Jerzy Kasenberg
21db2351fd
nrf5x: Fix race condition during startup
...
When NRF5x device is reset by software (after DFU for example),
power event is ready from the beginning.
When power interrupt is triggered before tud_init() finished
USBD_IRQn is enabled before it would be enabled in tud_init().
This in turn may result in BUS RESET event being sent from
USB interrupt to USB task when queue is not initialized yet.
This scenario often happens in Mynewt build where queue creation
takes more time.
To prevent this scenario USBD_IRQn is not enabled in power event
interrupt handler before dcd_init() was called.
2021-12-08 08:27:27 +01:00
hathach
3e3fe1e429
improve hcd_device_close() for rp2040
2021-11-30 17:36:52 +07:00
rppicomidi
006522e437
on unplug release device endpoints
2021-11-30 17:17:06 +07:00
rppicomidi
06f99c220e
implement hcd device close
2021-11-30 17:17:06 +07:00
hathach
ab223eb1df
correct 32 button in gamepad hid descriptor template
2021-11-29 13:07:46 +07:00
hathach
c9e9f4785f
more clean up
2021-11-23 09:52:11 +07:00
hathach
0fc11746c0
clean up
2021-11-23 09:46:45 +07:00
hathach
a994540860
fix nrf easy dma race condition
2021-11-23 09:36:28 +07:00
Ha Thach
b8d66e4d19
Merge pull request #1206 from hathach/bcm-dwc2-address
...
Bcm dwc2 address
2021-11-22 12:07:07 +07:00
hathach
dac7574c98
use USB_OTG_GLOBAL_BASE instead of hard code value
2021-11-22 10:52:28 +07:00
hathach
301d6b4133
clean up
2021-11-17 09:48:08 +07:00
hathach
12e96ce571
set DCFG_XCVRDLY when using external ULPI highspeed phy
2021-11-15 12:18:28 +07:00
hathach
d415bd4d7b
add missing musb type file
2021-11-08 17:39:37 +07:00
hathach
f65917f51a
rename to simply OPT_MCU_MSP432E4, add msp432e to ci
2021-11-08 17:29:26 +07:00
hathach
6fea50f735
musb work well with tm4c123
2021-11-08 16:41:29 +07:00
hathach
23e6e0ef33
merge pull request 670 for tm4c123gxl bsp
2021-11-08 16:41:29 +07:00
kkitayam
26461d1efe
Fix DCD_EVENT_XFER_COMPLETE was signaled, even after EP is closed
2021-11-07 18:25:11 +09:00
kkitayam
0b3c8c4a59
Implement dcd_edpt_xfer_fifo for dcd_musb
2021-11-06 00:06:27 +09:00
kkitayam
50ca0dda2c
Add dcd_musb.c
2021-11-06 00:06:26 +09:00
kkitayam
f183d0810b
Add files for msp432e4
2021-11-06 00:06:26 +09:00
Ha Thach
ab760290a5
Merge pull request #1181 from liamfraser/rp2040-hcd-assert-fix
...
Fix invalid assert in RP2040 host mode when compiled in debug mode
2021-11-05 21:40:42 +07:00
Jerzy Kasenberg
d20a5b3a09
bth: Add IAD to BT descriptor
...
Bluetooth's specification defines IAD for primary controller.
While it seems that Windows and Linux can leave without this,
there is no reason TinyUSB should not provide it.
2021-11-05 13:03:31 +01:00
Jerzy Kasenberg
ec8ece2c9d
bth: Update driver to interface association changes
...
Two interfaces that are required by Bluetooth Primary Controller
do not have IAD according to Bluetooth specification.
Those two interfaces were opened separately in process_set_config().
Later interface association was inferred for BTH (along with other
drivers), since then only one call to open() is place for BTH driver
that should prepare both interfaces at once.
To make it work again btd_open() parses two interfaces at once.
2021-11-05 12:33:15 +01:00
Liam Fraser
e692fa9ae4
RP2040 HCD: Move invalid ep->active assert in hw_trans_complete. The check for ep->active should only happen if a setup packet was just sent. Otherwise the transaction is handled in hw_handle_buff_status.
2021-11-05 09:39:31 +00:00
Ha Thach
c04006bc13
Merge pull request #1180 from hathach/add-xmc4500
...
Add xmc4500
2021-11-05 14:38:23 +07:00
hathach
d87a897a7b
xmc4500 ported, cdc msc example run fine
2021-11-05 13:13:21 +07:00
hathach
a3fc107d94
xmc4500 led blinky, button ok
2021-11-05 11:57:36 +07:00
Jerzy Kasenberg
e35bb6341c
broadcom/dcd: Fix mynewt build
...
dcd_synopsys.c included broadcom/interrupts.h before
preprocessor check whether file should be used.
Since mynewt build does not include all folders it resulted in build
error.
Now offending include is moved few lines after preprocessor check.
2021-11-04 21:46:17 +01:00
hathach
f90f5ea369
adding g4 family with g474nucleo, able to blink led and button
2021-11-04 16:16:51 +07:00
Ha Thach
fc59515bfd
Merge pull request #1163 from hathach/generalize-synopsys-dwc2
...
Generalize synopsys dwc2
2021-11-04 13:41:25 +07:00
hathach
6cfdf697eb
add hint/question with ISB
2021-11-04 12:42:28 +07:00
hathach
b51d038b65
fix issue with bcm2711 caching issue by ading ISB() after dwc2_dcd_int_enable90
...
also add hwcfg_list for reference
2021-11-04 12:30:11 +07:00
hathach
e16506cb52
clean up
2021-11-03 12:24:10 +07:00
hathach
7e68894726
grouping stm32L4 family in bsp
2021-11-02 16:10:40 +07:00
hathach
b809429873
minor clean up
2021-11-02 14:51:15 +07:00
hathach
aa682d7301
add fix for stm32l4 (version 3.10a) which generate transfer complete when setup recieved and control out data complete
2021-11-02 13:52:30 +07:00
Ha Thach
9245b8f89f
Merge pull request #1164 from suda-morris/refactor/update_include_header_esp32xx_dcd
...
update dcd_esp32sx with correct include list
2021-11-01 15:24:51 +07:00
hathach
215e0595ab
change F207 to use new dwc2
2021-10-31 00:09:40 +07:00
hathach
b85a6898af
remove dcd_efm32
2021-10-30 20:45:58 +07:00
hathach
9cd5a87c64
add support for EFM32GG
...
merge GG12 GG12 to simply OPT_MCU_EFM32GG
2021-10-30 20:42:55 +07:00
hathach
660e8b8c88
skip snpsid check for gd32, abstract phyfs turnaround, set max timeout calibration.
...
still has issue with gd32 with msc (does work with running with rtt as
log).
2021-10-29 16:08:19 +07:00
hathach
6c67fc4125
correctly init hs phy for bcm
2021-10-29 00:53:30 +07:00
hathach
7def380058
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 12:52:18 +07:00
hathach
49aa69a301
update bcm dcd
2021-10-26 23:57:48 +07:00
hathach
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
hathach
9f1cd1a753
add synopsys id check, rename GCCFG_* to STM32_GCCFG-*
2021-10-26 23:10:26 +07:00
hathach
bb5dab5c2e
add hw config struct
2021-10-26 22:48:01 +07:00
hathach
68fa9d4064
enhance fifo read/write
2021-10-26 13:56:56 +07:00
hathach
5d05f8758f
more clean up
2021-10-26 13:36:43 +07:00
hathach
4ebfd00d67
clean up
2021-10-26 13:33:40 +07:00
