Jerzy Kasenberg
62a76c0e04
nrf52: Fix edpt_dma_start() wrong condition check
...
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.
This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
hathach
7d9efd0697
manually submit unplugged event for nrf dcd_disconnect()
2020-08-04 14:18:12 +07:00
hathach
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
...
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
hathach
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
hathach
58b99e59d4
detect if SD is actually present on the flash using SD magic
...
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
2020-05-05 23:07:56 +07:00
hathach
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
hathach
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
c8247f0907
fix zlp for nrf52840
2020-03-08 14:20:28 +07:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
hathach
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
hathach
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
hathach
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
hathach
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
hathach
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
hathach
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
hathach
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
hathach
2050778763
clean up
2019-05-01 20:41:26 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
hathach
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
hathach
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
hathach
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
hathach
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
hathach
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
hathach
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
hathach
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
hathach
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
777f41a066
clean up
2019-01-29 18:47:29 +07:00
hathach
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
hathach
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
hathach
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
hathach
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
hathach
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
hathach
00694b56c5
nrf5x: clean up dcd, add comment
2018-11-16 22:17:11 +07:00
hathach
b62ca2e5cd
nrf5x: correct control transfer direction
...
added dcd description.
2018-11-16 21:52:23 +07:00
Scott Shawcroft
30e3c64134
Polish up control split and treat it more like a normal endpoint.
2018-11-08 13:45:30 -08:00
Scott Shawcroft
7a40ec2647
Split out the control endpoint logic
2018-11-07 23:04:34 -08:00
Scott Shawcroft
c582c0fda9
Add SAMD21 and SAMD51 support for CircuitPython.
...
The ProtoThreads style subtasks were removed because it led to
extremely unclear control flow. RTOSes can be used if threading is
needed.
Also added some additional functionality to MSC to support dynamic
LUNs and read-only LUNs.
2018-11-07 12:02:28 -08:00
