206 Commits

Author SHA1 Message Date
Jan Dümpelmann
551724498a Added support for STM32F1 Connectivity Line MCU
STM32F105 and STM32F107 are using the Synopsys IP
2020-04-22 17:39:53 +02:00
hathach
1f442c0a9a also add wakeup event 2020-04-18 23:48:36 +07:00
hathach
fa71402e17 implement disconnection detection for stm32 synopsys
- disconnection is OTG INT session end bit
- add USE_SOF to disable 1ms interrupt on mcu which isn't used now by
the stack
- add suspend detection
2020-04-18 23:40:27 +07:00
hathach
6f9c256ad0
complete remove dcd_set_config(), fix unit test 2020-04-17 13:52:34 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler 2020-04-17 12:27:53 +07:00
Ha Thach
19e2eb66c0
Merge pull request #350 from hathach/synopsys-msp430-dcd-disconnect-connect
Synopsys msp430 dcd disconnect connect
2020-04-17 09:51:15 +07:00
hathach
4c74140b31
stm32 sysnopsys disconnect/connect 2020-04-16 20:20:20 +07:00
Nathan Conrad
b0270f499b stm32fsdev: dynamic allocation of PMA. 2020-04-15 11:53:30 -04:00
Nathan Conrad
16f65890eb Merge branch 'master' into edpt_close 2020-04-14 10:22:03 -04:00
Nathan Conrad
bbc59f1ceb stm32fsdev: add static assert for PMA size bigger than EP0 size. 2020-04-13 20:50:17 -04:00
Nathan Conrad
f8e7487355 edpt_close: Updated based on feedback. 2020-04-13 09:51:46 -04:00
Nathan Conrad
0eeaccaf46 Skeleton, and initial stm32fsdev implementation (that leaks memory) 2020-04-12 21:27:27 -04:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler 2020-04-11 15:49:34 +07:00
Nathan Conrad
5bd9d14fc1 stm32fsdev: set dcd_connect API definitions to strong, Modify documentation. 2020-04-10 10:26:41 -04:00
Nathan Conrad
715c4dbbf8 stm32fsdev: Implement dcd_connect. 2020-04-09 17:03:12 -04:00
hathach
8f17945b67 move irq for stm32 synopsys 2020-04-08 16:37:09 +07:00
hathach
9014ca5528 move irq for stm32 fsdev 2020-04-08 16:26:14 +07:00
Nathan Conrad
eaf767b0db STM32FSDEV: Rewrite transfer ISR 2020-03-22 14:26:48 -04:00
hathach
e0cdab5bf7 fix stm32 fsdev epdesc 2020-03-08 16:28:21 +07:00
hathach
94e70f9b01 Merge branch 'master' into port-samg55 2019-12-21 23:53:48 +07:00
Ha Thach
7a05b177a4
Merge pull request #236 from jeremyherbert/master
Update dcd_stm32_fsdev.c with note about F042Fx remapping
2019-12-12 10:17:40 +07:00
Jeremy Herbert
9d96b6d66e
Update dcd_stm32_fsdev.c
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
hathach
96a9eca6a0 move VBUS sense out of dcd_synosys to bsp 2019-12-11 14:03:36 +07:00
hathach
75a2157715 fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete 2019-12-09 23:20:21 +07:00
hathach
988edce745 fix build 2019-12-09 18:49:38 +07:00
hathach
d7558e8a0f use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev 2019-11-28 13:39:29 +07:00
hathach
6bc245cb36 add dcd_edpt0_status_complete() which is useful for several mcu port 2019-11-28 11:46:36 +07:00
hathach
820a3705f5
Merge branch 'master' into develop 2019-10-02 12:13:47 +07:00
hathach
0673be7724 ported stm32f1, tested with f103 blue pill 2019-10-02 12:01:34 +07:00
Nathan Conrad
1e193212d7 Add testcase for EP0 stall recovery to USBTMC test script. 2019-10-02 00:31:47 -04:00
Nathan Conrad
e5f38e3e86 Remove references to EP kind. 2019-10-02 00:11:16 -04:00
Nathan Conrad
838cfe02c1 Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0 2019-10-02 00:09:07 -04:00
hathach
6183dbd0ce add -Wextra for more warnings to example
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
Nathan Conrad
f19082f02d Reset TX and RX endpoints to NAK when receiving setup packet. 2019-09-25 20:55:15 -04:00
Nathan Conrad
048e0448c0 ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar. 2019-09-25 20:54:59 -04:00
hathach
7ba8e81852
Merge pull request #177 from cr1901/fifo-fix
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-22 11:38:54 +07:00
William D. Jones
108f756e22 dcd_synopsys: Fix off-by-one error in FIFO allocation. 2019-09-21 23:01:06 -04:00
Nathan Conrad
ce9f133d25 FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos. 2019-09-21 12:00:04 -04:00
hathach
94c9cf0eff doc update 2019-09-20 16:14:35 +07:00
hathach
7b2f8cc73a added stm32 L0 support
close #125
2019-09-20 13:49:33 +07:00
Nathan Conrad
525b4cdb72 Use ESOF for wakeup timing. 2019-09-19 09:51:40 -04:00
Nathan Conrad
642afeea8b s/static const/define/ 2019-09-19 09:30:16 -04:00
Nathan Conrad
85623584f9 Remove debug assertions. 2019-09-19 09:24:52 -04:00
Nathan Conrad
89ffe78f84 ST FSDEV: No need to always reset the interrupt priority, also add some synchronization primitives after disabling interrupts. 2019-09-16 22:56:17 -04:00
Nathan Conrad
a33a854793 Include board header file... :X 2019-09-16 20:56:57 -04:00
Nathan Conrad
d341337c6a Implement remote wakeup + perhaps better sleep? 2019-09-16 20:25:50 -04:00
Nathan Conrad
6b9783cead s/unsigned int/uint32_t/ 2019-09-16 09:20:15 -04:00
Nathan Conrad
05c13342a3 Implement EP with size <64. 2019-09-15 23:51:42 -04:00
Nathan Conrad
18303e742e Covert macros to inline functions. 2019-09-15 23:46:03 -04:00
Nathan Conrad
ae873a709e Wrote TX instead of RX. 2019-09-15 23:33:36 -04:00