Ha Thach
b03a688b24
Merge pull request #1768 from ftdigdm/port-ft90x
...
Port ft90x
2023-01-30 22:13:14 +07:00
hathach
cc18784479
hardcoded configPRIO_BITS for IAR build to pass CI
2023-01-30 16:42:56 +07:00
Ha Thach
88f3279c3c
Merge branch 'master' into port-ft90x
2023-01-30 11:40:53 +07:00
hathach
3fd075b48b
fix warning
2023-01-20 15:29:23 +07:00
hathach
84be70baf5
fix iar build with board_test
2023-01-18 13:17:53 +07:00
hathach
075095554a
dont use non-std strncasecmp
2023-01-18 11:47:24 +07:00
hathach
ecfd57e6f1
get most examples build with iar
2023-01-18 10:31:00 +07:00
hathach
8df2fd1916
update freertos example to build with iar
2023-01-17 23:38:10 +07:00
Ha Thach
949950e592
Merge branch 'master' into ch32v307
2023-01-07 23:46:46 +07:00
Ha Thach
71a5906865
Merge pull request #1767 from pete-pjb/master
...
Allow the use of non-static allocation for FreeRTOS mutexes & queues
2022-12-05 12:45:48 +07:00
hathach
de5a67bf3b
clean osal_freertos, update freertos examples to work with configSUPPORT_DYNAMIC_ALLOCATION only
...
note: for example to build with configSUPPORT_STATIC_ALLOCATION = 0, one
of heap_n.c must be included in makefile/cmake
2022-12-05 12:09:41 +07:00
hathach
43b255f413
more typos
2022-12-04 19:44:01 +07:00
Bastien Nocera
6a2cf67289
Fix typos
2022-12-04 19:43:23 +07:00
Gordon McNab
1437ad1dfb
Add endpoint definitions for more example projects.
2022-11-30 12:15:27 +00:00
Gordon McNab
fe63e30a44
Add FT9xx for cdc_dual_ports
...
Fix handling of interrupt endpoints. i.e. no ZLPs.
Fix the assignation of endpoint types.
Add button support for MM900evx boards.
On board support do not block for UART input.
2022-11-30 11:46:13 +00:00
Gordon McNab
7d8d3eca73
Fix transfers issues with FT9xx
...
Correct USB FIFO use for setup data phases (OUT transfers). We cannot stop traffic on the control endpoint so we set a flag and pull data from host when tinyUSB requests it from the USB FIFO. Extend this for all endpoints although currently not required.
Rename all instances of ft90x which can apply to ft93x as ft9xx.
Add support for the cdc_dual_ports example for ft9xx.
Add LED pin definition for board LED in a simple to access place on the Bridgetek MM900EVx boards.
2022-11-29 18:49:23 +00:00
Gordon McNab
1fce76ad47
Fix issue with the CDC SetLineCoding request
...
The SetLineCoding would fail as host would send the SETUP OUT phase before tinyUSB had setup a transaction for it. ft9xx port would ignore the transfer since there was no valid transaction setup for it. One SETUP data phase packet is cached now.
2022-11-28 17:41:00 +00:00
hathach
460bef9dbb
host msc example work well with rp2040 pio-usb
2022-11-21 15:49:38 +07:00
hathach
a6001fc8f2
update uart read for lpc18/43 for testing
2022-11-18 21:50:00 +07:00
kkitayam
2c9b5ddff0
Rename descriptor macros for consistency
2022-10-12 20:07:22 +09:00
kkitayam
aed8051f50
Add motion jpeg
2022-10-08 21:53:32 +09:00
kkitayam
3499aa2b21
Fix pointer
2022-10-06 21:10:27 +09:00
kkitayam
1debf62707
Fix compile errors
2022-09-13 21:22:02 +09:00
kkitayam
e80714740c
Change images to MJPEG
2022-09-13 21:22:02 +09:00
Ahmed El-Sharnoby
8a537a0092
Remove Hardcoded interface numbers from video descriptors
...
Removing the Hardcoded interface numbers from the video descriptors allow the user to add other interfaces before or after the Video Control Interface and Video Streaming Interface
2022-08-23 17:18:32 +02:00
Peter Lawrence
d1c61e33a6
add 'stm32l052dap52' (STM32L052K8 MCU) board target
...
'dap52' is Olimex's name of their STM32L052-based fork of 'dap42'
2022-08-03 12:31:37 -05:00
Ha Thach
ed2e587ace
Merge pull request #1568 from hathach/revert-hid-callback-len-temporarily
...
temporarily revert len back to uint8_t in tud_hid_report_complete_cb() 0.14.0 release
2022-07-19 12:16:32 +07:00
Ha Thach
2110e27678
Merge pull request #1531 from pigrew/usbtmc_highspeed
...
USBTMC: Fixes and support for high-speed USB
2022-07-18 22:20:43 +07:00
hathach
b495d6f8ec
temporarily revert len back to uint8_t in tud_hid_report_complete_cb() for up coming release
2022-07-17 22:56:07 +07:00
graham sanderson
fc1a27b6c9
RP@040: rework CMake for compiler warnings
2022-07-12 12:58:30 -05:00
hathach
4ea27acd1d
minor update to webusb serial example
2022-07-12 01:55:33 +07:00
Ha Thach
19956f070d
Merge pull request #1539 from hathach/improve-ci
...
Improve ci
2022-06-29 16:27:17 +07:00
hathach
5a378703fb
fix end symbol for samx7x and same5x
2022-06-29 15:05:09 +07:00
hathach
7949a4ec7c
skip freertos example for F1C100S
2022-06-29 14:12:58 +07:00
hathach
898b52be45
update rp2040 warnings
...
- remove "-Wno-stringop-overflow -Wno-array-bounds"
- skip -Wconversion for gcc 9 and prior
- suppress_tinyusb_warnings only when building with gcc 9 and below
2022-06-28 16:27:44 +07:00
hathach
83602ea123
Merge branch 'master' into rp2040_warning
2022-06-28 13:34:47 +07:00
graham sanderson
4057c2d8d9
rework suppress_tinyusb_warnings
...
* gcc 9.2.1 has some spurious -Wconversion warnings
* cmake 3.18 and above require set_target_properties to be added from the target directory (so added it to all examples)
* fixed a few warnings in a couple of examples
2022-06-27 22:43:41 +01:00
hathach
9c56f70111
suppress error with net example
2022-06-27 20:30:47 +07:00
hathach
dd7a17c345
prevent error on specific warnings for net lwip & dual example for rp2040
2022-06-27 17:53:42 +07:00
hathach
6522a8150e
fix all device examples warnings
2022-06-27 13:48:47 +07:00
hathach
1a1f633922
Merge branch 'master' into add-more-warnings
2022-06-27 12:50:50 +07:00
hathach
556b5d5044
change report len in hid API from uint8_t to uint16_t
...
since HS interrupt endpoint can be up to 1024, 8-bit is not enough.
affected APIs are:
- tud_hid_n_report() / tud_hid_report()
- tud_hid_report_complete_cb()
2022-06-27 12:22:36 +07:00
hathach
b9dc9dbd78
fix most warnings with rp2040 -wconversion
2022-06-27 11:50:17 +07:00
NConrad
3d4d37375b
USBTMC: Update test python code to use the new pyvisa namespace, and other misc fixes
2022-06-24 21:24:31 -04:00
hathach
1d6918ce41
suppress redundant-decls warnings for freertos examples
2022-06-24 21:53:46 +07:00
hathach
4f6e770eda
add more warning option, also fix -Wconversion with rp2040
...
-Wuninitialized, -Wunused, -Wredundant-decls
2022-06-24 19:46:19 +07:00
NConrad
4a9fe813a8
Update USBTMC descriptors to support high speed, set USB version to 2.0.0 for all cases.
2022-06-21 22:31:09 -04:00
hathach
905a0b2457
correct bulk size for highspeed endpoint in dynamic_configuration and usbtmc exmaples
2022-06-17 14:37:35 +07:00
hathach
9794a2b865
more example update
2022-06-06 22:41:04 +07:00
hathach
f4c80dd218
clean up example to use CFG_TUD_ENABLED + CFG_TUD_MAX_SPEED instead of CFG_TUSB_RHPORT0_MODE
2022-06-06 17:35:17 +07:00
