Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-24 05:42:57 +08:00
Code Issues Packages Projects Releases Wiki Activity
3,351 Commits 10 Branches 15 Tags
Commit Graph

519 Commits

Author SHA1 Message Date
hathach
4cec866994
correct HSE_VALUE in hal_conf 
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
 2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
 2020-07-02 11:58:40 +07:00
hathach
4966fb2e13 clean up 2020-07-02 01:25:21 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Uwe Bonnes
196bdbc702 st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now 
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
 2020-07-01 14:45:07 +02:00
hathach
d2450abaaf only set turnaround in reset complete 2020-07-01 18:51:04 +07:00
hathach
e3974d6869 correctly set turn around according to cpu clock 
help to run with low speed mcu
 2020-07-01 18:44:52 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
hathach
ed1b670c55 clean up code 2020-07-01 17:57:37 +07:00
Jan Dümpelmann
378e6aab8c Clear ep0_pending if rx short packet 2020-06-30 17:56:25 +02:00
Jan Dümpelmann
9e35ef73f7 Fix receiving of short packet data (ep out) 2020-06-30 12:55:39 +02:00
Uwe Bonnes
30a18e2605 stm32f723disco: USB HS enumerates. 2020-06-30 11:07:53 +02:00
Uwe Bonnes
05bfd9ac4a dcd_synopsys: Handle HS and FS IP in one device 
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file

F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
 2020-06-30 11:02:41 +02:00
hathach
ab75998316 Merge branch 'master' into add-stm-hs 2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support 
Support for DA1469x MCU from Dialog Semiconductor
 2020-06-30 01:20:56 +07:00
Ha Thach
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive 
Improvements to Synopsys EP OUT
 2020-06-29 16:02:40 +07:00
Jan Dümpelmann
99df7789a7 Add author name to dcd_synopsys.c 2020-06-29 10:55:03 +02:00
Jan Dümpelmann
4f69bcea7e Remove EP0 remaining bytes manipulation 
Renaming edpt_xact to edpt_schedule_packets
 2020-06-26 17:18:25 +02:00
Jeff Epler
b2ef8cdd42 dcd_samd: Provide implementation for OPT_MCU_SAME5X 2020-06-25 18:51:04 -05:00
hathach
d4d6e06c1d added OPT_MCU_SAME5X option 2020-06-24 00:53:17 +07:00
Jan Dümpelmann
067287ef91 Add transaction (edpt_xact) as sub transfer 
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
 2020-06-18 17:18:28 +02:00
Mengsk
9ffb9b69a4 Disable SOF in dcd_stm32_fsdev 
Signed-off-by: Mengsk <admin@hifiphile.com>
 2020-06-18 14:18:00 +02:00
Mengsk
57b553e023 Fix IAR warnings. 
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
 2020-06-17 10:08:33 +02:00
hathach
667eaa6dd6 fix stm32h743 priority with freeRTOS 2020-06-16 00:03:52 +07:00
hathach
2dd1be13e5 Enhance EP FIFO allocation for both Fullspeed and Highspeed 
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
  - Interrupt -> use EPSize
  - Bulk/ISO  -> use  max(EPSize, remaining-fifo / non-opened-EPIN)
 2020-06-15 23:17:49 +07:00
Jan Dümpelmann
4399dd1b06 cherry pick PR399 commit : Interrupt time improvements 2020-06-14 19:13:31 +07:00
hathach
f438aedccb overwrite setup packet 2020-06-14 18:29:38 +07:00
Jerzy Kasenberg
0635bafe0a Add DCD for Dialog DA1469x MCU 
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.

This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
 2020-06-09 15:55:46 +02:00
hathach
710c54f8cb allow hs ep open with 512 bytes 2020-06-01 01:36:09 +07:00
hathach
f771afe6af fixed EP0 size to 64 since LS is not supported in device mode 
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
 2020-05-31 23:43:29 +07:00
hathach
5ffba8536d able to detect as hs 2020-05-31 19:41:22 +07:00
hathach
d4bf777c94 try to get synopsys work with OTG HS + external PHY 2020-05-27 11:01:33 +07:00
hathach
b4804d1592 random clean up for tdi 2020-05-26 22:15:38 +07:00
hathach
947c3eb10d multiple port support for global otg base 2020-05-26 16:07:48 +07:00
hathach
b7ab60aa44 suporting multiple port (OTG FS + HS) for stm32 2020-05-26 15:52:02 +07:00
hathach
ff9994116e fix nrf hanged (blocking wait) when called within critical section 2020-05-21 21:22:12 +07:00
hathach
550746097b fix cast-align warning for nuc505 2020-05-18 13:03:41 +07:00
hathach
1a8ce043ed enable -Wcast-align 
suppress vendor sdk driver at board.mk
 2020-05-17 14:24:15 +07:00
Jan Dümpelmann
42edbc0006 Allow EP0 to use xfer sizes larger than one packet 2020-05-15 22:26:14 +02:00
Jan Dümpelmann
28696de390 Interrupt time improvements 2020-05-15 18:21:44 +02:00
Jan Dümpelmann
3401e0f6ff Synopsys OUT EP improvements: 
- Use register based XFRSIZ to determine transfer complete
  (xfer->queued_len and xfer->short_packet were deleted)
- Pop out as many RxFIFO data entries as available within a IRQ call
- less application interruption due to XFRC calls
 2020-05-08 18:10:48 +02:00
hathach
58b99e59d4 detect if SD is actually present on the flash using SD magic 
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
 2020-05-05 23:07:56 +07:00
Ha Thach
101f234a16
Merge pull request #387 from duempel/redesign_transmit_synopsys 
Redesign of Synopsys device transmission
 2020-05-04 14:41:20 +07:00
Jan Dümpelmann
fd69cc3dcc clean up 
renaming function and variables
changing indent size
 2020-05-04 07:59:13 +02:00
hathach
0e30afa691 abstract all UDP_CSR 2020-05-02 18:24:23 +07:00
hathach
3ad0cd041b clean up 2020-05-02 16:29:22 +07:00
hathach
ac3c645dc1 fix EP0 data toggle issue 2020-05-02 16:09:28 +07:00
hathach
2a479175ae remove toggle walkaround, fix control stall race condition 2020-05-02 14:51:21 +07:00
hathach
a74a823b0a fix dcd samd race condition with setup packet 
setup packet can complete together with previous status (in & out).
Always make sure to prepare valid buffer for holding setup packet when
queuing control status.
 2020-04-30 00:29:47 +07:00
Jan Dümpelmann
59ff208c65 Changed switch into if statements 2020-04-29 12:37:29 +02:00