Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-24 05:42:57 +08:00
Code Issues Packages Projects Releases Wiki Activity
4,589 Commits 10 Branches 15 Tags
Commit Graph

743 Commits

Author SHA1 Message Date
Ha Thach
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning 
fix msp430 gcc 9.2.0 warning
 2020-08-02 12:53:03 +07:00
hathach
acde49ccc9
enable pull-up in dcd_init() instead of usbd 2020-08-01 20:14:58 +07:00
Ha Thach
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event 
correct isr context for nrf DCD_EVENT_UNPLUGGED
 2020-08-01 12:31:48 +07:00
hathach
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED 
also rename debug lookup to prevent conflict
 2020-08-01 12:02:59 +07:00
Jerzy Kasenberg
c3b0389f10 Fix synopsys size check for ISO endpoint 
Constraint was incorrect for ISO endpoint as stated in TODO.
 2020-07-31 15:52:21 +02:00
hathach
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs] 2020-07-29 17:04:47 +07:00
hathach
5af08e2ffc
fix strict prototype 2020-07-29 16:59:07 +07:00
Ha Thach
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos 
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
 2020-07-28 15:16:15 +07:00
me-no-dev
a1a390a788 Update dcd_esp32s2.c 2020-07-28 10:54:23 +03:00
hathach
6976e64217 fix msp430 gcc 9.2.0 warning in #465 2020-07-28 14:36:15 +07:00
Reinhard Panhuber
01903a4a6d Implement dynamic reallocation of RX and TX fifos for EP0. 
Tested with EP0 size 8/16/32/64.
 2020-07-27 21:03:20 +02:00
Reinhard Panhuber
5e3f90cd6e add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset 2020-07-26 19:21:30 +02:00
hathach
0407cfe16c fix samd21 race condition with setup packet 
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
 2020-07-23 01:39:15 +07:00
hathach
7baeea7a00 update actual link speed for spresense 2020-07-17 18:28:19 +07:00
hathach
dc00f0cae1
update link speed detection for nuc505 2020-07-16 20:44:06 +07:00
hathach
0517f4a2f1
dcd tdi report link speed on reset 2020-07-16 16:12:21 +07:00
Ha Thach
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to 
ESP32-S2: Detect EP IN Xfer Timeout
 2020-07-10 12:29:06 +07:00
hathach
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full 
update readme, boards.md to add link to new stm boards
 2020-07-08 16:29:48 +07:00
Ha Thach
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs 
Add stm hs
 2020-07-05 14:07:08 +07:00
Uwe Bonnes
fd38178189 STM32/OTG_HS: Allow OTG_HS port to run at FS speed. 
Add "REDUCE_SPEED=1" to the compile options.
 2020-07-03 10:52:57 +02:00
hathach
ad5ae8c31d
update per review 2020-07-03 14:50:39 +07:00
hathach
a09a86d299
fix NVIC disable typo 2020-07-03 01:19:02 +07:00
me-no-dev
d493724a7b ESP32-S2: Detect EP IN Xfer Timeout 
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
 2020-07-02 13:05:17 +03:00
hathach
4cec866994
correct HSE_VALUE in hal_conf 
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
 2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
 2020-07-02 11:58:40 +07:00
hathach
4966fb2e13 clean up 2020-07-02 01:25:21 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Uwe Bonnes
196bdbc702 st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now 
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
 2020-07-01 14:45:07 +02:00
hathach
d2450abaaf only set turnaround in reset complete 2020-07-01 18:51:04 +07:00
hathach
e3974d6869 correctly set turn around according to cpu clock 
help to run with low speed mcu
 2020-07-01 18:44:52 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
hathach
ed1b670c55 clean up code 2020-07-01 17:57:37 +07:00
me-no-dev
6178f8de2f ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs 
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
 2020-07-01 13:38:59 +03:00
Jan Dümpelmann
378e6aab8c Clear ep0_pending if rx short packet 2020-06-30 17:56:25 +02:00
Jan Dümpelmann
9e35ef73f7 Fix receiving of short packet data (ep out) 2020-06-30 12:55:39 +02:00
Uwe Bonnes
30a18e2605 stm32f723disco: USB HS enumerates. 2020-06-30 11:07:53 +02:00
Uwe Bonnes
05bfd9ac4a dcd_synopsys: Handle HS and FS IP in one device 
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file

F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
 2020-06-30 11:02:41 +02:00
hathach
ab75998316 Merge branch 'master' into add-stm-hs 2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support 
Support for DA1469x MCU from Dialog Semiconductor
 2020-06-30 01:20:56 +07:00
Ha Thach
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive 
Improvements to Synopsys EP OUT
 2020-06-29 16:02:40 +07:00
Jan Dümpelmann
99df7789a7 Add author name to dcd_synopsys.c 2020-06-29 10:55:03 +02:00
Jan Dümpelmann
4f69bcea7e Remove EP0 remaining bytes manipulation 
Renaming edpt_xact to edpt_schedule_packets
 2020-06-26 17:18:25 +02:00
Jeff Epler
b2ef8cdd42 dcd_samd: Provide implementation for OPT_MCU_SAME5X 2020-06-25 18:51:04 -05:00
hathach
d4d6e06c1d added OPT_MCU_SAME5X option 2020-06-24 00:53:17 +07:00
Jan Dümpelmann
067287ef91 Add transaction (edpt_xact) as sub transfer 
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
 2020-06-18 17:18:28 +02:00
Mengsk
9ffb9b69a4 Disable SOF in dcd_stm32_fsdev 
Signed-off-by: Mengsk <admin@hifiphile.com>
 2020-06-18 14:18:00 +02:00
Mengsk
57b553e023 Fix IAR warnings. 
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
 2020-06-17 10:08:33 +02:00
hathach
667eaa6dd6 fix stm32h743 priority with freeRTOS 2020-06-16 00:03:52 +07:00
hathach
2dd1be13e5 Enhance EP FIFO allocation for both Fullspeed and Highspeed 
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
  - Interrupt -> use EPSize
  - Bulk/ISO  -> use  max(EPSize, remaining-fifo / non-opened-EPIN)
 2020-06-15 23:17:49 +07:00
Jan Dümpelmann
4399dd1b06 cherry pick PR399 commit : Interrupt time improvements 2020-06-14 19:13:31 +07:00