hathach
2666e1efec
add tuh_inited() and tud_inited()
2021-05-18 12:58:24 +07:00
hathach
98f5082191
rename var to be consistent
2021-05-18 12:58:24 +07:00
hathach
1dd2cd43dd
add hcd_ehci.h as interface for ehci port
2021-05-18 12:58:24 +07:00
hathach
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
hathach
451650fa32
move ehci and ohci to portable folder
2021-02-23 23:09:48 +07:00
hathach
0de6a05d73
fix ohci hcd_init() signature change
2021-02-23 19:45:53 +07:00
hathach
c5b8980398
separate hcd_init from ehci
2021-02-22 22:40:51 +07:00
hathach
1e07fc024c
add rhport to hcd_init()
2021-02-22 22:32:56 +07:00
hathach
8a2e4c79fd
make hcd tdi more generic
2021-02-22 18:02:52 +07:00
Jeremiah McCarthy
21f1cd4ec7
Implement requested PR changes
...
Removes CFG_TUSB_ALT_BIT_PACKING_ALIGNMENT, and makes the manual padding
behavior standard. Replaced unused variable name with TU_RESERVED.
2021-02-18 13:26:03 -05:00
Jeremiah McCarthy
f8fbc0930b
Add alternate bitfield padding option
...
Adds configuration option CFG_TUSB_ALT_BIT_PACKING_ALIGNMENT, which
substitutes bitfield variable " : 0" padding syntax with an unused
variable of size equal to the remaining number of bits.
This change resolves aligned access issues for some platforms.
Default behavior is original if the option is not explicitly enabled.
2021-02-16 10:43:52 -05:00
hathach
ec458292fe
fix host build
2021-01-25 13:25:47 +07:00
hathach
67a9cdc35b
fix compiler warning
2021-01-22 11:33:25 +07:00
graham sanderson
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
hathach
2907b1e438
clean up
2020-11-07 10:37:33 +07:00
hathach
14461beffa
remove legacy blocking usbh_control_xfer()
...
reworking cdc host driver
2020-11-02 09:19:34 +07:00
hathach
2efdc2fb64
get hub work more reliably
2020-11-02 08:46:24 +07:00
hathach
6eafdfab93
update usbh with hub to use async control transfer
...
work ok with msc + hub, but definitely need more testing.
2020-11-02 00:54:04 +07:00
hathach
e029d6d726
added host set_config driver
...
to resolve control conflict with SET_CONFIGURE for class driver
- open will be called to open endpoint only
- set_config called later to initialized class driver
2020-11-01 17:46:46 +07:00
hathach
3623f578a4
more clean up
2020-10-13 14:11:17 +07:00
hathach
9c07a2a4e2
rework msc host
...
- msc host enum is now async
- implement async tuh_msc_scsi_command() / tuh_msc_request_sense() /
tuh_msc_test_unit_ready()
2020-10-13 00:07:51 +07:00
hathach
87b989e8b4
add usbh_edpt_claim/release
...
implement USBH_EVENT_FUNC_CALL
2020-10-12 00:35:45 +07:00
hathach
2b54dcb9f6
move functions around
2020-09-07 15:39:46 +07:00
hathach
7a3b24827e
clean up
2020-09-07 15:25:03 +07:00
hathach
66a10ec9c8
rework usbh control transfer
...
use series of complete callback instead of blocking semaphore, which is
more noOS friendly. still working with hid host
2020-09-07 15:19:20 +07:00
hathach
b3e81673c0
change xfer_cb return type from void to bool
2020-09-06 12:11:07 +07:00
hathach
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
hathach
9a6d7c648e
clean up enum task
2020-09-05 21:12:43 +07:00
hathach
828f720207
refactor hub class
...
- separate connect/disconnect handling
- hub work with full speed, but doesn't seem to work with Low speed
device (with mcb1800)
- need to update msc host after migrating from isr to xfer_cb (blocked
at inquiry)
2020-09-05 20:20:45 +07:00
hathach
7ffb6acc16
more clean up
2020-09-05 17:16:46 +07:00
hathach
b8b95e8494
add in_isr to all hcd event functions
2020-09-05 15:46:50 +07:00
hathach
90c8c14652
clean up
2020-09-05 15:19:01 +07:00
hathach
bc09b6065f
refactor extract parse_configuration_descriptor()
2020-09-05 15:16:45 +07:00
hathach
d87f2a9691
remove usbh control mutex
2020-09-05 15:05:25 +07:00
hathach
f7cf8cdf27
defer xfer_isr to xfer_cb
2020-09-05 14:41:31 +07:00
hathach
4d57b4ea33
clean up
2020-09-05 13:57:07 +07:00
hathach
35aee4a6af
more hid host work
2020-09-03 23:57:51 +07:00
hathach
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
hathach
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
hathach
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
hathach
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
hathach
503c15217e
example to call tud_init() after freeRTOS kernel is started
...
add note for usb init when using with RTOS
2020-07-23 09:20:45 +07:00
hathach
d108ea4326
implement hcd_uframe_number for ohci
...
able to get 8 byte descriptors using LPC1769 + base, but failed to reset
and set address.
2020-05-22 21:45:34 +07:00
hathach
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
hathach
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
hathach
4a3a448340
clean up things, add makefile for host example
2020-05-04 00:29:52 +07:00
Nathan Conrad
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
hathach
03deeea465
fix segger host example
2019-11-22 00:33:10 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
