hathach
dbd31895bc
change usage of TU_CHECK_MCU() to prevent macro conflict
2021-10-25 17:04:03 +07:00
hathach
85e18b9172
house keeping
2021-10-25 15:58:12 +07:00
hathach
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
Tod Kurt
9f014b059a
properly handle Program Change and Channel Aftertouch messages
2021-10-25 00:07:59 -07:00
hathach
a0202df920
add TU_ARGS_APPLY(), TU_CHECK_MCU() now could check list of mcus
2021-10-25 13:49:59 +07:00
hathach
61c80840c3
update dwc int enable/disable
2021-10-25 00:40:21 +07:00
hathach
4ab931a361
more clean up
2021-10-25 00:23:18 +07:00
hathach
0e7c103e98
minor rename
2021-10-25 00:11:17 +07:00
hathach
32742571da
switch gd32 and stm32f4 to use new dwc2 driver
2021-10-25 00:06:57 +07:00
hathach
06de6b725c
adding generalized dwc2 driver
2021-10-24 23:24:46 +07:00
Ha Thach
55e0b5882a
Merge pull request #1160 from cr1901/msp-fix
...
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incre…
2021-10-24 17:28:11 +07:00
hathach
109b7a6661
more wMaxPacketSize
2021-10-24 14:39:02 +07:00
hathach
5af989384b
remove ep descriptor wMaxPacketSize bitfield due to endian issue
2021-10-24 13:11:21 +07:00
hathach
6f5b197a98
indent
2021-10-24 08:44:58 +07:00
William D. Jones
07c74c76d0
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incrementing past unsent data.
2021-10-23 14:04:44 -04:00
Ha Thach
311c05b401
Merge branch 'master' into fix-warnings
2021-10-23 21:23:56 +07:00
Ha Thach
b541c0f5e0
Merge pull request #1150 from kkitayam/change_input_terminal_type_to_camera
...
UVC example: change input terminal type to camera from external
2021-10-23 20:48:52 +07:00
Scott Shawcroft
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
Scott Shawcroft
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
hathach
5e437ee186
pi cm4 enumerated as full speed device
2021-10-22 21:55:15 +07:00
kkitayam
b3b6b4f785
Update _negotiate_streaming_parameters() to handle some requests
2021-10-19 21:49:00 +09:00
Ha Thach
4bfab30c02
Merge pull request #1139 from hathach/release-0.12.0
...
update changelog and increase version for 0.12.0
2021-10-19 13:27:53 +07:00
kkitayam
4fd0ee4eef
Implement GET_DEF and GET_LEN handling on Probe/Commit entities of streaming interface
2021-10-18 21:53:38 +09:00
hathach
6fcf4bee8c
suppress null-dereference by usbh and lwip
2021-10-18 11:42:00 +07:00
hathach
a7dd5b616c
fix -Wnull-dereference in midi_device
2021-10-18 01:11:27 +07:00
hathach
826b34a8ac
enable -Wnull-dereference
2021-10-18 00:13:40 +07:00
hathach
099d3b377f
add volatile to EPx_REGS for -Wcast-qual
...
since gcc does difference between volatile struct and member when
casting pointer
2021-10-17 17:33:14 +07:00
hathach
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
hathach
a5f516893b
more with -Wcast-qual
2021-10-17 16:36:53 +07:00
kkitayam
7325dd6335
Change input terminal type to camera
2021-10-16 12:06:13 +09:00
hathach
0b249618b0
fix -Wcast-qual
2021-10-15 23:54:31 +07:00
Jerzy Kasenberg
bf4b133084
dcd_da146xx: Drop unexpected data
...
USB3CV tool verifies MSC device by sending too short or
too long packets.
In case of too long packets (msc_device requested 31 bytes
but incoming data had 32 bytes) extra byte(s) were left in
FIFO resulting in some data mismatch later on.
Now if more data is received in packet that expected extra
bytes are just dropped.
2021-10-15 12:02:15 +02:00
Jerzy Kasenberg
49aa0b72a8
dcd_da146xx: Fix EPIN stall notification handling
...
Normal TX handler for IN non-0 endpoints is called during
outgoing transfer or just after it was finished.
It may need to fill TX fifo with same data if TX_DONE is present
but ACK_STAT is not.
It may need to fill more data when called during transfer.
But it may also be called when STALL was sent.
In this case TX_DONE is set ACK_STAT is not, just like for packets
that were sent but no ACK was received.
Code was trying to send something again. There was nothing to send
so empty ZLP was scheduled for stalled endpoint.
This ZLP was later send to host where valid response was required.
This change checks if notification was for STALL endpoint and
does not try to fill TX FIFO in that case.
2021-10-15 12:02:15 +02:00
hathach
7596cb3079
update some sense warning from -Wconversion
2021-10-15 15:54:32 +07:00
graham sanderson
06d9555389
More warning cleanup
...
- physically suppress warnings in TinyUSB headers using pragmas so they don't break -Werror compilation of external files that include them
- fix compiler warnings in rp2040 port
- add cmake method to rp2040 port to allow an external project to suppress warnings in TinyUSB itself
2021-10-14 15:23:26 -05:00
graham sanderson
7667299b48
Remove compiler warning
2021-10-14 12:13:39 -05:00
kkitayam
2a795d5fd0
Fix GUID of video compression formats
2021-10-14 23:15:35 +09:00
hathach
5cfe293001
update changelog and increase version for 0.12.0
2021-10-13 17:32:34 +07:00
Ha Thach
9da234cd7c
Merge pull request #1101 from kasjer/kasjer/da146xx-bus-reset-sleep
...
da146xx bus reset and sleep reworked
2021-10-13 16:33:54 +07:00
Scott Shawcroft
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
Ha Thach
379537cb6d
Merge branch 'master' into add_uvc
2021-10-12 22:01:02 +07:00
kkitayam
67f1603833
Fix a typo
2021-10-12 23:35:19 +09:00
hathach
4d9e44e09c
more rename
2021-10-12 01:12:26 +07:00
hathach
7afcb1e5d5
minor code clean up without functionality changes
2021-10-12 00:56:20 +07:00
hathach
4d170614dc
rename some video constants
2021-10-11 23:18:24 +07:00
hathach
b3bfce2cb7
update the descriptor endpoint ISO for nrf5x
2021-10-11 16:07:34 +07:00
Ha Thach
ecec0370ca
Merge pull request #1107 from majbthrd/add_ncm
...
add NCM driver in a compatible manner : hathach/tinyusb#550
2021-10-11 15:57:46 +07:00
hathach
a6723f556d
add ncm.h for magic number
...
mostly clean up magic number
2021-10-11 12:36:03 +07:00
hathach
a8eea9f6a5
add backward compatible with warnings for CFG_TUD_NET
2021-10-09 11:28:55 +07:00
Gordon McNab
5e6edecaa3
Streamline settings for board.
2021-10-07 17:00:28 +01:00
