hathach
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
hathach
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
Ha Thach
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
hathach
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
hathach
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
Tobias Ringström
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
hathach
d52b981c3a
revert ready() check in claim (do it later in separated PR)
2021-08-12 17:07:39 +07:00
hathach
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
hathach
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
Jerzy Kasenberg
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
hathach
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
hathach
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
hathach
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
hathach
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
hathach
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
Jerzy Kasenberg
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
hathach
2ea0ef4543
correct newline usage keycode (ENTER 0x28)
2021-08-10 16:40:43 +07:00
Robert Manzke
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
Stefan Kerkmann
8b78067cc1
Use linear buffer for GD32VF103
...
As the peripheral is the same as on the STM32F1 and STM32F4 lines we do the same.
2021-08-07 12:06:54 +02:00
Stefan Kerkmann
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
Stefan Kerkmann
7682829820
Add correct endpoint count for GD32VF103
...
This controller family only supports USB FS with four endpoints
2021-08-07 09:01:01 +02:00
Stefan Kerkmann
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
Ha Thach
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
MasterPhi
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
Stefan Kerkmann
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
Stefan Kerkmann
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
hathach
794bbd7177
fix warning
2021-08-02 18:58:27 +07:00
hathach
98e4ba6a12
correct midi available with already stream read
2021-08-02 18:55:12 +07:00
kkitayam
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
MasterPhi
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
MasterPhi
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
kkitayam
ff20e4d6bc
add the entry for RX72N
2021-07-29 20:45:51 +09:00
kkitayam
3c3563288d
add RX65N
2021-07-29 20:24:12 +09:00
kkitayam
6b9f8e454e
add a condition regarding OPT_MCU_RX63N
2021-07-29 20:24:12 +09:00
kkitayam
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
kkitayam
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
kkitayam
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
Ha Thach
fa00377d93
Merge pull request #859 from Wini-Buh/CCRX_Port
...
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-07-29 16:13:13 +07:00
MasterPhi
0ba4315ae5
Fix IAR warning
2021-07-27 18:08:52 +02:00
hathach
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
hathach
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
hathach
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
hathach
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
hathach
b35ad6edcb
clean up max packet size endian
2021-07-22 17:04:55 +07:00
hathach
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
Ha Thach
1c2bc47c07
Merge pull request #950 from HiFiPhile/dfu
...
DFU improvements
2021-07-22 11:17:01 +07:00
hathach
9542fcdbcd
rename CFG_TUD_DFU_TRANSFER_BUFSIZE to CFG_TUD_DFU_XFER_BUFSIZE
2021-07-22 01:00:06 +07:00
hathach
aff7b100ca
update dcd attr for samx7x
2021-07-22 00:28:37 +07:00
hathach
8ee1141a70
correct check
2021-07-22 00:12:01 +07:00
hathach
a9f3532252
more ci
2021-07-22 00:12:01 +07:00
