options.
 2020-07-03 10:52:57 +02:00
hathach
ad5ae8c31d
update per review 2020-07-03 14:50:39 +07:00
hathach
a09a86d299
fix NVIC disable typo 2020-07-03 01:19:02 +07:00
me-no-dev
d493724a7b ESP32-S2: Detect EP IN Xfer Timeout 
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
 2020-07-02 13:05:17 +03:00
hathach
4cec866994
correct HSE_VALUE in hal_conf 
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
 2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
 2020-07-02 11:58:40 +07:00
hathach
4966fb2e13 clean up 2020-07-02 01:25:21 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Ha Thach
961d813953
Merge pull request #455 from UweBonnes/add-stm-hs 
Add stm hs
 2020-07-01 23:52:27 +07:00
Uwe Bonnes
5b3a67a1e2 Add bsp for stlinkv3mini. 2020-07-01 15:42:53 +02:00
Uwe Bonnes
196bdbc702 st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now 
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
 2020-07-01 14:45:07 +02:00
hathach
d2450abaaf only set turnaround in reset complete 2020-07-01 18:51:04 +07:00
hathach
e3974d6869 correctly set turn around according to cpu clock 
help to run with low speed mcu
 2020-07-01 18:44:52 +07:00
hathach
77315ba7ce added uart for h743 2020-07-01 18:27:48 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
hathach
ed1b670c55 clean up code 2020-07-01 17:57:37 +07:00
me-no-dev
6178f8de2f ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs 
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
 2020-07-01 13:38:59 +03:00
Ha Thach
0c9932440b
Merge pull request #452 from hathach/fix-dfu-rt 
Fix dfu rt
 2020-07-01 15:24:39 +07:00
Ha Thach
ea67aee75b
Update README.md 2020-07-01 13:19:06 +07:00
Ha Thach
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs 
Add stm hs
 2020-07-01 13:09:07 +07:00
Ha Thach
383f8047a5
Merge pull request #453 from hathach/add-da14695-usb 
Add da14695 usb
 2020-07-01 13:02:16 +07:00
hathach
463e978134 added DA14695 DK USB bsp 2020-07-01 12:47:14 +07:00
hathach
2f946e765d rename file 2020-07-01 12:42:12 +07:00
hathach
12a145b27d fix dfu-rt to response to SET_INTERFACE and DFU_GETSTATUS 
fix #450
 2020-07-01 01:33:02 +07:00
Ha Thach
e4391c32a6
Merge pull request #451 from duempel/fix_synopsys_short_packet 
Fix receiving of short packet data (Synopsys)
 2020-07-01 00:11:21 +07:00
hathach
400c2d2e50 correct led dfu_rt example 
also add example usage note
 2020-06-30 23:26:51 +07:00
Jan Dümpelmann
378e6aab8c Clear ep0_pending if rx short packet 2020-06-30 17:56:25 +02:00
Jan Dümpelmann
9e35ef73f7 Fix receiving of short packet data (ep out) 2020-06-30 12:55:39 +02:00
hathach
0477446224 more clean up 2020-06-30 16:31:59 +07:00
hathach
f3a88477dc revert rhport config in nxp mcus 2020-06-30 16:18:43 +07:00
Uwe Bonnes
30a18e2605 stm32f723disco: USB HS enumerates. 2020-06-30 11:07:53 +02:00
Uwe Bonnes
62239bb576 cdc-acm: Use 512 bytes when in HS mode. 
Removes error:
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
while enumerationg.
 2020-06-30 11:02:41 +02:00
Uwe Bonnes
05bfd9ac4a dcd_synopsys: Handle HS and FS IP in one device 
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file

F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
 2020-06-30 11:02:41 +02:00
Uwe Bonnes
f6660c39a1 Add Stm32F7xxdisco board support files 
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco        => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco        => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco        => Hangs during enumeration
 2020-06-30 11:02:38 +02:00
Uwe Bonnes
4b7f848e1f stm32h743nucleo: Enable Log via STLINK-VCP. 2020-06-30 11:01:44 +02:00
hathach
ab75998316 Merge branch 'master' into add-stm-hs 2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support 
Support for DA1469x MCU from Dialog Semiconductor
 2020-06-30 01:20:56 +07:00
Ha Thach
2b9466dbc0
Merge pull request #445 from hathach/add-kaluga-bsp 
added esp32s2 kaluga bsp
 2020-06-29 19:16:09 +07:00
hathach
2dff40236c add kaluga files 2020-06-29 18:40:23 +07:00
hathach
00104894dc update ci 2020-06-29 18:07:34 +07:00
hathach
50b569ad1b added esp32s2 kaluga bsp 2020-06-29 16:52:08 +07:00
Ha Thach
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive 
Improvements to Synopsys EP OUT
 2020-06-29 16:02:40 +07:00
Jerzy Kasenberg
8e143fc962 Add board support for Dialog DA1469x-dk-pro 
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
 2020-06-29 11:02:32 +02:00
Jan Dümpelmann
99df7789a7 Add author name to dcd_synopsys.c 2020-06-29 10:55:03 +02:00