2631 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
hathach	421221baa5	making more progress, but failed with WRITE10 ... incorrect queue 448 bytes instead of 512	2019-12-21 23:51:57 +07:00
hathach	050fa2fd39	able to response to scsi inquiry, but failed to response to test unit ready	2019-12-21 19:33:41 +07:00
hathach	24009cb689	fixed unit test with dcd_edpt0_status_complete	2019-12-10 08:16:11 +07:00
hathach	752aea7d72	enhance samg	2019-12-09 23:58:13 +07:00
hathach	fa96078882	clear data toggle in clear stall, also set config bit	2019-12-09 23:21:06 +07:00
hathach	75a2157715	fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete	2019-12-09 23:20:21 +07:00
hathach	0316e0ecd4	update descriptor, enhance ep in transfer	2019-12-09 22:48:35 +07:00
hathach	759fa76280	implementing dcd_edpt_open	2019-12-09 21:36:15 +07:00
hathach	988edce745	fix build	2019-12-09 18:49:38 +07:00
hathach	208a77678c	clean up, switch and update submodule samd to circuitpython branch	2019-12-09 18:37:54 +07:00
hathach	9a8e6ed93b	added microchip submodule	2019-12-09 18:18:01 +07:00
hathach	69a801c027	change the samd submodule	2019-12-09 17:59:30 +07:00
hathach	e9725dcdbe	use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51	2019-11-28 13:48:55 +07:00
hathach	d7558e8a0f	use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev	2019-11-28 13:39:29 +07:00
hathach	ac701c398b	clean up	2019-11-28 12:18:56 +07:00
hathach	552cc3ef33	implement dcd_edpt_stall	2019-11-28 11:56:35 +07:00
hathach	5dc04887e2	get passed set address	2019-11-28 11:48:08 +07:00
hathach	6bc245cb36	add dcd_edpt0_status_complete() which is useful for several mcu port	2019-11-28 11:46:36 +07:00
hathach	40b454cf28	get passed first get device descriptor	2019-11-27 23:20:48 +07:00
hathach	6225d5bcfd	able to handle setup packet	2019-11-27 16:01:25 +07:00
hathach	bc21714c7e	detect bus reset	2019-11-27 14:49:19 +07:00
hathach	302746d02c	Merge branch 'develop' into port-samg55	2019-11-27 12:35:59 +07:00
hathach	fe1eadf177	fix #229	2019-11-27 12:34:30 +07:00
hathach	8a1b6327ba	extract code to invoke_class_control() ... - also rename usbd_class_drivers to _usbd_driver	2019-11-27 12:12:52 +07:00
hathach	745f0b4521	clean up	2019-11-27 11:02:24 +07:00
hathach	4c9c13c767	add uart sync support	2019-11-26 18:21:46 +07:00
hathach	387384c0d9	fix samg55 with newlib missing end symbol	2019-11-26 17:39:51 +07:00
hathach	3a2d63613b	logo design	2019-11-25 22:56:37 +07:00
hathach	13f4223517	add the most important contributor	2019-11-25 21:10:08 +07:00
hathach	7c606563ed	lower case for arturo	2019-11-25 20:52:27 +07:00
hathach	0fccfc647f	update	2019-11-25 13:37:55 +07:00
hathach	168f0cb471	update readme	2019-11-25 13:33:50 +07:00
hathach	a91ac72dbd	add the most important file of the project: CONTRIBUTORS.md	2019-11-25 13:29:42 +07:00
hathach	c691dc4cb2	update	2019-11-25 10:42:32 +07:00
hathach	58e8265964	usb hw init OK	2019-11-24 23:46:28 +07:00
hathach	24b2cea139	Merge branch 'master' into port-samg55	2019-11-24 21:22:42 +07:00
Ha Thach	64b05a1d5f	Merge pull request #225 from xobs/fomu-offset-fix ... bsp: fomu: fix rom address for example programs	2019-11-24 11:18:53 +07:00
Sean Cross	a106c5114b	bsp: fomu: fix rom address for example programs ... During development, the ROM address was at offset 0x2001a000 (due to the fact that the test program was located immediately following the bitstream). In normal Fomus, the ROM address is at offset 0x20040000, in order to take into account additional bitstreams and bootloaders. Correct the address to the offset in order to get examples working with existing Fomus. Signed-off-by: Sean Cross <sean@xobs.io>	2019-11-24 01:15:31 +00:00
hathach	ac65e94b86	Merge branch 'develop'	2019-11-24 00:53:31 +07:00
hathach	a3ed87972d	more doc	2019-11-24 00:52:34 +07:00
hathach	2379ce8d65	update doc, RT1011 verified to work, thanks to @arturo182	2019-11-23 21:59:28 +07:00
Ha Thach	15d6f813c2	Merge pull request #224 from hathach/develop ... added rt1010 board support	2019-11-23 21:53:58 +07:00
hathach	778cff19c1	added rt1010 board support ... not tested on the actual hardware board though.	2019-11-23 21:18:40 +07:00
Ha Thach	0ee70512ac	Merge pull request #223 from hathach/develop ... Added board RT1050 EVKB, RT1020 EVK, RT1015 EVK	2019-11-23 01:26:58 +07:00
hathach	9758f3e461	doc update	2019-11-23 01:11:37 +07:00
hathach	a6b1289096	added rt1015 evk board	2019-11-23 01:09:39 +07:00
hathach	d76eb8d659	doc update	2019-11-23 00:51:43 +07:00
hathach	d991466a8e	fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2	2019-11-23 00:48:56 +07:00
hathach	4ecb07afc5	added MIMX RT1052 Evaluation Kit	2019-11-23 00:19:53 +07:00
Ha Thach	98c5084292	Merge pull request #222 from hathach/develop ... add RT1060 evk board support	2019-11-22 17:59:40 +07:00