Reinhard Panhuber
9ddcfc09d7
Fix wrong comments, rename pos to offset, rename overflow().
2020-09-25 15:58:28 +02:00
Reinhard Panhuber
52c9a467b4
Fix bug in modulo substitute.
2020-09-23 21:36:30 +02:00
Reinhard Panhuber
9bdeafb295
Change maximum depth to 2^15 which allows for a fast modulo substitute.
...
Thus, however, overflows are detectable only for one time FIFO depth.
2020-09-23 20:48:03 +02:00
Ha Thach
8b2c822557
Merge pull request #512 from mzero/fix-midi-sysex
...
Fix a bug in writing SysEx messages.
2020-09-23 11:23:53 +07:00
Reinhard Panhuber
21299f90fa
Final cleanup.
2020-09-19 11:46:43 +02:00
Reinhard Panhuber
9dfb78e9d8
Tested, working.
2020-09-15 20:40:41 +02:00
Jerzy Kasenberg
62a76c0e04
nrf52: Fix edpt_dma_start() wrong condition check
...
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.
This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
Ha Thach
745c15d5b5
Merge pull request #508 from hathach/fix-edpt-race
...
Fix edpt xfer race condition
2020-09-14 23:56:21 +07:00
Reinhard Panhuber
349c0f640e
Implementation done, yet to be tested.
2020-09-14 18:24:08 +02:00
hathach
9c0d15fc43
more const
2020-09-14 22:23:59 +07:00
hathach
23e6ee2ea2
cdc device: claim endpoint before checking fifo availability
...
- add pre-check to reduce mutex lock in usbd_edpt_claim
2020-09-14 22:14:31 +07:00
Mark Lentczner
3b0216d3bf
Update midi_device.c
...
Fix a bug in writing SysEx messages.
At the start of a new USB packet (4 bytes), while in the middle of a SysEx, the code mistakenly
set the buffer length to 4, not the target length. As a consequence, the 3rd and 4th bytes from
the last packet were included, after every byte of the SysEx after the first packet of three.
The fix is simple, as it was just a typo, as can bee seen from the other branches in the same
section of if/else statements: At the start of a new packet, the code should set up the target
length... the buffer length should be left at 2 (as set on line 180).
2020-09-13 15:05:18 -07:00
hathach
5931d19666
correct the TUD_HID_REPORT_DESC_GAMEPAD
2020-09-13 15:01:20 +07:00
hathach
1804dba615
typo
2020-09-12 08:48:49 +07:00
hathach
ce4a9b9c3a
clean up
2020-09-11 00:14:07 +07:00
hathach
801f8b5b38
update claim edpt for hid and midi
2020-09-10 23:32:08 +07:00
Jan Dümpelmann
b15c209805
Set new define because of build failure
2020-09-10 13:36:07 +02:00
hathach
ed6d48b81e
typo
2020-09-09 16:45:54 +07:00
hathach
fe1b5dfa23
clean up
2020-09-09 16:29:45 +07:00
hathach
33f0a18523
update cdc edpt read
2020-09-09 16:25:31 +07:00
hathach
8b9893cada
introduce optional usbd_edpt_claim, usbd_edpt_release which can be used to gain exclusive access to usbd_edpt_xfer
2020-09-09 15:48:11 +07:00
hathach
2b54dcb9f6
move functions around
2020-09-07 15:39:46 +07:00
hathach
7a3b24827e
clean up
2020-09-07 15:25:03 +07:00
hathach
66a10ec9c8
rework usbh control transfer
...
use series of complete callback instead of blocking semaphore, which is
more noOS friendly. still working with hid host
2020-09-07 15:19:20 +07:00
Reinhard Panhuber
4e789b240d
Start of sampling works.
2020-09-06 11:37:59 +02:00
hathach
b3e81673c0
change xfer_cb return type from void to bool
2020-09-06 12:11:07 +07:00
hathach
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
hathach
9a6d7c648e
clean up enum task
2020-09-05 21:12:43 +07:00
hathach
828f720207
refactor hub class
...
- separate connect/disconnect handling
- hub work with full speed, but doesn't seem to work with Low speed
device (with mcb1800)
- need to update msc host after migrating from isr to xfer_cb (blocked
at inquiry)
2020-09-05 20:20:45 +07:00
hathach
7ffb6acc16
more clean up
2020-09-05 17:16:46 +07:00
hathach
b8b95e8494
add in_isr to all hcd event functions
2020-09-05 15:46:50 +07:00
hathach
90c8c14652
clean up
2020-09-05 15:19:01 +07:00
hathach
bc09b6065f
refactor extract parse_configuration_descriptor()
2020-09-05 15:16:45 +07:00
hathach
d87f2a9691
remove usbh control mutex
2020-09-05 15:05:25 +07:00
hathach
9531e47d10
update example to test with mouse
2020-09-05 14:59:07 +07:00
hathach
f7cf8cdf27
defer xfer_isr to xfer_cb
2020-09-05 14:41:31 +07:00
hathach
4d57b4ea33
clean up
2020-09-05 13:57:07 +07:00
Reinhard Panhuber
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
Jan Dümpelmann
9cc22b635c
Add functionality to abort an ongoing transfer
2020-09-04 15:40:23 +02:00
hathach
a8e538efe7
clean up
2020-09-04 01:35:32 +07:00
hathach
35aee4a6af
more hid host work
2020-09-03 23:57:51 +07:00
Reinhard Panhuber
338e96fa82
Remove tud_audio_n_write_ep_in_buffer() as long as ISO EPs are not RBs.
2020-09-03 18:09:46 +02:00
Jan Dümpelmann
4071e490e2
New function to modify fifo overwritability
2020-09-03 17:21:32 +02:00
Jan Dümpelmann
fd6cf9010b
Turn transmit fifo overwritable in no DTR mode
2020-09-03 17:03:13 +02:00
Jan Dümpelmann
d9eaa54e14
Remove connected check for write flushing
2020-09-03 16:40:53 +02:00
hathach
ef651e0734
fix #449 remove obsolete pipehandle from hid host
2020-09-03 17:07:29 +07:00
hathach
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
hathach
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
hathach
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
Reinhard Panhuber
8f0693346c
Allow epin_buf to be written directly into in case no TX FIFOs are used.
...
This is helpful if you have already encoded audio data and want an
efficient way to send it. However, this approach is NOT THREADSAFE so
far and works realiably ONLY IF tud_audio_n_write_ep_in_buffer() is NOT
called form an interrupt!
2020-09-01 11:26:16 +02:00
