Kamil Tomaszewski
448dcdc4cf
spresense: fix setup processed flag
2021-02-24 17:39:16 +01:00
Ha Thach
656673fb58
Merge pull request #674 from hathach/host-msc
...
Enhance Host MSC
2021-02-24 00:19:38 +07:00
hathach
451650fa32
move ehci and ohci to portable folder
2021-02-23 23:09:48 +07:00
hathach
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
hathach
c5b8980398
separate hcd_init from ehci
2021-02-22 22:40:51 +07:00
hathach
8a2e4c79fd
make hcd tdi more generic
2021-02-22 18:02:52 +07:00
Kamil Tomaszewski
b591a66b3d
Pass the correct speed on Spresense
2021-02-22 11:24:16 +01:00
hathach
00b4b74e82
rename hcd_lpc18_43 to hcd_transdimension
2021-02-22 17:15:06 +07:00
hathach
43ca626774
merge iso and cbi transaction size to max ep size
2021-02-22 12:27:02 +07:00
ndinsmore
cb5b9eb2f6
Remove stray. commented out line
2021-02-19 08:33:06 -05:00
ndinsmore
ac87a4547d
Change to using tu_min32
...
This was a github edit, not tested
2021-02-18 08:25:04 -05:00
Nicholas R Dinsmore
27f4b6f5a4
Included size check for ISO buffers
2021-02-17 18:22:24 -05:00
Nicholas R Dinsmore
79b360f0a6
Enable iso buffers per rp2040 spec
2021-02-17 13:22:34 -05:00
ndinsmore
09868434cd
Fixes RP2040 buffer reallocation overrun problem ( #642 )
...
Fix running out of memory on a device that repeatedly closes and opens an endpoint. This is a workaround at the moment. A better solution would be to implement reclaiming usb buffer memory when closing an endpoint (i.e. implement dcd_edpt_close).
2021-02-12 08:16:46 +00:00
Ha Thach
78f50518a4
Merge pull request #610 from hathach/rp2040-followup2
...
Rp2040 followup2
2021-02-01 12:44:53 +07:00
Ha Thach
a044578a33
Merge pull request #601 from majbthrd/start_pi2tu
...
start the assimilation of Pi Pico into TU
2021-02-01 12:43:59 +07:00
hathach
1abf9eeb80
clean up rp2040 assigned_address, remove panic from remote_wakeup
2021-01-27 13:18:03 +07:00
hathach
c3c4f65fea
wrap rp2040_usb around opt mcu
2021-01-27 13:04:38 +07:00
Kamil Tomaszewski
5f999fa6a0
Fix dcd issues on cxd56
...
Pass the next setup package when USB stack is ready to receive it.
When the transfer is 0 on EP0 send complete to the USB stack
Pass the data received after the setup package to the USB stack.
2021-01-25 11:13:56 +01:00
Peter Lawrence
edc2224118
rp2040: start to adopt TU coding conventions
2021-01-23 20:21:58 -06:00
Peter Lawrence
587d1b334b
rp2040_hcd: check pointer before using
2021-01-23 20:19:10 -06:00
Ha Thach
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
graham sanderson
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
hathach
d33b22d127
fix ci
2021-01-08 22:48:52 +07:00
hathach
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
hathach
cca27fc383
another rename
2021-01-08 16:54:50 +07:00
hathach
201ea7ca6d
remove inline for update_grxfsiz
2021-01-08 16:38:41 +07:00
hathach
9998e8a665
more minor work
2021-01-08 16:34:36 +07:00
hathach
86c34a9a33
minor clean up following pr581
2021-01-08 16:25:30 +07:00
Ha Thach
1f00a182c4
Merge pull request #581 from hathach/dcd_synopsis_mem_allocation
...
Dcd synopsis mem allocation
2021-01-08 12:45:46 +07:00
hathach
3e1d85eed2
comment clean up
2021-01-08 11:43:26 +07:00
hathach
cc5dfd03cd
update comment and correct the size to 8+2
2021-01-08 11:21:26 +07:00
hathach
60620dca42
walkround for samd21 setup_packet overflow
...
increase setup packet size from 8 to 12, since USB DMA controller is
suspected to overflow the buffer with 2 extra bytes
2021-01-08 01:21:03 +07:00
Reinhard Panhuber
f2b4567a2b
Correct function declaration
2021-01-04 17:15:42 +01:00
Reinhard Panhuber
2fa500af18
Minor corrections for PR
...
- externerlize code into functions
- correct comments
2021-01-04 17:00:23 +01:00
Reinhard Panhuber
37bb14678a
Remove too verbose comment
2021-01-04 12:06:16 +01:00
Reinhard Panhuber
13b499f910
Clean up
2021-01-03 17:59:50 +01:00
Reinhard Panhuber
56c47188d8
Rework USB FIFO allocation scheme and allow RX FIFO size reduction
2021-01-03 16:11:56 +01:00
kkitayam
2737166d2b
fixed wrong direction to enable EP in dcd_edpt_open.
...
fixed incorrect handling of STALL other than EP0
convert tabs to spaces
removed unused symbols
2020-12-23 20:32:29 +09:00
kkitayam
2bbfc56bd8
added support for frdm_kl25z
2020-12-18 00:07:50 +09:00
hathach
8b34f2fca8
fix ci
2020-11-27 16:07:13 +07:00
hathach
94527951a0
add bus suspend & resume support for esp32s2
2020-11-27 15:54:55 +07:00
hathach
496c7c701a
fix ci
2020-11-09 01:23:19 +07:00
Jacob Potter
229be75a98
Move into if statement
2020-10-24 17:16:05 -06:00
Jacob Potter
01996457c8
CR feedback: compare CFG_TUSB_RHPORT1_MODE instead of using new macro
2020-10-24 17:11:32 -06:00
Jacob Potter
c87ed8eff1
Allow use of internal FS PHY on OTG_HS interface
...
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with
either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently
the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY
(`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
2020-10-18 17:01:17 -06:00
Ha Thach
6ce5395947
Merge pull request #525 from kasjer/kasjer/da1469x-iso
...
da1469x iso support
2020-10-11 16:12:20 +07:00
Ha Thach
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
Ha Thach
762b390433
Merge pull request #521 from PanRe/uac2
...
Uac2
2020-10-10 14:33:42 +07:00
Niklas Hauser
f914e48d25
Dynamically check STM32F3 IRQ remap option
2020-10-10 05:02:37 +02:00
