hathach
3349e40276
add cmake support for lpc17
2024-01-11 17:32:21 +07:00
Ryzee119
e7e19f5627
[OHCI] Allow more than 16 devices
2024-01-10 16:03:43 +10:30
Ha Thach
ae364b1460
Merge pull request #2390 from hathach/max3421e-support-rp2040
...
support max3421e for rp2040
2023-12-26 23:10:32 +07:00
hathach
551e47a464
allow rp2040 to use max3421e as host controller
...
- fix warnings build hcd max3421 with rp2040
- add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1
will enable this
- add max3421 driver implementation for rp2040 family
- update tusb_config for host to allow easy enable host selection for
rp2040 (default/pio-usb/max3421)
2023-12-26 22:50:01 +07:00
hathach
a01d6d8b31
tested other ports with featherwing max3421, change cs, intr pin to D10, D9
2023-12-26 21:13:43 +07:00
Ha Thach
804f6718ed
Merge pull request #2385 from kasjer/kasjer/nrf5x-fix-dcd_edpt_open-for-iso
...
dcd_nrf5x: Fix dcd_edpt_open for iso endpoint
2023-12-21 15:53:11 +07:00
Jerzy Kasenberg
7f84fe9bda
dcd_nrf5x: Fix dcd_edpt_open for iso endpoint
...
When ISO endpoint handling was introduced two lines that
clear stall and data toggle bit were left unchanged and they
were effective for ISO enadpoint as well.
This is incorrect behavior since EPSTALL and DTOGGLE registers
have only 3 bits for address.
Leaving code that clears toggle bit results in endpoint 0 toggle bit
being reset when iso endpoint (8) is opened.
Now code that clears stall and toggle bit is applied to non-iso endpoint only
as it was done before iso handling was introduced.
2023-12-21 08:48:59 +01:00
Ha Thach
b9be733c3c
Merge pull request #2383 from hathach/update-freertos-11.0
...
update freertos deps to v11.0.0
2023-12-18 21:24:11 +07:00
hathach
1a3f5f7a09
update FreeRTOSConfig.h
...
- remove configAssert()
- configCHECK_HANDLER_INSTALLATION=0 (to prevent unused-parameter error with configAssert(x)=nil
2023-12-18 20:33:43 +07:00
hathach
c314cb2903
remove usage of linkermap, update checkout to v4
2023-12-18 20:07:17 +07:00
hathach
3c4db26e01
update freertos deps to v11.0.0
2023-12-18 16:50:28 +07:00
Ha Thach
7c181c4e9b
Merge pull request #2373 from Lurcy38/master
...
Add Support stm32h5 for stm32h573i based on stm32_fsdev G0 implementa…
2023-12-18 11:55:48 +07:00
hathach
c9c00eb26b
added ioc for h563 nucleo, usb working with on-board stlink
2023-12-18 11:42:42 +07:00
hathach
a7fe956e35
rename dk board and more update
2023-12-15 18:57:21 +07:00
hathach
8633a2643a
update h5 build make/cmake
2023-12-15 18:08:19 +07:00
hathach
17a0ce655b
Merge branch 'master' into h5
2023-12-15 17:42:25 +07:00
Ha Thach
9474db8b0f
Merge pull request #2376 from HiFiPhile/iar_cmake
...
IAR CMake native support
2023-12-14 18:48:19 +07:00
Mengsk
6fda6e16f8
Update jlink script path.
2023-12-14 12:19:14 +01:00
Ha Thach
5a0c21a0aa
Merge pull request #2379 from hathach/tweak-hil-pi4
...
reset pi4 usb bus before checkout/download, so that we could skip delay
2023-12-14 17:08:27 +07:00
hathach
84839fa5f1
reset pi4 usb bus before checkout/download, so that we could skip delay
2023-12-14 16:52:45 +07:00
Mengsk
2396fecee2
Move jlink script.
2023-12-14 09:48:40 +01:00
Mengsk
35615ecb6f
Update doc.
2023-12-13 17:41:54 +01:00
Mengsk
3eb7d6ede9
Enhance IAR CMake support.
2023-12-13 17:20:51 +01:00
Ha Thach
ccc59e8763
Merge pull request #2375 from hathach/hil-add-samd51
...
add samd51 (itsybitsy_m4) to hardware test loop
2023-12-13 20:34:03 +07:00
HiFiPhile
f3d713ac73
Fix CI & typo.
2023-12-13 14:32:23 +01:00
hathach
3da0d78170
minor tweaking
2023-12-13 20:16:47 +07:00
hathach
31c33ca853
tweak usb reset wait time, fix test script with IAR server
2023-12-13 19:18:08 +07:00
hathach
b343ac6d0f
reset usb before running test
2023-12-13 19:05:44 +07:00
hathach
19d7d62e80
try to add samd51 to hil pool using doublereset (rpi gpio) and bossac
2023-12-13 18:54:00 +07:00
henneboi
93c40b6966
Add Support stm32h5 for stm32h573i based on stm32_fsdev G0 implementation Tested on Windows with IAR and gcc toolchain ( via cubeide) Tested only with audio examples, but sould be ok for other examples Cmake pacthed : but not tested Linux build : not tested Added a temporary workaround in make file to support H5 HAL repo ( ARMCC_VERSION=0)
2023-12-12 16:04:21 +01:00
Ha Thach
59ecdb78fe
Merge pull request #2368 from LarssonOliver/master
...
Add configuration option CFG_TUH_CDC_FTDI_PID_LIST to tusb_option.h
2023-12-12 15:54:35 +07:00
Oliver Larsson
9a7e23379c
Add configuration option CFG_TUH_CDC_FTDI_PID_LIST to tusb_option.h
2023-12-12 08:11:16 +01:00
Ha Thach
6bb92555f3
Merge pull request #2347 from IngHK/HostLogsFixes
...
fixed compile errors due to untreated CFG_TUH_LOG_LEVEL
2023-12-12 13:35:30 +07:00
Ha Thach
b6ad70bad9
Merge pull request #2371 from hathach/hil-add-nrf52840
...
add nrf52840 to hard in the loop pool
2023-12-12 13:05:08 +07:00
hathach
f986f1f22d
add reset usb bus
2023-12-12 12:23:07 +07:00
hathach
b5448a7987
add feather nrf52840 express to hil pool
2023-12-12 11:59:37 +07:00
Ha Thach
24c5e6ab45
Merge pull request #2369 from hathach/more-s3-hil
...
More s3 hil
2023-12-11 21:10:55 +07:00
hathach
bd1009e135
tweak openocd flash command
2023-12-11 20:43:59 +07:00
hathach
aa9dce09a1
change baudrate back to 1.5MB
2023-12-11 20:37:09 +07:00
hathach
b67855468d
fix build
2023-12-11 17:56:10 +07:00
hathach
ea885d5c83
reduce s3 baudrate to prevent usb isssue, reset rp2040 usb for board test example
2023-12-11 17:48:27 +07:00
Ha Thach
37158eddcb
Merge pull request #2367 from hathach/add-hil-s3
...
Add esp32s3 to hardware in the loop test
2023-12-11 16:16:28 +07:00
hathach
f5f087e99c
skip iar build for f4 and h7 to save build time
2023-12-11 15:56:48 +07:00
hathach
aa21d50196
rename hil json debugger to flasher, replace jlink cpu with flasher_args
2023-12-11 15:23:09 +07:00
Ha Thach
4c80f5a192
Merge pull request #2296 from LarssonOliver/master
...
Allow external definition of TU_CP210X_PID_LIST
2023-12-11 15:13:20 +07:00
hathach
e1142d4527
wrap up s3 hil test
2023-12-11 14:52:21 +07:00
hathach
c829116830
extract artifacts to same folder structure as ci build
2023-12-11 14:43:54 +07:00
hathach
3689c4c604
more test
2023-12-11 14:38:37 +07:00
hathach
721ae45ebb
update hil test to support s3
2023-12-11 14:29:11 +07:00
hathach
0642a6d9e7
more artifacts
2023-12-11 11:56:04 +07:00
