52 Commits

Author	SHA1	Message	Date
hathach	421221baa5	making more progress, but failed with WRITE10 ... incorrect queue 448 bytes instead of 512	2019-12-21 23:51:57 +07:00
hathach	050fa2fd39	able to response to scsi inquiry, but failed to response to test unit ready	2019-12-21 19:33:41 +07:00
hathach	752aea7d72	enhance samg	2019-12-09 23:58:13 +07:00
hathach	fa96078882	clear data toggle in clear stall, also set config bit	2019-12-09 23:21:06 +07:00
hathach	75a2157715	fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete	2019-12-09 23:20:21 +07:00
hathach	0316e0ecd4	update descriptor, enhance ep in transfer	2019-12-09 22:48:35 +07:00
hathach	759fa76280	implementing dcd_edpt_open	2019-12-09 21:36:15 +07:00
hathach	208a77678c	clean up, switch and update submodule samd to circuitpython branch	2019-12-09 18:37:54 +07:00
hathach	e9725dcdbe	use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51	2019-11-28 13:48:55 +07:00
hathach	d7558e8a0f	use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev	2019-11-28 13:39:29 +07:00
hathach	ac701c398b	clean up	2019-11-28 12:18:56 +07:00
hathach	552cc3ef33	implement dcd_edpt_stall	2019-11-28 11:56:35 +07:00
hathach	5dc04887e2	get passed set address	2019-11-28 11:48:08 +07:00
hathach	40b454cf28	get passed first get device descriptor	2019-11-27 23:20:48 +07:00
hathach	6225d5bcfd	able to handle setup packet	2019-11-27 16:01:25 +07:00
hathach	bc21714c7e	detect bus reset	2019-11-27 14:49:19 +07:00
hathach	745f0b4521	clean up	2019-11-27 11:02:24 +07:00
hathach	c691dc4cb2	update	2019-11-25 10:42:32 +07:00
hathach	58e8265964	usb hw init OK	2019-11-24 23:46:28 +07:00
hathach	f16ebd512b	indent clean up	2019-07-04 18:45:10 +07:00
hathach	73d7ab201e	remove dcd_edpt_busy()	2019-06-10 22:29:18 +07:00
hathach	13e01c7dca	add TU_ prefix to compiler ATTR to prevent name conflict with application	2019-06-06 10:39:37 +07:00
hathach	667133304b	fix samd dcd_clear_stall also reset data toggle	2019-05-10 00:10:18 +07:00
hathach	dd9c441a61	samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect ... should work with #47	2019-04-02 02:14:22 +07:00
hathach	b28cc6ddb1	added dcd_remote_wakeup() stub for all ports	2019-03-30 14:47:11 +07:00
hathach	1c2beba85c	working on suspend and resume ... change dcd_init signature	2019-03-29 16:23:00 +07:00
hathach	1e9848d917	replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall ... - remove dcd_edpt_stalled() from dcd porting	2019-03-27 16:09:49 +07:00
hathach	4722376654	remove dcd_get_frame_number()	2019-03-27 01:01:48 +07:00
hathach	c211ee19dd	migrate license from BSD 3 clause to MIT	2019-03-20 16:11:42 +07:00
hathach	eda56769b9	dcd_set_address include status response, usbd control stall both control in and out	2019-03-13 23:14:48 +07:00
hathach	bd53256126	fix #32	2019-01-23 19:06:37 +07:00
hathach	6f17b4e019	change to dcd_get_frame_number	2018-12-21 12:46:20 +07:00
hathach	426064201a	fix samd build	2018-12-19 13:16:42 +07:00
hathach	902697ca07	add dcd_get_microframe()	2018-12-17 12:14:11 +07:00
hathach	6d86db3977	rename edpt_dir/number/addr to tu_edpt_*	2018-12-12 11:51:31 +07:00
hathach	a73017fdc2	hal clean up ... - replace tusb_hal_int_enable/disable to dcd_int_enable/disable, hcd_int_enable/disable - remove tusb_hal_init(), this will be part of dcd_init/hcd_init, anything beyond dcd/hcd should be inited by bsp	2018-12-05 13:20:25 +07:00
hathach	6048a3bff4	remove dcd_connect/disconnect since there is no usage now	2018-12-05 12:22:33 +07:00
hathach	064eec5dd8	clean up warnings	2018-11-26 12:29:55 +07:00
Scott Shawcroft	bf70f89240	Introduce a Makefile for the OS_NONE device example ... It currently supports the SAMD21 and SAMD51 only. More will be added later.	2018-11-25 11:46:06 -08:00
Scott Shawcroft	bf8c4612dc	Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store ... a SETUP token into.	2018-11-23 11:20:23 -08:00
Scott Shawcroft	6aa0146c72	Reset USB peripheral and wait for startup	2018-11-23 11:15:39 -08:00
hathach	f196b24dce	rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS	2018-11-23 15:22:46 +07:00
hathach	1d6fc49fa9	clean up	2018-11-21 17:03:39 +07:00
hathach	3cad1d1134	samd21 work well with cdc	2018-11-21 15:00:36 +07:00
hathach	a30dfa3324	clean up	2018-11-21 13:11:19 +07:00
hathach	a0ce92bcfd	update dcd samd21	2018-11-21 13:01:39 +07:00
hathach	155edc7b00	fix ses irq vector	2018-11-21 12:36:28 +07:00
hathach	d036f62b0e	samd51 fix stable issue with dcd	2018-11-20 17:25:41 +07:00
hathach	c503d48ec4	clean up	2018-11-20 01:20:39 +07:00
hathach	5732be224c	update example for PR. correct share_control definition ... - rename dcd,hal to dcd_samd51, hal_samd51 since some IDE has issue with duplicated names (e.g keil, ses).	2018-11-14 16:03:58 +07:00