Jerzy Kasenberg
fbac58e3e4
dcd_da146xx: Implement dcd_edpt_close_all()
...
Unconditionally disables all endpoints except EP0.
2021-09-24 10:46:16 +02:00
Jerzy Kasenberg
1503955860
dcd_da146xx: Clear transfer data on dcd_edpt_close
...
Closing endpoint clears data in affected xfer_ctl_t
2021-09-24 09:28:51 +02:00
Jerzy Kasenberg
f172c5ee13
dcd_da146xx: Remove registers pointer from xfer_ctl_t
...
Note: this commit does not change any logic.
xfer_ctl_t structure keeps all dynamic data connected with transfer.
It used to have pointer to register set that was constant and was there
for convenience only.
Removing register pointer from structure makes cleanup easier as whole
structure can be erased with memset like function.
In many cases functions were using local variable regs and xfer->regs which
were same, that could be confusing so this part is unified.
Few macros were added for easy conversion between epnum, xfer, and regs.
2021-09-24 09:28:51 +02:00
Jerzy Kasenberg
428eedcd04
dcd_da146xx: Update bus handling
...
So far bus reset was handled (with some holes in it).
Sleep and remote wakeup were not really tested and did not work.
With this change:
- bus reset is reworked
- remote wakeup works
- bus signal sleep is handled
2021-09-23 14:12:50 +02:00
Jerzy Kasenberg
c427712449
dcd_da146xx: Handle only enabled interrupts
...
Not much of an improvement but handle only interrupts
that were enabled and are expected.
2021-09-23 14:12:50 +02:00
Ha Thach
4766e7f348
Merge pull request #1093 from szymonh/master
...
Enforced buffer boundaries for hid devices
2021-09-23 13:31:46 +07:00
Ha Thach
3e569f8e79
Merge pull request #1094 from kasjer/kasjer/da146xx-vbus-handling
...
dcd_da146xx: Add VBUS handling
2021-09-18 23:12:40 +07:00
hathach
ea595d3161
update dcd attr for mm32
2021-09-18 16:53:16 +07:00
hathach
3333703d25
Merge branch 'master' into zhangslice-master
2021-09-18 13:35:26 +07:00
Scott Shawcroft
2499c9382d
rpi start. doesn't work
2021-09-17 16:51:34 -07:00
Jerzy Kasenberg
6d8677a78a
dcd_da146xx: Add VBUS handling
...
DA146xx are Bluetooth devices that may be battery
powered and when not connected to USB host there
is no need for USB peripheral to be running.
This change allows to enable USB peripheral when
VBUS is present otherwise USB is down reducing
power consumption.
tud_vsub_changed() function must be called
whenever VBUS change was detected.
For bus-powered devices this function should be called
at startup since VBUS must be present while device
is working.
2021-09-17 12:10:17 +02:00
hathach
b363afc091
minor clean up
2021-09-17 00:46:29 +07:00
hathach
c65cc75c6b
use correct resume detection for kl25z
2021-09-17 00:44:39 +07:00
hathach
8dfe0898e7
minor update to dcd khci
2021-09-17 00:43:10 +07:00
kkitayam
fbe1bf375c
Fix stall interrupt handling
2021-09-15 21:39:02 +09:00
hathach
93ed3034c0
merge master and minor clean up
2021-09-15 18:35:52 +07:00
hathach
f39656b6d7
Merge branch 'master' of github.com:hathach/tinyusb into kkitayam-impl_close_all_for_khci
2021-09-15 18:29:28 +07:00
Ha Thach
03866ddf9b
Merge pull request #1062 from HiFiPhile/fifo_dcd_transdimension
...
Improvements for dcd_transdimension
2021-09-15 16:07:06 +07:00
MasterPhi
0ded1c5bac
Reset EP flags on close.
2021-09-14 21:08:12 +02:00
hathach
a23944035d
correct assoc_itf_count for bth driver
2021-09-15 00:51:01 +07:00
hathach
b474522245
make vendor driver more flexible
...
- skip additional custom descriptor between interface and endpoints
- can have up to 2 bulk endpoint ( 1 in & 1 out)
2021-09-14 21:30:38 +07:00
hathach
25ea8f9c9e
update configuration parser
2021-09-14 21:02:38 +07:00
MasterPhi
3639168066
Fix warning.
2021-09-14 11:58:22 +02:00
hathach
5404d6d8ae
usbd pre-compute total interface length without replying on driver open
2021-09-14 12:47:20 +07:00
Ha Thach
6d3fb7eb98
Merge pull request #1087 from HiFiPhile/nuc_wkp
...
NUC126: fix remote_wakeup
2021-09-14 11:40:55 +07:00
szymonh
2d6407e7a5
Enforced buffer boundaries for hid devices
2021-09-13 22:56:25 +02:00
Ha Thach
1c3215257e
Merge pull request #1091 from hathach/esp32sx-compliance
...
Esp32sx compliance
2021-09-13 21:26:29 +07:00
hathach
cdc63459eb
esp32sx implement dcd_remote_wakeup(), fully compliance to chapter9 test suite
2021-09-13 16:49:38 +07:00
hathach
e64bfb9ff5
implement dcd_edpt_close_all(), pass chapter9 test suite (without remote wakeup)
2021-09-13 16:16:37 +07:00
szymonh
50e3c0054f
Add size check to tud_bt_hci_cmd_cb call in bth_device.c
2021-09-13 10:23:03 +02:00
hathach
43e6555fd0
clean up
2021-09-13 13:09:38 +07:00
hathach
ce5db06ba0
clear PID along with clear stall
2021-09-13 12:05:49 +07:00
hathach
6feda5ae8f
Merge branch 'nuc_wkp' of https://github.com/HiFiPhile/tinyusb into HiFiPhile-nuc_wkp
2021-09-13 11:52:16 +07:00
szymonh
d5f2c34eaa
Prevent buffer overflow in bth_device.c
2021-09-12 20:24:54 +02:00
hathach
9bed4e2e21
refactor nxp TDI dcd_edpt_xfer_fifo
2021-09-13 00:45:15 +07:00
hathach
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
hathach
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
hathach
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
MasterPhi
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
MasterPhi
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
MasterPhi
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
kkitayam
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
Mengsk
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
hathach
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
hathach
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
hathach
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
hathach
f81368174b
add other speed descriptor callback tud_descriptor_other_speed_configuration_cb()
...
example implement tud_descriptor_device_qualifier_cb() and
tud_descriptor_other_speed_configuration_cb() on high speed device to
fully compliant to usbcv
2021-09-09 15:17:19 +07:00
kkitayam
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
kkitayam
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
Ha Thach
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
